VERSON WHEELON DIRECT ACTING FLUID FORMING HYDRAULIC FORMING PRESS
Model 41000R-50-164, FLEX-DIE RUBBER PAD
SPECIFICATIONS:
CAPACITY TONNAGE 41,000
FORMING PRESSURE: Maximum 10,000 P.S.I.
TRAYS: Two
Tray Size at Top 50 inches x 164 inches
Tray Area at 6 inches Depth 42½ inches x 157 inches
Tray Area at 10 inches Depth 37½ inches x 152 inches
(Filler Plates available reduces depth of Trays to 6 inches)
MOTOR DRIVES: All motors wired 440 volts
(2) Evacuate High Pressure Pumps 150 H.P. & 100 H.P.
(1) Accumulator Super Charge Pump 25 H.P.
(1) Pilot Pressure Pump 20 H.P.
(1) Vacuum and Cooler Pump 15 H.P.
(1) Cano-Micro Clean Oil Filter ¼ H.P.
CONTROLS: Wired 115 volts
Controls were updated 2009 to PLC.
(1) Operator Control Station, (2) Side Controls Stations located at
end of each Barrel with Emergency Stop Buttons.
EQUIPPED WITH:
(1) High Pressure Accumulator Pump.
(1) Throw Pad Roll-Up Device for each Table.
(1) Vacuum Pad Hold-Up System. PLC Electrical Starter Panels.
(1) Vacuum Tank, Capacity 240 gallons
COMPLETE FACTORY SAFETY GUARDS
![21,000 tons, Verson Wheelon Fluid Forming Press, Model 21000R-50-168, Forming Pressure 5,000 ps, Forming Depth 7.5", 1-tray, Serial Number 11197 [P5206-7107]](https://centurymachinery.com/wp-content/uploads/2021/04/7107-1_verson-wheelon-fluid-forming-press_21000R-50-168_form-press-5K-psi_depth-7-in_Serial-11197_two-photo-with-in-300x300.jpg "21000 Ton Verson Wheelon 21000R-50-168 Fluid Cell Forming Press Forming Pressure 5000 psi Forming Depth 7.5 inch with-in one trays, Serial Number 11197, Inventory Reference P5206-7107 - Century Machinery")
![2,500 tons, Verson Wheelon Fluid Forming Press, Model 2500R-20x50, Forming Pressure 5,000 psi, 2-trays, Forming Depth 3" and 4", Serial Number 27758 [P5206-6898]](https://centurymachinery.com/wp-content/uploads/2021/04/6898-1-verson-wheelon-fluid-froming-press-model-2500R-20x50-capacity-2500-tons-2-trays-forming-presssure-5000-psi-forming-depth-3-inch-4-inch-Serial-27758.docF_-300x300.jpg "2500 tons Verson Wheelon 2500R-20x50 Direct Acting Fluid Forming Press Forming Pressure 5000 psi Forming Depth with-in 2 trays 3 inch and 4 inch, Serial Number 27758, Inventory Reference P5206-6898 - Century Machinery")
