Description
VERSON WHEELON DIRECT ACTING FLUID FORMING HYDRAULIC PRESS
Model 29000R-50-116, FLEX-DIE RUBBER PAD, Serial Number 27296
SPECIFICATIONS: FLUID FORMIng
CAPACITY TONNAGE, 29,000
FORMING PRESSURE: thru 10,000 P.S.I.
TRAYS: Two
Tray Size at Top 50" x 116" (1,270mm x 2,946.4mm.
Right Tray Area at a 6 inch (152.4mm) Depth
42" x 109" (1,066.8mm x 2,768.6mm)
Left Tray Area at a 10 inch (254mm) Depth
37¾" x 104" (958.85mm x 355.5mm)
MOTOR DRIVES: wired 440 volts, 3 phase
(2) Evacuate High Pressure Pumps 75 H.P. & 150 H.P.
(1) ACC Pump 30 H.P.
(1) Pilot Pump 20 H.P.
(1) Vacuum Pump 15 H.P.
(1) Filter Pump 1/4 H.P.
CONTROLS: wired 115 volts
Operator Control Station located center of barrel.
(two) Side Controls Stations located at end of each Barrel
with Emergency Stop Buttons.
EQUIPPED WITH:
(1) Power Unit and Oil Reservoir.
(1) Nitrogen Intensifier Pump.
(2) Throw Pad Roll-Up Device for each Table.
(1) Accumulator Hydraulic Oil Storage Tank.
Electrical Starter Panels.
(1) Fluid Cell.
(1) Rubber Pad.
COMPLETE FACTORY SAFETY GUARDS
Dimensions 342.16" (8,690.86mm) L-R x 120" (3,048mm) FB x 187⅜"
(4,759,3mm) Height with Fill Lines.
Main Chamber with Fill Lines, Height above Ground 161⅞" (428.63mm)
Power Unit and Oil Reservoir F-B 96" x 178" (2,438.4mm x4,521.2mm.
Intensifier 33" x 33" x 132" Ht. (38.2mm x 838.2mm x 3,352.8mm)
Accumulator 80" diameter x 186" Ht. (2,032mm diameter x 4,724.4mm ht.)
Control Panel 144" LR x 18" FB x 91" Ht. (3,657.6mm FB x 457.2 FB x 2,311.4mm Ht.)
Approximate weight 363,700 lbs.
![8600 tons, Verson Wheelon Fluid Forming Press, Model 8600R-36-92, Forming Pressure 5,000 psi, Forming Depth 4.5" & 6", Serial Number 20995 [P5206-10521]](https://centurymachinery.com/wp-content/uploads/2021/04/10521-1-Verson-Wheelon-8600R-36x92-1-300x300.jpg "Verson Wheelon 8600R-36x92 Direct Acting Fluid Cell Forming Press Forming tonnage 8600 Forming pressure up to 5000 psi Forming depth 4.5 inch and 6 inch with-in two Trays, Serial number 20995, Inventory reference P5206-10521 - Century Machinery")
![60,000 Ton, Verson Wheelon Fluid Cell Forming Press, Model 60000R-50-240, Forming Pressure 10,000 psi, Forming Depth to 10", 2-trays, Depth 6" & 10", Serial Number 21600 [P5206-7106]](https://centurymachinery.com/wp-content/uploads/2021/04/7106-1_verson-wheelon-fluid-forming-press_60000R-50-240_form-press-10K-psi_50-in-x-240-in_depth-10-in_2-trays_Serial-21600-300x300.jpg "60000 Ton Verson Wheelon 60000R-50-240 Fluid Cell Forming Press Forming Pressure 10000 psi Forming Depth 6 inch and 10 inch with-in two trays, Serial Number 21600, Inventory Reference P5206-7106 - Century Machinery")
![13,000 Tons, Verson Wheelon Fluid Forming Press, Model 13000R-36-92, Forming Pressure 7,500 psi, Draw Depth with two trays 4.5" and 6", [P5206-10234]](https://centurymachinery.com/wp-content/uploads/2021/04/10234-1-verson-wheelon-fluid-froming-press13000R-36-92form-7500K-psi-4.5-in-_-6-in-Serial-20745-Chamber-LE-Front-300x252.jpg "- Century Machinery")
