700 tons, Sheridan Gray Sheet & Extrusion Stretch Former, Model L-700-96C-30, Jaw size 96″, Atriculate-Concave Jaws, Distance between jaws 480″, manual controls, Serial Number 104 [S8120-10030]

Model Number: L-700-96C-30

Serial Number: 104

Reference No: Longitudinal Sheet & Extrusion Stretch Former Press Machine & S8120-10030

Condition: Used

Mfg Date:

Model Number L-700-96C-30

Serial Number 104

Reference Number Longitudinal Sheet & Extrusion Stretch Former Press Machine & S8120-10030

Description

SHERIDAN GRAY LONGITUDINAL SHEET & EXTRUSION STRETCH FORMER
       Model L-700-96C-30,   Serial Number 104
SPECIFICATIONS
CAPABILITIES: Sheet Stretcher Leveling, Stretch Wrap Forming,
              Drape & Extrusion Forming.
7-JAWS: 
     Jaws Rotate. Swing Left or Right. Articulate.
     Adjust from Flat to Concave. Oscillation
     Number of Segment 7
     Length of Jaws 96"  (2,438.4mm).
     6 Jaws that create a Curved and 1-Centroid Jaw located in center.
     Swing Up +45º 
     Jaw Oscillation cylinder 14" stroke
     Oscillates Jaw Assembly 10 degrees
            each side of Centerline in Planes of Sheet.
     Jaw Assembly Rotates -22.5º / +270º 
     Capacity of each Carriage Jaw	 350 Ton
DISTANCE BETWEEN JAWS: Minimum: Jaws a center line of Table. 
     Maximum: with Jaw Support Extended 480" (12,192.00mm)
CARRIAGE: Moves in and out 264"  (6,705.6mm)
TENSION CYLINDER STROKE	36"  (914.4mm)
2-DIE TABLES: (Both located in center)
     T-Slotted Working Area (each) 24" x 78"
                              (609.6mm x 1,981.2mm)
     Each with Motorized Rise & Fall
1-OUTSIDE ROLLING DIE TABLE: (located in-front of left jaw carriage)
     T-Slotted Working Area 24" x 78" (609.6mm x 1,981.2mm)
     Motorized Rise & Fall     
 OPERATOR CONTROL STATION:
     Control Power On/Off Buttons.
     TC Pump On/Off Buttons.   Emergency Stop Button.
     Left & Right Carriage In/Stop/Out.  Left & Right Carriage Position.
     Left & Right Jaw Centroid Up/Down.   Left & Right Jaw Oscillation In/Out.
     Left & Right Jaw Rotation Counterclockwise.
     Left & Right Jaws Open / Close. Left & Right T.C Fast-Slow Mode.
     Left & Right Jaw Swing Up/Down.  Left & Right Jaw Straight & Curved.
     Left & Right TC Inboard & Outboard Rate.
     Left & Right TC In/Out Valve Current Meters.
     Left & Right Tension Cylinder Controls.
     Die Table Outside Section In Board/Stop/Out Board.
     Die Table Position. Die Table Up/Down.
MOTOR DRIVES: wired 440 volts
     one Hydraulic Pumps 75 HP 220/440 volts
     2- Jaw Carriages each screw driven by 25 HP 220/440 volts
     Table drives 7½ HP & 75 HP
EQUIPPED WITH:
     Operator Control Station.  Drawings & Operation Manual.
COMPLETE FACTORY SAFETY GUARDS
Current Replacement Cost $5,500,000.00