600 tons, Sheridan Gray Sheet Extrusion Stretch Wrap Former, Model E-600-24, Articulate 84″ Jaws, Swing left & right & oscillate, Stroke Length 288″, Die Length 192″ [S8120-10029]

Model Number: E-600-24

Serial Number:

Reference No: Sheet Extrusion Stretch Wrap Former & S8120-10029

Condition: Used

Mfg Date:

Model Number E-600-24

Serial Number

Reference Number Sheet Extrusion Stretch Wrap Former & S8120-10029

Description

SHERIDAN GRAY SHEET & EXTRUSION STRETCH WRAP FORMER
         Model E-600-24
SPECIFICATIONS
DIE TABLE IN VERTICAL PLANE
CAPABILITIES: Sheet Stretcher Leveling, Stretch Wrap Forming.
8-JAWS: 
  Jaws Rotate. Swing Left or Right. Articulate. Adjust from Flat to Concave. Oscillation
  Number of Segment 8
  Length of Jaws 84" (2,133.6mm)
  7 Jaws that create a Curved and 1-Centroid Jaw located in center.
  Jaw Oscillation cylinder 10" (254.mm) stroke, Oscillates Jaw Assembly 10 degrees
        each side of Centerline in Planes of Sheet.
  Jaw Assembly Rotates from Vertical.
  Capacity of each Carriage Jaw 300 Ton for a total of 600 Ton
WORK CAPACITY: Minimum Stock Length 0".   Maximum Stock Length 288" (7,315.2mm)
      Minimum Die Width for 180º Bend 81" (2,057.4mm).
      Maximum Die Width for 180º Bend 192"                                                                                                                                        (4,876.8mm)
DIE TABLE CAPACITY:
     Maximum – Sheet (with die backup adapter) 76"  (1,930.4mm)
     Minimum Thickness 1"  (25.4mm)
     Maximum Width 192" (4,876.8mm)
     Minimum Width 56" (1,422.4mm)
     Maximum Depth 84" (2,133.6mm)
DIE TABLE CYLINDER: Stroke 154" (3,911.6mm).
     Maximum Thrust @ 3000 psi. 1,240,000 lbs.
DIE HOLD DOWN CYLINDERS (two) Stroke each 18" (457.2mm)
TENSION CYLINDERS (two) Stroke each 60" (1,524mm)
     Maximum pull @ 3000 psi  642,000 lbs.
ARM ACTUATING CYLINDERS: (two) Stroke each 76" (1,930.4mm)
OPERATOR CONTROL STATION:
     Pump Start / Stop Buttons.
     Left-Hand & Right-hand Jaw Gripper Cylinders.
     Left Hand & Right-Hand Tension Cylinders.
     Left-Hand & Right-Hand Jaw Cylinders.
     Left Hand & Right-Hand Jaw Rotation and Oscillation Cylinders.
     Straightening Cylinder.  Jaw Curing Cylinders.   Pressure Gauges.
MOTOR DRIVES:  wired 460 volts
     Tension, Rotation, Oscillation & Jaw Cylinder Hydraulic Pumps each	150 HP 230/460 volts
     1 Arm Actuating Cylinder Pumps driven by