50 tons, Cyril Bath Vera V50 CNC Extrusion & Sheet Stretch Wrap Forming Press Machine, Distance between 8″ jaws 250″, Stroke 30″, Die length 78″, Serial Number B83170-3 H [S8120-10094]

Model Number: V-50 CNC

Serial Number: B83170-3

Reference No: CNC Extrusion & Sheet Stretch Wrap Forming Press Machine & S8120-10094

Condition: Used

Mfg Date:

Model Number V-50 CNC

Serial Number B83170-3

Reference Number CNC Extrusion & Sheet Stretch Wrap Forming Press Machine & S8120-10094

Description

CYRIL BATH STRETCH-WRAP PRESS MACHINE
  Model V-50,   Serial Number B83170-3
SPECIFICATIONS
TENSION CYLINDER PULL:
     Stroke 30"  (762mm)
     Net Area 58.9"  91,496.06mm)
TENSION CYLINDER SWING +/- 30 Degrees
TENSION CYLINDER BRACKET POSITIONING Infinite between Limits
ARM CYLINDER:
     Bore 7" (177.8mm)   Rod3.5" (8.9mm)   Stroke 50" (1,270mm), 
     Net Area (Wrapping 19.25" (488.95mm) Squared
ARM WRAP Controlled independently through 100 percent
JAW AXIAL ROTATION each Jaw +/- 90 Degrees
      Total +/- 180 Degrees 
DISTANCE BETWEEN JAWS: 
          Minimum 24"  (609.6mm)
          Maximum 250"  (6,350mm)
DIE LENGTH:
     180 Degree Bend @ Full Tonnage, Maximum 78"  (1,905mm)
     180 Degree Bend @ any Tonnage, Minimum 20"  (508mm)
DIE TABLE:  (2) T-Slots
     Working Surface, 72" W x 50" D x 36" Ht.
               (1,28.8mm x 1,270mm x 914.4mm)
MOTOR DRIVE: Wired 440 volts, 3-phase
     Hydraulic Pump 50 H.P. 220/440 volts, 3 Phase
     Right and Left Carriage (Two) 2 H.P. 220.440 volts
CENTER CONTROL STATION:
      with Cyril Bath Multi-Tasking Operating System.
      Program Cassette.   101 Keyboard.    CRT.
      L.T.C Servo Meter.   R-Arm Servo Meter.
      Power On/Off Buttons.  Hydraulic Pump On/Off Buttons.
      Left Carriage Movement Buttons.  Pressure Control.   
      Right  Carriage  Movement Buttons.  
Left Operators Station Located left side of Table: Emergency Stop Button.
     Left TC In/Out Button.   Left TC Stop.  Left Jaw Open/Close Buttons.
     Left Arm Back/Forward Buttons.  Snug Button.    Relax Button.
     Pressure Button.  Wrap Button.  Post Button.   Load Lock Button.  
     Open Both Jaws. 
Right Operator Station Locate right side of table: Emergency Stop Button.
     RTC In/Out Buttons. Right Arm Back/Foward Buttons.
     Right Arm Stop Button.    Right Jaw Open/Close Buttons. 
     Right Carriage In/Out Buttons.
Right & Left Jaw Operator Stations located on each Arm:      
     Emergency Stop Button. Tension Cylinder In/Out Buttons.
     Jaw Open/Close Buttons. 
EQUIPPED WITH:    
     1-Sets of Jaws.
     2-Die Post 
COMPLETE FACTORY SAFETY GUARDS
Approximate weight 40,000 lbs.