Versaform 70-Ton Stretch Wrap Forming Press, Model-DB70T, Distance between 8" jaws 334",LS
Versaform 70-Ton Stretch Wrap Forming Press, Model-DB70T, Distance between 8" jaws 334", ID TAG
Versaform 70-Ton Stretch Wrap Forming Press, Model-DB70T, Distance between 8" jaws 334", Operator Control Station
Versaform 70-Ton Stretch Wrap Forming Press, Model-DB70T, Distance between 8" jaws 334"
Versaform 70-Ton Stretch Wrap Forming Press, Model-DB70T, Distance between 8" jaws 334",RS-F

70 ton Versaform DB70T Extrusion Stretch Wrap Forming Press Distance between 8 inch diameter Gripper Jaws 334 inch, Serial number 169-SF-002, Inventory reference S8120-10535

Model Number: DB70T

Serial Number: 169-SF-002

Reference No: Extrusions and Sheet Metal Strech Wrap Forming Machine & S8120-10535

Condition: used

Mfg Date:

Model Number DB70T

Serial Number 169-SF-002

Reference Number Extrusions and Sheet Metal Strech Wrap Forming Machine & S8120-10535

Read More
Request Similar Item
1-213-627-2847
Categories: , Tags: , ,

Description

, VERSAFORM EXTRUSION STRETCH WRAP FORMING MACHINE
          Model DB70T,       Serial Number 169-SF-002

SPECIFICATIONS
FORMING TONNAGE 70
JAW AXIAL ROTATION  +/- 180 Degrees
DISTANCE BETWEEN JAWS  334" (8,483.6 mm)
OPERATING (psi)  2,000
TENSION CYLINDER STROKE  30" (762 mm)
TENSION CYLINDER SPEED, up to  30 ipm (762 mm/min.)
TENSION CYLINDER ROTATION  +/- 25 Degrees
ARM SWING (Each Arm)  Independent 
    10 Degrees Forward to 90 Degrees Back.
WRAPPING SPEED RANGE	 Adjustable
DIE LENGTH at FULL TONNAGE and 180 degrees Wrap:
   Minimum  18" (457 mm)
   Maximum  72" (1829 mm)
DIE TABLE: (4) FB-Slots & 3 LR Slots
   Working Surface, W x D  72" x 48" (1,828 mm x 1,219.2 mm)
   Height Table To Floor  36" (914 mm)
      (62) Pre-Drilled & Threaded Holes
MOTOR DRIVE: Wired 460 volts, 3 Phase
  Hydraulic Pump Swing Arms  50 hp. 230/460 volts
  Hydraulic Pump Pull Back Cylinders  40 hp. 230-460 volts
  Hydraulic Oil Cooler Fan  1/3 hp
CONTROLS: Hand Push Buttons, with Start and Stop Buttons
EQUIPPED WITH: (1) set 8" (203.2mm) Gripper Jaws
  (1) 6" (152.4mm) dimeter Jaw Cone1 set of Die Holder L Plates each 24" LR x 18" Ht
  (1 set) of Die Holder L Plates each 24" LR x 18" Ht
  (1 set) Tool Post Adjustable (threaded) 5” (127mm) diameter x 11" (279.4mm) Adjustable Height
  (1-set) V-Top Tool Holder 9" (228.6mm) Adjustable Height
  (1-lot) Miscellaneous Bolts, Wrenches and Blocking)
COMPLETE FACTORY SAFETY GUARDS

Dimensions Machine 96" LR x 180" FB x 103" Height
      (2,438.4mm LR x 4,572mm FB x 2,616.2 Height)
Dimensions, Operator Control Station 48" LR x 56" FB x 55" Height
                     (1,219.2mm LR x 1,422.4mm FB x 1397mm Height)
Weight Approximate 38,000 lbs.

NOTE PIT REQUIRED: All hydraulic lines from machine to operator control station run beneath forming table

Related products...