75 tons CYRIL BATH STRETCH-WRAP FORMING PRESS MACHINE
Model V-75, Serial Number 80204
SPECIFICATIONS
TENSION CYLINDER PULL:
Stroke 30" (762mm)
Bore 10" (254mm)
Net Area, 58.9 inches 2 (1,496.06mm)
Maximum Pull @ 2600 PSI 75 Tons
Minimum 5 Tons
TENSION CYLINDER SWING +/- 30 Degrees
TENSION CYLINDER BRACKET POSITIONING
Infinite between Limits
ARM CYLINDER:
Bore 7" (177.8mm)
Rod 3.5" (8.9mm)
Stroke 50" (1,270mm),
Net Area (Wrapping 19.25" (488.95mm) Squared
Maximum Thrust (Wrapping Force) @ 2500psi = 36Tons
ARM WRAP Controlled independently through 100 percent
JAW AXIAL ROTATION each Jaw +/- 90 Degrees
Total +/- 180 Degrees
DISTANCE BETWEEN JAWS:
Minimum 24" (609.6mm)
Maximum 350" (8,890mm)
DIE LENGTH:
180 Degree Bend @ Full Tonnage, Maximum 78" (1,905mm)
180 Degree Bend @ any Tonnage, Minimum 20" (508mm)
OPERATING (PSI) 2,500
DIE TABLE: (2) T-Slots
Working Surface, 72" W x 50" D x 36" Height
(1,28.8mm x 1,270mm x 914.4mm)
MOTOR DRIVE: Wired 440 volts, 3-phase
Hydraulic Pump 50 H.P. 220/440 volts, 3 Phase
Right and Left Carriage (Two) 2 H.P. 220.440 volts
CENTER CONTROL STATION:
Updated 1/22/98 with GEC. Alsthom Multi-Tasking Operating System.
With QNIX Operating System. Power Supply. Hard Drive.Floppy Disk.
101 Keyboard. Color CRT. IDE Removal Drive.
High Speed Communication Card. Modem Card.
Main Console Switch Layout: Power Key Lockout.
Power On/Off Switch. Hydraulic On/Off Switch.
T/C Pressure Control Potentiometer. OK to Start Hyd. Indicator.
Arm Forward/Back Switches. Tension Cylinder In/Out Switches.
Right & Left Jaw Operation Buttons. Low Oil Shutoff.
High Temp. Shutoff. Carriage Switches.
Tension Cylinder Pressure Control. Hydraulics Running.
Right & Left Jaw Operator Stations both with: Emergency Stop Button.
Jaw Open/Close Buttons. Jog In/Out Buttons.
Left Operators Station Located front of Table: Emergency Stop Button.
Snug Button. Unload Button. Pre Button. Wrap Button.
Arm T/C Stop. Post. Relax Button. Load Button. LTC In/Out
Button. LTC Stop. Left Arm Back/FWD., Left Arm Stop.
Left Carriage In/Out. Left Jaw Open/Close.
Open Both Jaws. D.C. Common.
Program Switches: These switches duplicate the functions on
the Console Programmable Switches.
Right Operator Station Locate front of table: Emergency Stop Button.
RTC In/Out Buttons. Right Arm Back/FWD Buttons.
Right Arm Stop Button. Right Jaw Open/Close Buttons.
Right Carriage In/Out Buttons. D.C. Common.
EQUIPPED WITH:
3-Sets of Jaws.
2-Die Post 4" (101.6mm) diameter.
Manual for: Press Operations. Calibration.
Machine Maintenance & Electrical Control System.
Manufacturers schematic drawings for: Hydraulics,
Electrical, Operation and Diagram Software.
Control Specifications.
COMPLETE FACTORY SAFETY GUARDS
Approximate weight 40,000 lbs.
![75 tons, Cyril Bath Vera V75 CNC Stretch Wrap Forming Press, Distance Between 8 inch Jaws 350", Stroke 30", Die Length 78", Serial Number 80204, [S8120-17166]](https://centurymachinery.com/wp-content/uploads/2021/06/17166-1_cyril-bath-cnc-stretch-wrap-forming-press_vera-V75_75T_BJ-350-in_Serial-80204_Overall-copy.jpg "75 Ton Cyril Bath Vera V75 CNC Stretch Wrap Extrusion & Sheet Forming Press Distance Between 8 inch Jaws 350 inch - Pull Back Stroke 30 inch - Die Length 78 inch, Serial Number 80204, Inventory Reference S8120-17166 - Century Machinery")
![75 tons, Cyril Bath Vera V75 CNC Stretch Wrap Forming Press, Distance Between 8 inch Jaws 350", Stroke 30", Die Length 78", Serial Number 80204, [S8120-17166]](https://centurymachinery.com/wp-content/uploads/2021/06/17166-2_cyril-bath-cnc-stretch-wrap-forming-press_vera-V75_75T_BJ-350-in_Serial-80204_Ctrl-F.jpg "75 Ton Cyril Bath Vera V75 CNC Stretch Wrap Extrusion & Sheet Forming Press Distance Between 8 inch Jaws 350 inch - Pull Back Stroke 30 inch - Die Length 78 inch, Serial Number 80204, Inventory Reference S8120-17166 - Century Machinery")
![75 tons, Cyril Bath Vera V75 CNC Stretch Wrap Forming Press, Distance Between 8 inch Jaws 350", Stroke 30", Die Length 78", Serial Number 80204, [S8120-17166]](https://centurymachinery.com/wp-content/uploads/2021/06/17166-3_cyril-bath-cnc-stretch-wrap-forming-press_vera-V75_75T_BJ-350-in_Serial-80204_Rear.jpg "75 Ton Cyril Bath Vera V75 CNC Stretch Wrap Extrusion & Sheet Forming Press Distance Between 8 inch Jaws 350 inch - Pull Back Stroke 30 inch - Die Length 78 inch, Serial Number 80204, Inventory Reference S8120-17166 - Century Machinery")
![75 tons, Cyril Bath Vera V75 CNC Stretch Wrap Forming Press, Distance Between 8 inch Jaws 350", Stroke 30", Die Length 78", Serial Number 80204, [S8120-17166]](https://centurymachinery.com/wp-content/uploads/2021/06/17166-4_cyril-bath-cnc-stretch-wrap-forming-press_vera-V75_75T_BJ-350-in_Serial-80204_Ctrl-Station.jpg "75 Ton Cyril Bath Vera V75 CNC Stretch Wrap Extrusion & Sheet Forming Press Distance Between 8 inch Jaws 350 inch - Pull Back Stroke 30 inch - Die Length 78 inch, Serial Number 80204, Inventory Reference S8120-17166 - Century Machinery")
![Hufford A-10 Stretch Wrap Forming Press, Distance between 4" jaws 219", 17.5 tons, Tension Cylinder Stroke18½", Simultaneous Arms Movement, ID H081 [S8120-10025]](https://centurymachinery.com/wp-content/uploads/2021/04/10025-1-hufford-stretch-wrap-forming-press-A-10-17.5-T-4-in-jaws-BJ-219-intension-cyl-str-18.5in-Simultaneous-Arms-Serial-H081-LS-F-300x300.jpg "Hufford A-10 Stretch Wrap Forming Press Distance between 4\" jaws 219\" - 17.5 tons - Tension Cylinder Stroke18½\", Simultaneous Arms Movement, ID H081, Inventory reference S8120-10025 - Century Machinery")
![10 tons, Cyril bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between jaws 113", Jaws Rotate, Swing Right - Left and Tilt up-down, rise and fall each, Independent Arm Movement, Serial Number 101103, [S8120-10232]](https://centurymachinery.com/wp-content/uploads/2021/04/10232-1-Cyril-Bath-V10-CNC-Stretch-Former-Quad-Axis-Serial-101103-Front-Right-Side-Quad-Axis-Jaw-Carriage-Assembly-_-Die-Clamps-300x300.jpg "10 tons, Cyril bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between jaws 113\", Jaws Rotate, Swing Right - Left and Tilt up-down, rise and fall each, Independent Arm Movement, Serial Number 101103, [S8120-10232] - Century Machinery")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-3-Cyril-Bath-V10-Stretch-Former-Serial-101104-Nova-Changeover-F-RS-300x300.jpg "10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113\", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233] - Century Machinery")
