Description
CYRIL BATH CNC EXTRUSION STRETCH WRAP FORMING PRESS
Model V10, QUAD AXIS Serial Number 101104 Mfg. Oct. 2001
FORMING TONNAGE 10
DISTANCE BETWEEN JAWS:
Maximum Length of Part with Tension Cylinders fully retracted 113" (2,870.2 mm)
Minimum Length of Part with Tension Cylinders fully extended 27" (685.8 mm)
TENSION CYLINDER STROKE (Adjustable) each 43" (1,092.2 mm)
TENSION CYLINDER PULL (Adjustable)
30,000 lbs. @ Operating PSI 3,200
GRIPPER JAW AXIAL ROTATION +/- 180 Degrees
GRIPPER IN:
High Operation position 14-916" (380.05mm)
Low operation position 19-9/16" (496.89mm)
Load position 20-13/16" (528.64mm)
CENTER OF TENSION CYLINDER CARRIAGE PIVOT to TOP OF ARM:
High Operation height 23½" (647.7mm)
Low Operation height bottom of Gripper 18½" (469.9mm)
Load Position 17¼" (438.15mm)
TENSION CYLINDER MOVEMENT: Rise and Fall
Swings: 25° Back and Forward 25°
Tilts: UP / Down / Up +/- 10°
ARM SPEED WRAP up to 3 DEGREES / SEC
ARM SPEED RETURN up to 5 DEGREES / SEC
ARM SWING BACK (each Arm has Independent Movement) 82 DEGREES
WRAPPING SPEED RANGE Adjustable
DIE TABLE: 25 Pre-drilled & threaded.
Working Surface 56" W x 41"D v(1,422.4 x1041.4mm)
Height Table to Floor 37" (939.8 mm)
MOTOR DRIVE: Wired 460 volts, 3 Phase.
Hydraulic Pump 25 H.P. 230/460 volts.
Circulating Pump 1 H.P. 230/460 volts.
CONTROLS: CNC Controls with: Programmable Keypad, CRT, and
Hand Function Buttons
Remote Stop Button on each Arm
EQUIPPED WITH:
Nova Gantry Die Changeover System & Rotary Table.
Hydraulic Gripper Jaws.
4-Hyd Tool Clamps. Heat Exchanger.
Trabon Maxi-Monitor Mark 111 Auto Lube System.
COMPLETE FACTORY SAFETY GUARDS
Dimensions 264" LR x 130" FB x 84½" Ht.
Power Unit 37⅝" FB x 59½" LR x 70¾" Ht.
Electrical Cabinet 14" FB x 48" LR
Approximate weight 24,000 lbs.
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-3-Cyril-Bath-V10-Stretch-Former-Serial-101104-Nova-Changeover-F-RS.jpg "10233-3, Cyril Bath V10 Stretch Former, Serial 101104, Nova Changeover, F-RS")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-2-Cyril-Bath-V10-Stretch-Former-Serial-101104-Quad-Axis-Jaw-Carriage-Assembly-_-Die-Clamps-Front-Right-Side.jpg "10233-2, Cyril Bath V10 Stretch Former, Serial 101104, Quad Axis Jaw Carriage Assembly _ Die Clamps, Front-Right Side")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-4-Cyril-Bath-V10-Stretch-Former-Serial-101104-Close-up-Die-Holders-and-Quard-Jaw-Holders.jpg "10233-4, Cyril Bath V10 Stretch Former, Serial 101104, Close-up Die Holders and Quard Jaw Holders")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-5-Cyril-Bath-V10-Stretch-Former-Serial-101104-Down-View-Tbl-_-4-Clamps.jpg "10233-5, Cyril Bath V10 Stretch Former, Serial 101104, Down View Tbl _ 4-Clamps")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-6-Cyril-Bath-V10-Stretch-FormerClose-Up-Jaw-Holder-_-4-Die-Clamps.jpg "10233-6, Cyril Bath V10 Stretch Former,Close-Up Jaw Holder _ 4-Die Clamps")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-7-Cyril-Bath-V10-Stretch-Former-Serial-101104Nova-Changeover-Ctl-Counsel-with-CRT-_-Op-Clts.jpg "10233-7, Cyril Bath V10 Stretch Former, Serial 101104,Nova Changeover, Ctl Counsel with CRT _ Op Clts")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-8-Cyril-Bath-V10-Stretch-Former-Serial-101104-CU-Op-Counsel-CRT-Programing-Keys-_-Hand-Clt.jpg "10233-8, Cyril Bath V10 Stretch Former, Serial 101104, CU Op Counsel CRT, Programing Keys, _ Hand Clt")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-9-Cyril-Bath-V10-Stretch-Former-Serial-101104-CU-Operator-Hand-Controls.jpg "10233-9, Cyril Bath V10 Stretch Former, Serial 101104, CU Operator Hand Controls")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-10-Cyril-Bath-V10-Stretch-Former-Serial-101104-Pwr-Unit.jpg "10233-10, Cyril Bath V10 Stretch Former, Serial 101104, Pwr Unit")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-12-Cyril-Bath-V10-Stretch-Former-Serial-101104-Rear-RS-Clt-Cab-_-Pump.jpg "10233-12, Cyril Bath V10 Stretch Former, Serial 101104, Rear RS, Clt Cab _ Pump")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-13-Cyril-Bath-V10-Stretch-Former-Serial-101104CU-Trabon-Maxi-Monitor-Mark-111-Lubriquip.jpg "10233-13, Cyril Bath V10 Stretch Former, Serial 101104,CU Trabon Maxi Monitor Mark 111, Lubriquip")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-14-Cyril-Bath-V10-Stretch-Former-Serial-101104-view-looking-up-at-Nova-Gantry-Die-Changeover.jpg "10233-14, Cyril Bath V10 Stretch Former, Serial 101104, view looking up at Nova Gantry Die Changeover")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-15-Cyril-Bath-V10-Stretch-Former-Serial-101104-Partial-view-of-Nova-Die-Changeover-motor-drives.jpg "10233-15, Cyril Bath V10 Stretch Former, Serial 101104, Partial view of Nova Die Changeover motor drives")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-16-Cyril-Bath-V10-Stretch-Former-Serial-101104-CU-Nova-Die-Changeover-Drives-for-TOOL-CHANGER.jpg "10233-16, Cyril Bath V10 Stretch Former, Serial 101104, CU Nova Die Changeover Drives for TOOL CHANGER")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-17-Cyril-Bath-V10-Stretch-Former-Serial-101104-Nova-Die-Changeover-Part-Turn-Table.jpg "10233-17, Cyril Bath V10 Stretch Former, Serial 101104 , Nova Die Changeover Part Turn Table")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-1xx-PHOTO-IN-PLANT-cyril-bath-stretch-former-with-Nova-Gantry-Die-Changeover.jpg "10233-1xx, PHOTO IN PLANT cyril bath stretch former with Nova Gantry Die Changeover")
![20 Tons, Cyril Bath CNC Dual Parts Extrusion Stretch Wrap Forming Press Machine, model V-20, Distance between primary jaws 168", Distance between second jaws 92.5", Carriage travel 39", Serial M10307 [S8120-9476-1]](https://centurymachinery.com/wp-content/uploads/2021/04/9476-1_cyril-bath-cnc-dual-jaws_single-plain-stretch-wrap-forming-press_V-20_mfg-03_F-1-300x300.jpg "20 Tons, Cyril Bath CNC Dual Parts Extrusion Stretch Wrap Forming Press Machine, Model V-20, Distance between primary jaws 168\", Distance between second jaws 92.5\", Carriage travel 39\", Serial M10307 [S8120-9476-1] - Century Machinery")
![Hufford A-10 Stretch Wrap Forming Press, Distance between 4" jaws 219", 17.5 tons, Tension Cylinder Stroke18½", Simultaneous Arms Movement, ID H081 [S8120-10025]](https://centurymachinery.com/wp-content/uploads/2021/04/10025-1-hufford-stretch-wrap-forming-press-A-10-17.5-T-4-in-jaws-BJ-219-intension-cyl-str-18.5in-Simultaneous-Arms-Serial-H081-LS-F-300x300.jpg "Hufford A-10 Stretch Wrap Forming Press Distance between 4\" jaws 219\" - 17.5 tons - Tension Cylinder Stroke18½\", Simultaneous Arms Movement, ID H081, Inventory reference S8120-10025 - Century Machinery")
![18 tons, Custom Extrusion Stretch Wrap Forming Press Machine, Distance between 4" Jaws 128", Die length 40", Simultaneous Arm Move, Jaw Head swivels, Serial Number 788 [S8120-10218]](https://centurymachinery.com/wp-content/uploads/2021/04/10218-1-custom-stretch-wrap-forming-press-18-T-4-in-jaws-BJ-128-in-die-L-40-in-Simultaneous-Arm-Move-dead-swivel-RLSerial-788-F-300x263.jpg "18 tons, Custom Extrusion Stretch Wrap Forming Press Machine, Distance between 4\" Jaws 128\", Die length 40\", Simultaneous Arm Move, Jaw Head swivels, Serial Number 788 [S8120-10218] - Century Machinery")
