Description
ONSRUD PIN ROUTERS
Model A1124-A, Serial Number 9174
Condition Re-built to order.
SPECIFICATIONS:
THROAT DEPTH 24" (609.6mm0
SPINDLE:
Spindle Nose, 4 Double Taper Type Collet
Speed, 2-Range 10,000 and 20,000 R.P.M.
Travel 0 thru 3¾" (85.73mm)
By pneumatic cylinder foot actuation to valve holds spindle at lowered position.
Depth Stop, Positive Type, Adjustable to 3-positions.
Brake, Dynamic Electric, engages when Stop Button is depressed.
Spindle Lubrication, Oil Mist Generator with Air Electric Solenoid.
TABLE:
Size 26" FB x 36" LR 660.4mm x 9144mm)
Vertical Height Adjustment, by hand crank 13" 9330.2mm)
Travel 27" (685.8mm)
Table Tilts 15º Up and 45º Down
MOTOR DRIVE: wired 440 volts, 3 Phase Only
Two Speeds 7½ H.P. and 7½ H.P. (5.52kw & 5.5kw))
ELECTRIC CONTROLS: Control wired voltage 110
Start/Stop Buttons.
Spindle Speed Selector Switch.
EQUIPPED WITH:
(1) Table Guide Pin (Screw in type)
(1) Collets: ½" (12.7mm)
Bearing Micro Fog Lubricator.
COMPLETE FACTORY SAFETY GUARDS
Dimensions: 36" LR x 59" FB x 59¼" height
(914mm x 1,498.6mm x 1504.95mm)
Approx. Weight 2720 lbs. (1,233.8kg)
THE FOLLOWING WILL BE PERFORMED:
(a) All New Spindle Bearings,
(b) Check Quill Bushing,
(c) Check Spindle & Drive Balance,
(d) Align Table Knee Assembly,
(e) Check Motor Bearings.
(f) New Drive Belt,
(f) Check Spindle Pneumatic Cylinder O-Rings,
(g) Check Pneumatic Foot Trip,
(h) All New Pneumatic Supply Lines,
(i) Check Bearings Oil Mist Lubrication System,
(j) Check all Electric Function and make any necessary repairs.
(k) Re-Paint.
![Onsrud Radial Arm Router, Model A1R, One Arm with 2 segments, 84" reach Spindle to cc of Column, 8 hp, 14,700 rpm 250 cycles, 230v, Serial Number 7933 [R8903-1646]](https://centurymachinery.com/wp-content/uploads/2021/04/1646_onsrud-double-arm-radial-router_A1ARR-300x300.jpg "Onsrud A1R Single Radial Arm Router with 8 hp 14700 rpm 250 cycles 230 volts Router Spindle and 84\" reach to cc of column Serial Number 7933, Inventory Reference R8903-1646 - Century Machinery")
![Onsrud Pin Router, Model W-1136, Spindle Speed 10,000-20,000 rpm, Motor Drive 5 hp, 480 volts, 2-AXIS T-Slotted Table 28" x 33", Serial Number 8295 [R8903-6752]](https://centurymachinery.com/wp-content/uploads/2021/04/6752_onsrud-pin-router_W-1136_36-in_10K-20Krpm_5-hp_480v_2-axis-T-slotted-tbl-28-in-x-33-in_Serial-8295-300x300.jpg "Onsrud W-1136 Pin Router Throat Depth 36 inch, Spindle Speed 10000 & 20000 rpm, Motor Drive 5 hp, 480 volts, with 2-AXIS T-Slotted Table 28 inch x 33 inch, Serial Number 8295, Inventory Reference R8903-6752 - Century Machinery")
![Onsrud Pin Router, Model A1124-A, Throat Depth 24", Spindle Speeds 10,000-20,000 rpm, Motor Drive two speed at 10 hp and 7.5 hp 460 volts,Serial Number 897890 [R8903-9539]](https://centurymachinery.com/wp-content/uploads/2021/04/9539-1_onsrud-pin-router_A1124-A_10K-20Krpm_7.5-10-hp_25-in-x-36-in_Late-Frame_Serial-897890-1_F-1-300x300.jpg "Onsrud A1124-A Pin Router Throat Depth 24 inch Drive 10 hp and 7.5 hp 460 Spindle Speeds 10000 & 20000 rpm, Serial Number 897890, Inventory Reference R8903-9539 - Century Machinery")
![Onsrud Radial Arm Router, Model A1AR, One Arm 3-Segments, Reach124" cc column, 15,000 rpm, Router Head 10 hp, 380 volts 250 cycles, Serial Number 6786 [R8903-5351-1]](https://centurymachinery.com/wp-content/uploads/2021/04/5351-1-onsrud-radial-arm-router-model-A1ARR-router-spindle-8-hp-speed-14750-rpm-3-segment-arm-1-300x270.jpg "Onsrud Radial Arm Router, Model A1AR, One Arm 3-Segments, Reach124\" cc column, 15,000 rpm, Router Head 10 hp, 380 volts 250 cycles, Serial Number 6786 [R8903-5351-1] - Century Machinery")
