Onsrud Radial Arm Router, Model A1AR, One Arm 3-Segments, Reach124″ cc column, 15,000 rpm, Router Head 10 hp, 380 volts 250 cycles, Serial Number 6786 [R8903-5351-1]

Description

ONSRUD RADIAL ARM ROUTER
   Model  A1ARR,   Serial Number Base 6786

SPECIFICATIONS
ONE ARMS: with Three Segments.
ARM MOVEMENT Horizontal over Work Table.
ARM REACH:  Maximum
   Centerline of Spindle to Centerline of Column Pivot 124" Maximum
   Capable of over reaching on Table, Approximate 4' x 12'
ROUTING HEAD: Mfg. Continental Electric
   10 H.P. 15,000 R.P.M., 380 volts, 250 cycles
   Spindle Nose, Double Taper Collet
EQUIPPED WITH:
   Hand Brake.
   Spindle Lock.
   Power Feed Control.
   Return Spring to stabilize return of head.
   Offset Collar with Coolant Nozzle.
   Spray Mist Lubricator.
FREQUENCY CONVERTER and DRIVE MOTOR is Wired 460 Volts, 3-phase
   15 KW. 250 Cycles, 380 Volts
   Driven by 20 H.P. 230/460 Volts
ELECTRIC CONTROLS: Control voltage 115.
   Start/Stop Buttons.
   Spindle Speed Selector Switch.
COMPLETE FACTORY SAFETY GUARDS

THE FOLLOWING TO BE PERFORMED:  
   (1) Routing Spindle New Bearing and Balanced.
   (2) Follower Assembly Inspected and replace any defective parts if required.   
   (3) Router Slide Inspected and Pneumatic Dive Cylinder Re-Pack and replace any defective fittings if required.   
   (4) All Pneumatics Lines replaced.  
   (5) Pneumatic Connector inspected and if required replace fittings. 
   (6) Arm Pivot Joint Inspected and checked for balance, replace rubber Bumpers.
   (7) Frequency Converter and Drive Motor Inspected, replace bearings Test Run and if required replace any other necessary parts.   
   (8) All Electric and Controls Contacts inspected, cleaned and if required replaced any defective parts.  
   (9) Paint unit to customer color.