Description
VERSON HYDROFORM HYDRAULIC PRESS
Model F1-20-6-7 Serial Number
SPECIFICATIONS:
BLANK DIAMETER, Maximum 20"
PUNCH DIAMETER, Maximum 15"
DRAW DEPTH, Maximum 7"
PRECHARGE: Gain and Forming Pressure 6,000 PSI
PUNCH FORCE, Maximum 368 Tons
CHAMBER RETURN per minute 266"
PUNCH STRIPPING per minute 318"
OIL CAPACITY – Gallons 100
CONVENTIONAL HYDRAULIC PRESS: (Optional)
Tonnage, Maximum 1000
Stroke Platen maximum 9¾"
Shut Height Bolster – Platen 5¼"
Daylight Stroke Up 15"
Area of Platen, 26" FB x 26" RL
Area of Bolster, 30" FB x 26" RL
Area Between Guide Posts, 18" FB x 18" RL
Rapid Advance Speed by Gravity
Pressing Speed per minute 4.0"
Rapid Return Speeds per minute 266"
EQUIPPED WITH:
Round Chamber.
(1) Side Tool Shuttle Table.
(1) Rear Tool Shuttle Table.
Magnetic Control Panel.
CONTROLS wired 115 volts
Operator Push Button Controls
MOTOR DRIVE: wired 440 volts, 3-phase
Hydraulic Pump (each) 75 H.P. 220/440 volts
COMPLETE FACTORY SAFETY GUARDS
Floor Space 71” FB x 48" RL Height above Floor 146",
Approximate Weight 34,000 lbs.
![13,000 Tons, Verson Wheelon Fluid Forming Press, Model 13000R-36-92, Forming Pressure 7,500 psi, Draw Depth with two trays 4.5" and 6", [P5206-10234]](https://centurymachinery.com/wp-content/uploads/2021/04/10234-1-verson-wheelon-fluid-froming-press13000R-36-92form-7500K-psi-4.5-in-_-6-in-Serial-20745-Chamber-LE-Front-300x252.jpg "- Century Machinery")
![41,000 Tons, Verson Wheelon Fluid Cell Forming Press, Model 41000R-50-164, Forming Pressure 10,000 psi, two Trays Forming Depth 7" & 10" [P5206-15923]](https://centurymachinery.com/wp-content/uploads/2021/04/5923-1verson-wheelon-fluid-froming-press41000R-50-168form-press-10K-psidepth-7-in-10-in-300x300.jpg "41000 Tons Verson Wheelon Fluid Cell Forming Press Model 41000R-50-164, Forming Pressure 10000 psi, two Trays Forming Depth 7 inch & 10 inch, Inventory Reference P5206-15923 - Century Machinery")
![8600 tons, Verson Wheelon Fluid Forming Press, Model 8600R-36-92, Forming Pressure 5,000 psi, Forming Depth 4.5" & 6", Serial Number 20995 [P5206-10521]](https://centurymachinery.com/wp-content/uploads/2021/04/10521-1-Verson-Wheelon-8600R-36x92-1-300x300.jpg "Verson Wheelon 8600R-36x92 Direct Acting Fluid Cell Forming Press Forming tonnage 8600 Forming pressure up to 5000 psi Forming depth 4.5 inch and 6 inch with-in two Trays, Serial number 20995, Inventory reference P5206-10521 - Century Machinery")
