Description
CINCINNATI HYDROFORM HYDRAULIC PRESS
Model 12-15-7, Serial Number 4C1V1Y-Z
SPECIFICATIONS:
FLUSH FLOOR MOUNT, NO PIT REQUIRED
Four Post
BLANK DIAMETER, Maximum 12" (3404.8mm)
DRAW DEPTH, Maximum 7" (177.8mm)
FORMING PRESSURE, Maximum 15,000 PSI
BLANK GAUGE Maximum 3/8" 0.375” (8.89mm) Steel
OIL CAPACITY – Gallons 200
OIL COOLED Water Cooled
MOTOR DRIVES: Wired 440 volts, 3 phase
Radial Piston Pump 50 H.P., 1200 R.P.M.
20 G.P.M. at 5,000 PSI
Super Charging 20 H.P., 1200 R.P.M.
3 G.P.M. at 8,000 PSI
Vane Type Pump 3 H.P., 1200 R.P.M.
5 G.P.M. at 500 PSI
Centrifugal Pump and Motor 1 H.P.
40 G.P.M.
CONTROLS:
Start and Stop Pump Selector Control.
Pressure Regulating Cam.
Control Drum. Interlock Lever.
Form Speed Control Dome Control Lever.
Punch Control Lever. Dome Charge Lever
EQUIPPED WITH:
2-Pressure Gages.
Electrical Control Panel.
COMPLETE FACTORY SAFETY GUARDS
Floor Mounted No Pit Required
Dimension: 134" LR x 69" FB x 115" HT.
(3,403.6mm x 12,752.6mm x 2,921mm)
Weight Approximate 38,600 lbs.
![Cincinnati Hydroform Hydraulic Fluid Forming Press, Model 12-15-7, 15,000 psi Forming Pressure, Blank Diameter 12", Draw depth 7", Flush Floor Mounted, Serial 4C1V1Y-Z [P5206-5795]](https://centurymachinery.com/wp-content/uploads/2021/04/5795_cincinnati-hydroform-press_size-12-15-7_round-chamber_four-post-design_Serial-4C1V1Y-Z.jpg "Cincinnati 12-15-7 Hydroform 4-Post Hydraulic Fluid Forming Press - Forming Pressure 15000 psi - Blank Diameter 12\" and Draw Depth 7\" - Flush Floor Mounted, Serial Number 4C1V1Y-Z, Inventory Referencve P5206-5795 - Century Machinery")
![13,000 Tons, Verson Wheelon Fluid Forming Press, Model 13000R-36-92, Forming Pressure 7,500 psi, Draw Depth with two trays 4.5" and 6", [P5206-10234]](https://centurymachinery.com/wp-content/uploads/2021/04/10234-1-verson-wheelon-fluid-froming-press13000R-36-92form-7500K-psi-4.5-in-_-6-in-Serial-20745-Chamber-LE-Front-300x252.jpg "- Century Machinery")
![41,000 Tons, Verson Wheelon Fluid Cell Forming Press, Model 41000R-50-164, Forming Pressure 10,000 psi, two Trays Forming Depth 7" & 10" [P5206-15923]](https://centurymachinery.com/wp-content/uploads/2021/04/5923-1verson-wheelon-fluid-froming-press41000R-50-168form-press-10K-psidepth-7-in-10-in-300x300.jpg "41000 Tons Verson Wheelon Fluid Cell Forming Press Model 41000R-50-164, Forming Pressure 10000 psi, two Trays Forming Depth 7 inch & 10 inch, Inventory Reference P5206-15923 - Century Machinery")
