Description
VERSON WHEELON DIRECT ACTING HYDRAULIC FORMING PRESS
Model 41000R-50-164, FLEX-DIE RUBBER PAD
SPECIFICATIONS: FLUID FORMING
CAPACITY TONNAGE 41,000
FORMING PRESSURE:
Maximum 10,000 P.S.I.
TRAYS: Two Tray
Size at Top 50" x 164" (1,270mm X 4,165.67mm)
Tray Area at 6" (152.4mm) Depth 42½" x 157"
(1,079.5mm x 3,987.8mm)
Tray Area at 10" (25.4mm) Depth 37½" x 152"
(952.5mm x 3,860.8mm)
(Filler Plates available reduces depth of Trays to 6")
MOTOR DRIVES: All motors wired 440 volts.
(2) Evacuate High Pressure Pumps 150 hp. & 100 hp.
(110.3 kw & 73.6 kw)
(1) Accumulator Super Charge Pump 25 hp. (18.4 kw)
(1) Pilot Pressure Pump 20 hp. (14.7 kw)
(1) Vacuum and Cooler Pump 15 hp. (11.03 kw)
(1) Cano-Micro Clean Oil Filter ¼ hp. (0.183 kw)
CONTROLS: wired 115 volts
Controls were updated 2009 to PLC.
(1) Operator Control Station.
(2) Side Controls Stations located at end of each Barrel with Emergency Stop Buttons.
EQUIPPED WITH:
(1) High Pressure Accumulator Pump.
(1) Throw Pad Roll-Up Device for each Table.
(1) Vacuum Pad Hold-Up System. PLC Electrical Starter Panels.
(1) Vacuum Tank, Capacity 240 gallons
COMPLETE FACTORY SAFETY GUARDS
![41,000 Tons, Verson Wheelon Fluid Cell Forming Press, Model 41000R-50-164, Forming Pressure 10,000 psi, two Trays Forming Depth 7" & 10" [P5206-15923]](https://centurymachinery.com/wp-content/uploads/2021/04/5923-1verson-wheelon-fluid-froming-press41000R-50-168form-press-10K-psidepth-7-in-10-in.jpg "41000 Tons Verson Wheelon Fluid Cell Forming Press Model 41000R-50-164, Forming Pressure 10000 psi, two Trays Forming Depth 7 inch & 10 inch, Inventory Reference P5206-15923 - Century Machinery")
![41,000 Tons, Verson Wheelon Fluid Cell Forming Press, Model 41000R-50-164, Forming Pressure 10,000 psi, two Trays Forming Depth 7" & 10" [P5206-15923]](https://centurymachinery.com/wp-content/uploads/2021/04/5923-2verson-wheelon-fluid-froming-press41000R-50-168form-press-10K-psidepth-7-in-10-in.jpg "41000 Tons Verson Wheelon Fluid Cell Forming Press Model 41000R-50-164, Forming Pressure 10000 psi, two Trays Forming Depth 7 inch & 10 inch, Inventory Reference P5206-15923 - Century Machinery")
![Cincinnati Hydroform Hydraulic Fluid Forming Press, Model 12-15-7, 15,000 psi Forming Pressure, Blank Diameter 12", Draw depth 7", Flush Floor Mounted, Serial 4C1V1Y-Z [P5206-5795]](https://centurymachinery.com/wp-content/uploads/2021/04/5795_cincinnati-hydroform-press_size-12-15-7_round-chamber_four-post-design_Serial-4C1V1Y-Z-300x300.jpg "Cincinnati 12-15-7 Hydroform 4-Post Hydraulic Fluid Forming Press - Forming Pressure 15000 psi - Blank Diameter 12\" and Draw Depth 7\" - Flush Floor Mounted, Serial Number 4C1V1Y-Z, Inventory Referencve P5206-5795 - Century Machinery")
![13,000 Tons, Verson Wheelon Fluid Forming Press, Model 13000R-36-92, Forming Pressure 7,500 psi, Draw Depth with two trays 4.5" and 6", [P5206-10234]](https://centurymachinery.com/wp-content/uploads/2021/04/10234-1-verson-wheelon-fluid-froming-press13000R-36-92form-7500K-psi-4.5-in-_-6-in-Serial-20745-Chamber-LE-Front-300x252.jpg "- Century Machinery")
![60,000 Ton, Verson Wheelon Fluid Cell Forming Press, Model 60000R-50-240, Forming Pressure 10,000 psi, Forming Depth to 10", 2-trays, Depth 6" & 10", Serial Number 21600 [P5206-7106]](https://centurymachinery.com/wp-content/uploads/2021/04/7106-1_verson-wheelon-fluid-forming-press_60000R-50-240_form-press-10K-psi_50-in-x-240-in_depth-10-in_2-trays_Serial-21600-300x300.jpg "60000 Ton Verson Wheelon 60000R-50-240 Fluid Cell Forming Press Forming Pressure 10000 psi Forming Depth 6 inch and 10 inch with-in two trays, Serial Number 21600, Inventory Reference P5206-7106 - Century Machinery")
