hardinge second-operation super precision lathe, model DSM-59, swing 9 inch, swing cross slide 6 inch, hole 1.250 inch, VS 150-3500 rpm,6-posit turret, Serial DV-59-10566, F, 10515-1
hardinge second-operation super precision lathe, model DSM-59, swing 9 inch, swing cross slide 6 inch, hole 1.250 inch, VS 150-3500 rpm,6-posit turret, Serial DV-59-10566, LS-F, 10512-2
hardinge second-operation super precision lathe, model DSM-59, swing 9 inch, swing cross slide 6 inch, hole 1.250 inch, VS 150-3500 rpm,6-posit turret, Serial DV-59-10566,RS-F, 10515-3
hardinge second-operation super precision lathe, model DSM-59, swing 9 inch, swing cross slide 6 inch, hole 1.250 inch, VS 150-3500 rpm,6-posit turret, Serial DV-59-10566, LS-R, 10515-4
hardinge second-operation super precision lathe, model DSM-59, swing 9 in, swing cross slide 6 in, hole 1.250 in, VS 150-3500 rpm,6-posit turret, Serial DV-59-10556, R-Ph Converter, 10515-5
hardinge second-operation super precision lathe, model DSM-59, swing 9 in, swing cross slide 6 in, hole 1.250 in, VS 150-3500 rpm,6-posit turret, Serial DV-59-10556, Rear, 10515-6
hardinge second-operation super precision lathe, model DSM-59, swing 9 in, sw cross slide 6 in, hole 1.250 in, VS 150-3500 rpm,6-posit turret, Serial DV-59-105, Cross Slide & Turret, 10515-7
hardinge second-operation super precision lathe, model DSM-59, swing 9 in, sw cross slide 6 in, hole 1.250 in, VS 150-3500 rpm,6-posit turret, Serial DV-59-105,CU Cross Slide & Turret, 10515-8
hardinge second-operation super precision lathe, model DSM-59, swing 9 in, sw cross slide 6 in, hole 1.250 in, VS 150-3500 rpm,6-posit turret, Serial DV-59-105, CU Cross Slide, 10515-9
hardinge second-operation super precision lathe, model DSM-59, swing 9 in, sw cross slide 6 in, hole 1.250 in, VS 150-3500 rpm,6-posit turret, Serial DV-59-105, CU Ways & Turret, 10515-10
hardinge second-operation super precision lathe, model DSM-59, swing 9 in, sw cross slide 6 in, hole 1.250 in, VS 150-3500 rpm,6-posit turret, Serial DV-59-105, CU Turret Tlg, 10515-11
hardinge second-operation super precision lathe, model DSM-59, swing 9 in, sw cross slide 6 in, hole 1.250 in, VS 150-3500 rpm,6-posit turret, Serial DV-59-1Rear Turret & Cross Slide, 10515-12
hardinge second-operation super precision lathe, model DSM-59, swing 9 in, sw cross slide 6 in, hole 1.250 in, VS 150-3500 rpm,6-posit turret, Serial DV-59-105, CU Motor Drive, 10515-13
hardinge second-operation super precision lathe, model DSM-59, swing 9 in, sw cross slide 6 in, hole 1.250 in, VS 150-3500 rpm,6-posit turret, Serial DV-59-105,,CU Spdl, Speed Clt, 10515-14
hardinge second-operation super precision lathe, model DSM-59, swing 9 in, sw cross slide 6 in, hole 1.250 in, VS 150-3500 rpm,6-posit turret, Serial DV-59-105, CU Clt. Buttons, 10515-15
hardinge second-operation super precision lathe, model DSM-59, swing 9 in, sw cross slide 6 in, hole 1.250 in, VS 150-3500 rpm,6-posit turret, Serial DV-59-105, CU Phase-A Matic, 10515-16
hardinge second-operation super precision lathe, model DSM-59, swing 9 in, sw cross slide 6 in, hole 1.250 in, VS 150-3500 rpm,6-posit turret, Serial DV-59-105, CU Clt Pump tag, 10515-17
hardinge second-operation super precision lathe, model DSM-59, swing 9 inch, swing cross slide 6 inch, hole 1.250 inch, VS 150-3500 rpm,6-posit turret, Serial DV-59-10 S-N, 10515-18

Hardinge DSM-59 Second Operation Super Precision Lathe Swing 9″ – Swing Cross Slide 6″ – Thru Hole 1¼” – Variable Spindle Speed 150 thru 3500 rpm – 6-position Turret w/Tooling, Serial Number DV-59-10566, Inventory Reference L4805-10515

Model Number: DSM-59

Serial Number: DV-59-10566.

Reference No: Second Operation Lathe & L 4805-10515

Condition:

Mfg Date:

Model Number DSM-59

Serial Number DV-59-10566.

Reference Number Second Operation Lathe & L 4805-10515

Read More
Request Similar Item
1-213-627-2847
Categories: , Tags: , ,

Description

HARDINGE SECOND OPERATION LATHE
     Model DSM-59,   SUPER PRECISION,
     Serial Number DV-59-10566

SPECIFICATIONS:
CAPACITY:
   Swing Over Bed 9" (228.6mm)
   Swing Over Cross Slide 6" (152.4mm)
   Length of Bed 36" (914.4mm)
SPINDLE BORE DIAMETER 1¼" (31.75mm)
SPINDLE SPEEDS: Infinitely Variable 150 thru 3,500 rpm
  (Power driven spindle speed change)
DOUBLE TOOL CROSS SLIDE:
   Travel of tool cross slide 3¾" (95.25mm)
TURRET: 6-Positions
   Travel turret slide 4" (101.6mm)
   Height above bed to center Turret Tool Hole 4½" (114.3mm)
COLLET CAPACITY: Size 5C 
   Round 1-1/16" (26.99mm),
   Hexagon 7/8" (22.23mm),
   Square 3/4" (19.05mm)
MOTOR DRIVES: WIRED TO RUN ON 220 volts, Single Phase
   Main 1½ H.P., 230/460 volts
   Spindle Speed Change Drive 1/20 hp. 230/460 volts
   Coolant Pump 1/10 hp., 230/460 volts
CONTROLS: Wired 115 volts
   Pull Start/Push Stop Button. Spindle Brake/Off Switch.
   Coolant On/Off Auto Switch.   Spindle RPM Indicator.
   Fast/Slow Switch.   Spindle Forward/Reverse Switch.
EQUIPPED WITH:
   PHASE-A MATIC POWER  CONVERTER
   1-Collet Closer (fast acting lever type.
   18-Miscelleneous Collets.
   1-Coolant Pump.
   Swing Down Chip & Coolant Guard.
   Turret Tooling with:
      1-Slide Tool.
      4-Tool Holder Extensions.
      1-Drill Chuck 3/8” with key
      1-Adjustable Knee Tool Holder.
   Double Tool Cross Slide with:
      3-Riser Stages.
      1-Multiple Tool Holders D7.
      1-Cut-Off Tool Holder.
      1-Circular Form Tool Holder.
COMPLETE FACTORY SAFETY GUARDS

Dimensions: 67" L-R  x 30" F-B x 56¾" Height
   (1,701.8mm L-R x 762mm F-B x 1,441.45mm Ht)
Weight Approximate 1000 lbs.

Related products...

  • Sharp 1118H Super Precision Lathe 11 inch x18 inch cc, Inch-MM Dual Gear Box-Vriable Speed 125-3K rpm-3&4 jaw chucks-DRO- Serial CTL-1479-Mfg10-030-ref 10598-1a

    11″ swing x 18″ centers Sharp 1118H Super Precision Engine Lathe with Digital Variable Speed 130-4000 rpm – 3 Jaw Chucks – Date Mfg 10-2003, Serial Number CTL-1479 Inventory Reference L3000-10598

    Read more

    11″ swing x 18″ centers Sharp 1118H Super Precision Engine Lathe with Digital Variable Speed 130-4000 rpm – 3 Jaw Chucks – Date Mfg 10-2003, Serial Number CTL-1479 Inventory Reference L3000-10598

    11″ swing x 18″ centers Sharp Model 1118H Super Precision Engine Lathe

    Model Number 1118H Super Precision

    Serial Number CTL-1479

    Reference Number Engine Lathe, Precision & L3000-10598

    Read More
    1-213-627-2847
    Categories: , , Tags: ,
  • hardinge super precision lathe,11 inch swing x 18 inch cc, model HLV-H-EM, Inch-Metric Dual Gear Box, sw cross slide 6 inch, VS 125-3K rpm, 3 & 4 jaw chks, DRO, Serial HLV-13030-T, F
    Request Similar Item

    11″ x 18″,Hardinge Super Precision Lathe, Model HLV-H-EM, Inch-Metric Dual Gear Box, Swing Cross Slide 6″, Spindle Speeds variable 125-3,000 rpm, 3 & 4 Jaw Chucks, DRO, Serial Number HLV-13030-T [L3000-10546]

    Read more

    11″ x 18″,Hardinge Super Precision Lathe, Model HLV-H-EM, Inch-Metric Dual Gear Box, Swing Cross Slide 6″, Spindle Speeds variable 125-3,000 rpm, 3 & 4 Jaw Chucks, DRO, Serial Number HLV-13030-T [L3000-10546]

    Hardinge Super-Precision Lethe is a combination of best practice, design and manufacturing of hardware and software integrated into a machine tool that provides the highest level of precision for production turning centres that require the least amount of human intervention in the marketplace today.

    Model Number HLV-H English Metric

    Serial Number HLV-H-10510-T

    Reference Number Lathes Precision & L3000-10546

    Read More
    Request Similar Item
    1-213-627-2847
    Categories: ,
  • 11" swing x 18" centers, Hardinge Super Precision Engine Lathe, Model HLV-H, Swing Cross Slide 6", Variable Speed 125-3,000 rpm, taper, 3 & 4 Jaw Chucks, Serial Number HLV-H-10510-T [L3000-10500]
    Request Similar Item

    Hardinge HLV-H Super Precision Engine Lathe 11″ swing x 18″ centers – Swing Cross Slide 6″ – Variable Speed 125-3000 rpm with Taper Attachment, 3 & 4 Jaw Chucks, Inventory Reference L3000-10500

    Read more

    Hardinge HLV-H Super Precision Engine Lathe 11″ swing x 18″ centers – Swing Cross Slide 6″ – Variable Speed 125-3000 rpm with Taper Attachment, 3 & 4 Jaw Chucks, Inventory Reference L3000-10500

    Hardinge HLV-H Super Precision Engine Lathe 11″ swing x 18″ centers

    Model Number HLV-H Super Precision

    Serial Number HLV-H-10510-T

    Reference Number Engine Lathe, Precision & L3000-10500

    Read More
    Request Similar Item
    1-213-627-2847
    Categories: , , Tag: