Description
ERCO 250 ton LONGITUDINAL SHEET STRETCH WRAP FORMER
SPECIFICATIONS
CAPABILITIES: Sheet Stretcher Leveling, Drape Forming.
6- INDEPENDENT GRIPPER JAWS which are located on:
(two) Jaw Carriages with an over-all width each of 120" (3,048mm)
Jaws are adjustable between centers on each carriage.
Width of each Jaws 16" (406.4mm)
Jaws have built in angle of approximate 10º
Jaw Carriage angle back Right or Left 45º
Hydraulic Gripping
CAPACITY OF EACH JAW CARRIAGE is approximately 125 Ton
DISTANCE BETWEEN JAWS: Maximum 68" (1,727.2mm)
DIE TABLE: 2T-Slotted
Working Area 12" x 97" (304.8mm x 2,463.8mm)
Rise & Fall 20" (508mm)
Tilts or Angles Up and Down 15º
OPERATOR CONTROL STATION
PUMP CONTROLS: Pump On / Off Buttons. Emergency Stop Button.
Start / Stop Buttons. Controls On / Off Buttons.
LEFT- & RIGHT-HAND CARRIAGE, Each with: On / Off Buttons.
Front & Back Digital Read-Outs. Three Position Switch: Front / Both / Back.
Carriage Movement Forward / Back Buttons.
DIE TABLE: Up/Down Switch. Front / Back Switch. Rise & Fall Vari Speed Knob.
Digital Read-Outs
PRESSURE GAUGES (three). Pressure Adjustment Control
MOTOR DRIVES: wired 440 volts
Hydraulic Pumps 40 HP 220/440 volts
EQUIPPED WITH:
Operator Control Station.
12-Gripper Jaws.
COMPLETE FACTORY SAFETY GUARDS
![17.5 tons, Hufford A-10 Extrusion Stretch Wrap Forming Press Machine, Distance between 4" jaws 219", Tension Cylinder Stroke18.5", Simultaneous Arms Movement, ID BHW-P 361 [S8120-10219]](https://centurymachinery.com/wp-content/uploads/2021/04/10219-1-hufford-stretch-wrap-forming-press-A-10-17.5-T-4-in-jaws-BJ-219-intension-cyl-str-18.5in-Simultaneous-Arms-ID-BHW-P-361-F-LS-229x300.jpg "Hufford A-10 Extrusion Stretch Wrap Forming Press Machine, Distance between 4\" jaws 219\", Tension Cylinder Stroke18.5\", Simultaneous Arms Movement, ID BHW-P 361, Inventory Reference S8120-10219 - Century Machinery")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-3-Cyril-Bath-V10-Stretch-Former-Serial-101104-Nova-Changeover-F-RS-300x300.jpg "10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113\", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233] - Century Machinery")
![60 tons, Hufford A-12 Extrusion & Sheet Stretch Wrap Forming Press Machine, Distance between jaws Minimum 28", Maximum 264", Sheet Jaws 20 inch wide, Extrusion Gripper Jaws 6 inch, Tension Cylinder Stroke 30", Independent Arm Movement, Serial Number 40, [S8120-10342]](https://centurymachinery.com/wp-content/uploads/2021/04/10342-1-hufford-A-12-extrusion-_-sheet-stretch-wrap-former-60-T-BJ-28-inch-260-inch-20-inch-sheet-jaws-die-length-72-inch-Serial-40LS-F-300x300.jpg "Hufford A-12 Extrusion & Sheet Stretch Wrap Forming Press Machine - 60 tons - Distance between jaws Minimum 28\" - Maximum 264\" - Sheet Jaws 20\" wide and Extrusion Gripper Jaws 6 inch - Tension Cylinder Stroke 30\", Independent Arm Movement, Serial Number 40, Inventory Reference S8120-10342 - Century Machinery")
