Best Like New Eckold 320.774AC Piccolo Kraftformer Power Shrinking Stretching – Planisher and Doming Machine Throat Depth 14″, Condition Like New, Serial Number 154-4549, Inventory Reference S5160-9946

Model Number: 320.74AC

Serial Number: 154-4549

Reference No: KRAFTFORMER – SHRINKER – STRETCHER – PLANISHING and DOMING MACHINE & S5160-9946

Condition: Used

Mfg Date:

Model Number 320.74AC

Serial Number 154-4549

Reference Number KRAFTFORMER – SHRINKER – STRETCHER – PLANISHING and DOMING MACHINE & S5160-9946

Description

ECKOLD PICCOLO POWER KRAFTFORMER – SHRINKER –  
         STRETCHER – PLANISHING & DOMING MACHINE
         Model KF 320.74AC,  Serial Number 154-4549
SPECIFICATIONS
THROAT DEPTH REACH. 14"  (355.6mm)
THROAT VERTICAL HEIGHT:
     Gap (less tooling). 9½"  (241.3mm)
     Vertical tooling clearance. 6⅜" - 7½"  (161.8mm thru 190.5mm)
ADJUSTMENT OF RAM: Sensitive Pressure Adjustment.
     by Hand Wheel. 1.30"  (33.02mm) by Geared Motor 1.18"  (45.72mm)
STROKES PER MINUTE. 8 and 400
MACHINE ANGLES Up and Down.
FORMING CAPACITY:
     Deep drawing Steel 400 N / 2.0 mm. 0.08"   (2.03mm)
     Aluminum 250 N / 2.5 mm (Light metal) 0.10"  (2.54mm)
     Stainless Steel 600 N / 1.5 mm.  0.060"  (1.524mm)
MOTOR DRIVE  Wired 460 volts, 3-phase
     KW. 1.5
CONTROLS VOLTAGE. 110
     Start / Stop Buttons. High / Low Stroke Buttons.
     Located at rear, Two position Locked Key Switch to change stroke speed.
ADJUSTABLE WORKING HEIGHT
EQUIPPED WITH:
      Sensitive Pressure Adjustment.
      Electro-Mechanical adjustment with Foot pedal control.
       All tooling quick change feature.
       1-set Concentric or Spot Shrinking Flattening Tools FWS 60S & LFS60S.
       1- Planishing Tool TP15S(with 3 rubber inserts). 1¾" (44.45mm)  diameter Top
       1- Planishing Tool TP25S (with 3 rubber inserts). 1¾" (44.45mm) diameter Top
       1- Planishing Tool TP40S (with 3 rubber inserts)  3⅛" (79.375mm) diameter Top
       1- Planishing & Straightening Tool TP 40S (with 1 rubber insert) 1⅝" (41.28mm) dia.Top            
       1- Planishing & Straightening Tool   (with 1 rubber insert)  1” (25.4mm) diameter Top
       1- Planishing & Straightening Tool  (with 1 rubber insert)  1-3/8” (34.93mm) diameter Top     
       1- Reforming Tool Carrier (Bottom Holder) for finish forming & calibrating of pre-formed parts.
       1-set Reforming Tools 50 R (Top & Bottom) for finish forming & calibrating of pre-formed parts.
       Mounted on casters.
COMPLETE FACTORY SAFETY GUARDS
Dimensions 26" L-R x 48" F-B x 63½" 
Height  Approximate weight 740 lbs.