Description
SAVAGE ABRASIVE & FRICTION SAWING MACHINE
Model RS-1030, Serial Number 1030-87-237
SPECIFICATIONS
SAW BLADE DIAMETER 26" (660.4mm)
CUTTING SPEEDS: 1430 RPM
CHOP STROKE 24" - 26" (609.6mm thru 660.4mm)
SAW CARRIAGE: Head Oscillator. Pneumatic actuated hydro-check with self-return of cutting head.
Automatic wheel wear compensator limits return of cutting wheel to pre-set height above
material.
STOCK FEED (AUTOMATIC) Length Adjustment, Variable ¼" thru 48" ( 6.35 thru 1,219.2mm)
By Gripper Jaws with automatic cycle. Machine is stopped by electric counter or by Operator.
Single auto and individual control of each sequence is possible.
MOTOR DRIVE: (Kalamazoo Conveyor) wired 460 volts, 3 phase
Main Spindle 30 hp. 1750 RPM, 230/460 volts
Oscillation Head ¾ hp. 230/460 volts
Coolant Pump 2 hp. 208-230/460 volts
Monlan Coolant Filter System ½ hp. 230/460 Volts
OPERATORS CONTROL STATION:
Spindle Start/Stop Buttons, Auto Cycle Start/Stop,
Oscillator (Manual/Off/Auto Switch),
Coolant Manual/Stop/Auto Switch,
Read Lion Series 600 Digital Part Counter w/ Readout.
Start Counter and Preset Counter, Start Count Switch
(Load/Run), AMP Load Meter, Manual Cut Button,
Material Unclamp and Clamp Switch,
Mode (Manual/Auto Switch),
Bar Feed (Unclamp/Clamp and Out/In Switch),
Length Gauge (Out/Off/In Switch),
Stock Feed Speed Dial, EMERGENCY STOP ALL BUTTON
CONTROLS: *GE Series One Programmable Controller* Controls Wired 115 volts
D.C. Spindle Motor Brake, Retract Speed Control., NEMA 12 Enclosure.
EQUIPPED WITH:
(1) 12-foot Servo Stock Pusher System with Clamping.
(1) Roller Conveyor 13" wide x 120" long.
Enclosed Hood Assembly,
(1) Coolant Pump, (1) Coolant Tank 100 gallons capacity, 24 gallon.
Kalamazoo Conveyor for: Swarf Trolly, Whirlstream ceramic hydrocyclone, and filter pump.
Water distributors, Flow Control Valve, and Splash Guards.
COMPLETE FACTORY SAFETY GUARDS
![26" Savage Abrasive & Friction Sawing Mchine, Model RS-1030, Autofeed 0.25 - 48", 30 hp, Oscillatring Head, Automatic Stock Feed, GE Series 1 Pogrammable Controller, Serial Number1030-87-237 [S0555-6771]](https://centurymachinery.com/wp-content/uploads/2021/04/6771-1-savage-abrasive-saw-model-RS-1030-blade-26-inch-autofeed-0.25-48-inch-30-hp-oscillatring-head-ge-ctrl-Serial-1030-87-237.jpg "6771-1, savage abrasive saw, model RS-1030, blade 26 inch, autofeed 0.25 - 48 inch, 30 hp, oscillatring head, ge ctrl, Serial 1030-87-237")
