Description
CR. ONSRUD INVERTED ROUTER
Model 200210 Serial Number 36010802 Date Mfg. 2001
SPECIFICATIONS
CAPACITY
SPINDLE:
Acura Flex Collet Type
Capacity thru 3/4"
Plunge Vertical, Variable Adjustment thru 3”
By Adjustment Dial. (Pneumatically)
SPINDLE SPEED
Electronic Variable Speed Ranges 12,500 thru 25,000 rpm.
THROAT DEPTH
Front of table offset to center of spindle 13½"
TABLE SIZE: 43½" LR x 31½" FB
MOTOR Wired 460 volts, 3 phase
Drive 10 hp. 230 / 460 volts
CONTROLS: *Wired 115 volts
Start / Stop Buttons. Plunge Speed Adjustment Dial. Litetek Warning Light.
Spindle Speed Adjustment Dial. RPM Meter 0 – 12500 & 0 – 25000.
Motor Percent Load Meter. Drive Belt Tension On / Off Switch. Low Spindle Oil -
Warning Light. Current Hour Run Meter. Magnetek GPD 515 Solid State Speed
Control. Remote Start / Stop Buttons located under table, front right side. Spray Mist
Lubricator Control switch located under table, front left side. Spindle Up / Down Foot -
Switch. Both Access Doors equipment with electrical power shut off switches.
EQUIPPED WITH:
Spindle Lubrication by Norgren Combo unit. (set at 20 psi -10 drops per minute.
Spray Master Lubricator System with Magnetic Base spray - nozzle holder.
(1) ¾” Collet and Nut.
(1) ½” Collet and Nut.
(1) ¼” Collet and Nut.
(1) 3/8” Collet and Nut.
(2) Table Insert open.
(1) Table Insert for Off-set Guides.
(18) miscellaneous Off-Set Guides.
(1) 1⅜" Wrench.
(1) Spanner Wrench.
Dust Collection outlet 4” (100 mm).
(2) Eye Safety Shields with Magnetic Base.
Built-in fork lift tubes.
COMPLETE FACTORY SAFETY GUARDS
Dimensions 66” F-B x 43” L-R x 42” Height
Approximate Weight 1750 lbs.
![Onsrud Pin Router, Model W1124A, Throat Depth 24", Spindle Speeds 10,000 - 20,000 rpm, Motor Drive 7.5-5 hp, 460v, Table 25" x 36", Late Frame, Serial Number 11053 [R8903-5005]](https://centurymachinery.com/wp-content/uploads/2021/04/5005_onsrud-pin-router_W-1124_24-in_10K-20Krpm_7.5-10-hp_25-in-x-36-in_Late-Frame_Serial-11053-300x300.jpg "Onsrud Pin Router, Model W1124A, Throat Depth 24\", Spindle Speeds 10,000 - 20,000 rpm, Motor Drive 7.5-5 hp, 460v, Table 25\" x 36\", Late Frame, Serial Number 11053 [R8903-5005] - Century Machinery")
![Onsrud Pin Router, Model W-1136, Spindle Speed 10,000-20,000 rpm, Motor Drive 5 hp, 480 volts, 2-AXIS T-Slotted Table 28" x 33", Serial Number 8295 [R8903-6752]](https://centurymachinery.com/wp-content/uploads/2021/04/6752_onsrud-pin-router_W-1136_36-in_10K-20Krpm_5-hp_480v_2-axis-T-slotted-tbl-28-in-x-33-in_Serial-8295-300x300.jpg "Onsrud W-1136 Pin Router Throat Depth 36 inch, Spindle Speed 10000 & 20000 rpm, Motor Drive 5 hp, 480 volts, with 2-AXIS T-Slotted Table 28 inch x 33 inch, Serial Number 8295, Inventory Reference R8903-6752 - Century Machinery")
