Description
BROWN AND SHARPE SURFACE GRINDER
Model 1224, Dial-A-Size, Type Reciprocating Table
Serial Number 523-1224-410
SPECIFICATIONS:
CHUCK: Electro-Magnetic, Size 12" W x 24" L x 5" Ht.
(304.8mm x 609.6mm x 127mm)
Hitachi, Fine Line, 40-1224, Serial Number 53950-5
TABLE: (1) T-Slot, Working Surface:
12" W x 32-1/2" L (304.8mm x 825.5mm)
Longitudinal Movement of Table Infinitely Variable
thru 32" (76.2mm)
Transverse Movement 12" (304.8mm)
Longitudinal Movement by Hand and Automatic
Transverse Movement by Hand and Automatic
GRINDING WHEEL: 12" diameter x 1" face (304.8mm x 25.4mm)
GRINDING WHEEL ASSEMBLY:|
Hand and Automatic with Incremental Down Feed
MOTOR DRIVES: Wired 440 volts
Spindle 5 H.P. 220/440 volts
Hydraulic Pump 2 H.P. 220/440 volts
Coolant Pump ¼ H.P. 220/440 volts
CONTROLS:
Cycle Start Button.
Emergency Stop Button.
Wheel Retract Button.
Wheel Advance Rapid/Slow Switch
(Momentary must hold In).
Wheel Feed Button.
Spindle Start/Stop Buttons.
Manual /Auto Switch.
MM/IN. Switch and Actuation Button.
Coarse Feed / Forward Off Back Switch.
Surface & Slot Switch.
Coarse Feed Amount Dial- w/ Left Feed/
Slot IN (.00)/MM (.0).
Coarse Feed Limit Set Button/Light.
Fine Feed Amount Dial w/ IN (.000) /MM (.00).
Fine Feed Limit Dial.
Right Feed Slot (Rear – Surface Dial .00 (In) /.0 (MM).
Wheel Offset Button (Up) .00"/.002 (MM).
Wheel Offset Button (Down) .0001"/. 002 (MM).
Wheel Position Set - Button/Light.
Rapid Approach Limit Set Button/Light.
Retract Limit Set Button/Light.
Table Part Dress Compensate Button.
Diamond Feed Set- Dial .00(In.)/.0(MM).
Spark-Out Light and Dial (0 thru 9).
EQUIPPED WITH:
Two-Axis DRO.
(1) Grinding Wheel Hub.
Coolant Pump and Tank, Oil Cooler.
Magnetic Chuck Demagnetizer and Neutrofier.
COMPLETE FACTORY SAFETY GUARDS
![12" x 24" Brown & Sharpe Surface Grinder, Dial-A-Size, Model 1224, 3-axis Power Feed, Incremental Down Feed, in-mm, 2-axis DRO, Electro Magetic Chuck, Serial Number 523-1224-410 [G8025-6772]](https://centurymachinery.com/wp-content/uploads/2021/04/6772-1-brown-_-sharpe-surface-grinder-capacity-12-inch-x-24-inch-dial-a-size-model-1224-3-axis-power-feed-incremental-down-feed-in-mm-2-axis-dro-electromagetic-chuck-Serial-523-122F.jpg "12\" x 24\" Brown & Sharpe Dial-A-Size Model 1224 Surface Grinder with 3-axis Power Feed and Incremental Down Feed with Inch-Metric 2-axis DRO, Serial Number 523-1224-410, Inventory Reference G8025-6772 - Century Machinery")
![12" x 24" Brown & Sharpe Surface Grinder, Dial-A-Size, Model 1224, 3-axis Power Feed, Incremental Down Feed, in-mm, 2-axis DRO, Electro Magetic Chuck, Serial Number 523-1224-410 [G8025-6772]](https://centurymachinery.com/wp-content/uploads/2021/04/6772-2-brown-_-sharpe-surface-grinder-capacity-12-inch-x-24-inch-dial-a-size-model-1224-3-axis-power-feed-incremental-down-feed-in-mm-2-axis-dro-electromagetic-chuck-Serial-523-12F-R.jpg "12\" x 24\" Brown & Sharpe Dial-A-Size Model 1224 Surface Grinder with 3-axis Power Feed and Incremental Down Feed with Inch-Metric 2-axis DRO, Serial Number 523-1224-410, Inventory Reference G8025-6772 - Century Machinery")
![12" x 24" Brown & Sharpe Surface Grinder, Dial-A-Size, Model 1224, 3-axis Power Feed, Incremental Down Feed, in-mm, 2-axis DRO, Electro Magetic Chuck, Serial Number 523-1224-410 [G8025-6772]](https://centurymachinery.com/wp-content/uploads/2021/04/6772-3-brown-_-sharpe-surface-grinder-capacity-12-inch-x-24-inch-dial-a-size-model-1224-3-axis-power-feed-incremental-down-feed-in-mm-2-axis-dro-electromagetic-chuck-Serial-523-12L-R.jpg "12\" x 24\" Brown & Sharpe Dial-A-Size Model 1224 Surface Grinder with 3-axis Power Feed and Incremental Down Feed with Inch-Metric 2-axis DRO, Serial Number 523-1224-410, Inventory Reference G8025-6772 - Century Machinery")
![12" x 24" Brown & Sharpe Surface Grinder, Dial-A-Size, Model 1224, 3-axis Power Feed, Incremental Down Feed, in-mm, 2-axis DRO, Electro Magetic Chuck, Serial Number 523-1224-410 [G8025-6772]](https://centurymachinery.com/wp-content/uploads/2021/04/6772-4-brown-_-sharpe-surface-grinder-capacity-12-inch-x-24-inch-dial-a-size-model-1224-3-axis-power-feed-incremental-down-feed-in-mm-2-axis-dro-electromag-chuck-Serial-523L-side.jpg "12\" x 24\" Brown & Sharpe Dial-A-Size Model 1224 Surface Grinder with 3-axis Power Feed and Incremental Down Feed with Inch-Metric 2-axis DRO, Serial Number 523-1224-410, Inventory Reference G8025-6772 - Century Machinery")
![12" x 24" Brown & Sharpe Surface Grinder, Dial-A-Size, Model 1224, 3-axis Power Feed, Incremental Down Feed, in-mm, 2-axis DRO, Electro Magetic Chuck, Serial Number 523-1224-410 [G8025-6772]](https://centurymachinery.com/wp-content/uploads/2021/04/6772-5-brown-_-sharpe-surface-grinder-capacity-12-inch-x-24-inch-dial-a-size-model-1224-3-axis-power-feed-incremental-down-feed-in-mm-2-axis-dro-electromagetic-chuck-Serial-523-1ctls.jpg "12\" x 24\" Brown & Sharpe Dial-A-Size Model 1224 Surface Grinder with 3-axis Power Feed and Incremental Down Feed with Inch-Metric 2-axis DRO, Serial Number 523-1224-410, Inventory Reference G8025-6772 - Century Machinery")
![12" x 24" Brown & Sharpe Surface Grinder, Dial-A-Size, Model 1224, 3-axis Power Feed, Incremental Down Feed, in-mm, 2-axis DRO, Electro Magetic Chuck, Serial Number 523-1224-410 [G8025-6772]](https://centurymachinery.com/wp-content/uploads/2021/04/6772-6brown-_-sharpe-surface-grinder-capacity-12-inch-x-24-inch-dial-a-size-model-1224-3-axis-feed-incremental-down-in-mm-2-axis-dro_Serial-523-1224-410_TBL-_-CROSS-FD-CLT.jpg "12\" x 24\" Brown & Sharpe Dial-A-Size Model 1224 Surface Grinder with 3-axis Power Feed and Incremental Down Feed with Inch-Metric 2-axis DRO, Serial Number 523-1224-410, Inventory Reference G8025-6772 - Century Machinery")
![12" x 24" Brown & Sharpe Surface Grinder, Dial-A-Size, Model 1224, 3-axis Power Feed, Incremental Down Feed, in-mm, 2-axis DRO, Electro Magetic Chuck, Serial Number 523-1224-410 [G8025-6772]](https://centurymachinery.com/wp-content/uploads/2021/04/6772-7-brown-_-sharpe-surface-grinder-capacity-12-inch-x-24-inch-dial-a-size-model-1224-3-axis-power-feed-incremental-down-feed-in-mm-2-axis-dro-electromagetic-chuck-Serial-5Mag-Chk.jpg "12\" x 24\" Brown & Sharpe Dial-A-Size Model 1224 Surface Grinder with 3-axis Power Feed and Incremental Down Feed with Inch-Metric 2-axis DRO, Serial Number 523-1224-410, Inventory Reference G8025-6772 - Century Machinery")
![12" x 24" Brown & Sharpe Surface Grinder, Dial-A-Size, Model 1224, 3-axis Power Feed, Incremental Down Feed, in-mm, 2-axis DRO, Electro Magetic Chuck, Serial Number 523-1224-410 [G8025-6772]](https://centurymachinery.com/wp-content/uploads/2021/04/6772-8-brown-_-sharpe-surface-grinder-capacity-12-inch-x-24-inch-dial-a-size-model-1224-3-axis-power-feed-incremental-down-feed-in-mm-2-axis-dro-electromagetic-chuck-Serial-523-Rear.jpg "12\" x 24\" Brown & Sharpe Dial-A-Size Model 1224 Surface Grinder with 3-axis Power Feed and Incremental Down Feed with Inch-Metric 2-axis DRO, Serial Number 523-1224-410, Inventory Reference G8025-6772 - Century Machinery")
![Slipmaterial Naxos Rotary Surface Grinder, Horizontal Spindle, Model PMS-400, Magnetic Chuck16" Diameter, Swing inPan 24", Height Under Stone 10.5", Serial Number 2463 [G8080-7087] Site title Title Separator](https://centurymachinery.com/wp-content/uploads/2021/04/7087-1_slipmaterial-naxos-rotary-surface-grinder_mdl-PMS-400_elect-chk-16-in-dia_SP-24-in_vert-10.5-in_hyd-str_7.5-hp_Serial-2463-300x300.jpg "Slipmaterial Naxos PMS-400 Rotary Horizontal Spindle Surface Grinder -16\" Round Chuck - Swing in Pan 24\" - Height Under Stone 10.5\", Serial Number 2463, Inventory Reference G8080-7087 - Century Machinery")
![Sopko Internal Grinding Spindle, Type 401-253200, RPM 45,000, Length of Neck 5.250", V-ways width 4.75" x 6", Serial Number 119009 [G6526-6742]](https://centurymachinery.com/wp-content/uploads/2021/04/6742_sopko-internal-grinding-spdl_45K-rpm_length-of-neck-5.250-in_dimension-v-ways-width-4.75-in-x-6-in_type-401-253200_Serial-119009-300x300.jpg "Sopko Internal Grinding Spindle, Type 401-253200, RPM 45,000, Length of Neck 5.250\", V-ways width 4.75\" x 6\", Serial Number 119009 [G6526-6742] - Century Machinery")
![24" x 101" x 24" Mattison Surface Grinder, Actual 24" x 96", 3-axis Power Feed, Incremental Down Feed, Stone 20" Diameter x 6" Wide, Serial Number 20648 [G8025-9578]](https://centurymachinery.com/wp-content/uploads/2021/04/9578-2_mattison-surface-grinder-24x96_24-in-x-101-in-x-30-in_3-axis-PF_incrim-DF_stone-20-in-dia-x-6-in-w_30-hp_Serial-20648_L-S-F-300x300.jpg "24\" x 101\" x 24\" Mattison Surface Grinder Chuck Size 24\" x 96\" with 3-axis Power Feed Incremental Down Feed, Stone 20\" Diameter x 6\" Wide, Serial Number 20648, Inventory Reference G8025-9578 - Century Machinery")
