Description
COIL-MATIC AIR STOCK FEEDER and STRAIGHTENER
Model XHF-3012, Serial Number 888559
SPECIFICATIONS:
STOCK WIDTH, Maximum 30"
STROKE RANGE 0 thru 12"
STOCK THICKNESS 0.061"
STROKE Cycles per minute at maximum stroke 45
Pneumatic Driven Stock Gripper and One Holding
Gripper, each with 1⅛" diameter pads.
STRAIGHTENING PINCH ROLLS 5 (2 over 3)
Diameter each roll 2"
CONTROLS: Three position Switch.
Off Load / Pilot Pin / Run.
two Electric Current Limit Switches.
Foot Electric Trip Switch.
EQUIPPED WITH:
Stroke Length Adjustable via hand crank.
Manual Top Straightening Roll adjustment.
Stock Edge Guide.
Infeed Skate Conveyor 24" x 24"
Mounted on Portable Frame with Height Adjustment.
Inlet Air Filter and Oiler.
COMPLETE FACTORY SAFETY GUARDS
Dimensions 42½" LR x 52" FB x 57" Height
Height Floor to top of Infeed Conveyor 45"
![Coil Matic Air Stock Feeder and Straightener, Model XHF-3012, Capacity 30" Wide x 12" Stroke, Material Thick 0.061, Straightener Five 2 over 3 Rolls, Serial Number 976 [F0854-10257]](https://centurymachinery.com/wp-content/uploads/2021/04/10257-1coil-matic-air-stock-fder-straightenerXHF-3012cap-4-30-in-w-x-12-in-str-thick-0.061-fder-adj-top-rolls-2-over-3-Serial-976-End-view.jpg "10257-1,coil matic air stock fder-straightener,XHF-3012,cap 4, 30 in w x 12 in str, thick 0.061, fder adj top rolls 2 over 3, Serial 976, End view")
![Coil Matic Air Stock Feeder and Straightener, Model XHF-3012, Capacity 30" Wide x 12" Stroke, Material Thick 0.061, Straightener Five 2 over 3 Rolls, Serial Number 976 [F0854-10257]](https://centurymachinery.com/wp-content/uploads/2021/04/10257-2coil-matic-air-stock-fder-straightenerXHF-3012cap-4-30-in-w-x-12-in-str-thick-0.061-fder-adj-top-rolls-2-over-3-Serial-976-CU-Fd-End.jpg "10257-2,coil matic air stock fder-straightener,XHF-3012,cap 4, 30 in w x 12 in str, thick 0.061, fder adj top rolls 2 over 3, Serial 976, CU Fd End")
![Coil Matic Air Stock Feeder and Straightener, Model XHF-3012, Capacity 30" Wide x 12" Stroke, Material Thick 0.061, Straightener Five 2 over 3 Rolls, Serial Number 976 [F0854-10257]](https://centurymachinery.com/wp-content/uploads/2021/04/10257-3-coil-matic-air-stock-fder-straightenerXHF-3012cap-4-30-in-w-x-12-in-str-thick-0.061-fder-adj-top-rolls-2-over-3-Serial-976-Str-Clt-Pneu-Side.jpg "10257-3, coil matic air stock fder-straightener,XHF-3012,cap 4, 30 in w x 12 in str, thick 0.061, fder adj top rolls 2 over 3, Serial 976, Str Clt - Pneu Side")
![Coil Matic Air Stock Feeder and Straightener, Model XHF-3012, Capacity 30" Wide x 12" Stroke, Material Thick 0.061, Straightener Five 2 over 3 Rolls, Serial Number 976 [F0854-10257]](https://centurymachinery.com/wp-content/uploads/2021/04/10257-4-coil-matic-air-stock-fder-straightenerXHF-3012cap-4-30-in-w-x-12-in-str-thick-0.061-fder-adj-top-rolls-2-over-3-Serial-976-Straightener-End.jpg "10257-4, coil matic air stock fder-straightener,XHF-3012,cap 4, 30 in w x 12 in str, thick 0.061, fder adj top rolls 2 over 3, Serial 976, Straightener End")
![2.5" Width x 7 Rolls COOPERWEYMOUTH STOCK STRAIGHTENER & HEBBLE PUNCH PRESS FEEDER Serial Number Straightener 2567258 [F0854-4033]](https://centurymachinery.com/wp-content/uploads/2021/04/4033-1_cooperweymouth-stock-straightener-hebble-punch-press-feeder_material-2.5-in-wide_w-straightening-rolls_Serial-2567258-2099-300x222.jpg "2.5\" width x 7 Rolls COOPERWEYMOUTH STOCK STRAIGHTENER & HEBBLE PUNCH PRESS FEEDER Serial Number Straightener 2567258 [F0854-4033] - Century Machinery")
![5" width x .030" - 0.125" thickness Rowe Power Straightener and Feeder, Model S-15, capacity 5" width x .030" - 0.125" thickness, with 7 rolls, Serial Number 25445 [S7748-9485]](https://centurymachinery.com/wp-content/uploads/2021/04/9485-1-rowe-power-straightener-feederS-15_15-in-w-x-0.30-in-0.125-in-thickwith-7-rollsSerial-25445-Clt-side-view-300x300.jpg "Rowe Model S-15 Power Straightener and Feeder Capcity 5\" width x .030\" - 0.125\" thickness with 7 rolls, Serial Number 25445, Inventory Reference S7748-9485 - Century Machinery")
