shoda-3-axis-cnc-router-drill_NC-516P-1326_4-routers_4-drills-hds_2-pallet-changer_tbls-51-in.-x-79-in

Shoda 3-Axis CNC Pallet Changer Routers & Drill Model NC-516P-1326 Table 51 inch x 79 inch, 4- Routing Heads 12 kw each, 4- Drilling Heads2.2 kw each, Fanuc 11M Control Serial Number 853201, Inventory Reference R8950-106598

Model Number: NC-516-P-1326

Serial Number: 853201

Reference No: CNC Router & Drill & R8950-106598

Condition: used

Mfg Date:

Model Number NC-516-P-1326

Serial Number 853201

Reference Number CNC Router & Drill & R8950-106598

Read More
1-213-627-2847
Categories: , , Tags: , , , ,

Description

SHODA CNC PALLET CHANGER ROUTER & DRILL
      Model NC-516-P-1326,   Serial Number 853201

SPECIFICATIONS:                                            
3-AXES
TABLES: Two
       Table Dimensions each, 51" W x 79" L  (1,300mm x 2,100mm)  
       Type of Work Mounting Plate (Vacuum Chuck)
       Table Travel (Cross) X-Axis 62.99" (1,600mm)
       Independent Operation: One table in located with-in work area,
       while the other is located in material loading area.
DISTANCE BETWEEN UPRIGHTS  90" (2,286mm)
HEIGHT UNDER GANTRY CROSS RAIL 11" (279.4mm)
SPINDLES CARRIERS: 
        Four Routing and Four Piggyback Routing (Drilling)
       Transverse Travel (Y-Axis), 102.36" (2,600 mm) 
ROUTERS: (4) Four          
       12 KW, 3,000 thru 18,000 RPM
       Collet Type ER
       Vertical Travel (Z-Axis),  9.84" (250mm)
DRILLS: (4) Four
        2.2 KW, 3,000 thru 18,000 RPM
        Vertical Travel (Z-Axis),9.84" (250mm)
FEED RANGE     Infinitely Variable
CONTROL:  Fanuc 11MA CNC Microprocessor, 
        Remote Low Voltage Control.
        32 Bit Micro Processor.  
        9" (228.6mm)CRT.
        Inch/Meter Conversion.   
        Numeric Keyboard.
        Run Hour Display.
        Helical Interpolation.
        Full Cutter Compensation.
        RS 232 Interface.
        Background Edit Interpolation.
        E1A/ISO Recognition.
MOTOR DRIVES:  Wired 440 volts, 3 phase
        Routing Heads (each)  10 H.P. (12 KW) 220/440 volts
        Drill Heads (each) 1 H.P. 220/440 volt
        Feed Drives (All Axes) AC Servo's
        Vacuum Pumps (each) 10 H.P. 220/440 volts
EQUIPPED WITH:
        Safety Shield in front of and around Work Area and Material Loading & Offloading.
        Operators Control Station w/Start/Stop Buttons with Keyed Lockout.
        Spindle Lubrication System.
        (2) Shoda Vacuum Pumps w/ Integral Muffler & Baghouse.  
        (2) Hitachi Transistor Inverters 15 KVA each. 
COMPLETE FACTORY SAFETY GUARDS

Related products...