1.5 inch Leonard Bendmaster Model PBOT Tube & Pipe Bender 8 inch Maximum Radius with Mandrel Extractor, Pneumatic Driven, Serial Number 592, Inventory Reference B1804-9311

LEONARD BENDMASTER TUBE AND PIPE BENDER
   Model PBOT, Serial Number 592

SPECIFICATIONS
PNEUMATIC POWERED

CAPACITY BEND:
      Annealed Ferrous or Non-Ferrous Tubing 3/8″ to 1½” diameter
Wall Thickness  0.65″
      Bend Radius to Centerline, Angle Maximum 8″
      Centerline Height 2½”
      Tube length 114″
ARM ROTATION, Counterclockwise, and Horizontally thru 190° Arc
      Speed Control 2½ to 12 rpm.
      Return Stroke 25 rpm.
FOLLOWER and CLAMP DIE TOGGLE LEVERS: (Hand Operation)
MANDREL EXTRACTOR:  (Pneumatic)
      Mandrel Stroke 1″
      Rod Adjustment 2″
      Foot Pedal on pneumatic cylinder retraction.
AIR CONSUMPTION: Approximately 2 cfm. at 80 – 100 psi.
EQUIPPED WITH:
      Distance between Bend Turret Ten Positions (Degree of Bend Selector).
      Fast / Slow Control on Arm.
      (1) Radius Die: ½” dia.” x 1¾” Radius
      (1) Radius Die: ⅝” dia. X 4″ Radius Al.
      (1) Radius Die: 1″ dia.” x 3″ Radius ST850-BT-1000-3000
      (1) Radius Die: 1½” dia.” x 5″ Radius ST850-B-1-1500-5000
      (1)Four position Clamp Die ½”,¾”, 1″, 1½” by 1½” long
      Wiper Die: ½” OD, 1½-CLR”     Wiper Die ⅜” – 1 – CLR
      (1) Die Post 1″ dia.
      Bender mounted on wheels.
COMPLETE FACTORY SAFETY GUARDS