used Bridgeport Series 1 Vertical Milling Machine with Power Feed X-Y & Z Axis Table 9 inch x 42 inch and Variable Spindle Speed 60 thru 4200 rpm, 2 hp motor drive – Power Draw Bar – two Axis DRO, Serial Number Head J281128, Serial Knee BR2562259, Inventory Reference M2824-10591

used Bridgeport Series 1 Vertical Milling Machine with Power Feed X-Y & Z Axis Table, Inventory Reference M2824-10591

Model Number: Series 1

Serial Number: Serial Number Head J281128, Serial Knee BR2562259

Reference No: Vertical Milling Machine & M2824-10591

Condition: Used

Mfg Date:

Model Number Series 1

Serial Number Serial Number Head J281128, Serial Knee BR2562259

Reference Number Vertical Milling Machine & M2824-10591

Description

1– used  BRIDGEPORT VERTICAL MILLING MACHINE
 Series 1  Serial Number Milling Head J281128
                Serial Number Knee BR2562259
SPECIFICATIONS
SPINDLE:
Taper R-8
   Collet Capacity ¾" (19.05mm)
   Quill Travel 6" (152.4mm)
   Quill Feed (per spindle revolutions)  0.0015", 0.003", 0.006" IPM
         (0.0381, 0.0762, 0.124 mm.pm)
SPINDLE SPEEDS: Infinitely Variable thru 2-Speed Range  60-500 & 500-4200 rpm.
SPINDLE HEAD: Tilts Right/Left and Swivels Right/Left
EXTRA Height Under Spindle with 4" (1201.6 mm) Riser  25½"  (647.7mm)
OVERARM:  Moves In / Out 12” (305mm) and Rotates 360 degrees
TABLE: (3) T-Slots
   Size Overall, 9" x 42"  (228.6mm)
   Longitudinal Travel, (X-Axis) 30” Manually & Power Feed  26"  (660.4mm)
   Cross-Slide Travel, (Y-Axis) 12" (304,8mm)
   Vertical Travel Knee, (Z-Axis) 16" (406.4mm)
FEEDS: Table and Knee
   Spindle Vertical Manual and Power
   Table Longitudinal by Bridgeport Drive (X-Axis)  Manual and Power
   Table Cross Slide by Bridgeport Drive (Y-Axis) Manual and Power
   Knee Vertical Rise and Fall by Servo Drive (Z-Axis) Manual and Power
MOTOR DRIVES:
   Spindle 2 hp. 220/440volts
   Table Longitudinal & Cross Feeds each & Knee Vertical Feed 0.45 Amps
   Power Draw Bar
CONTROLS:  Control voltage 115 volts
   Remote Operator Control Station with High / Low & Off Buttons.
   Spindle Rotation Forward / Reverse Switch.
   Power Draw Bar with In / Out Buttons, & Pneumatic Lube
EQUIPPED WITH:
   Sony 2-Axis DRO Table Longitudinal & Cross Travel Table Carriage.
   (6) R-8 Collets.  (1) Collet Power Draw Bar.    Work Light.
COMPLETE FACTORY SAFETY GUARDS
Dimensions 60″ Depth x 60″ Width        (1524mm D Width x 83″ (2108.2mm) Height Approximate Weight 3400 lbs.