ACRA VERTICAL MILLING MACHINE
Model AM2FS Serial Number 04121
SPECIFICATIONS
SPINDLE:
Taper R-8
Collet Capacity ¾" (19.05mm)
Quill Travel 5" (127mm)
Quill Feed (Power per spindle revolutions)
0.003", .0015", .006" IPM
SPINDLE SPEEDS: 2-Speed Range
Low Rnge 60 thru 540 rpm
High Range 550 thru 4530 rpm
SPINDLE HEAD: Tilts Up/Down 45º and
Swivels Right/Left 90º
TABLE: (3) T-Slots
Size Overall, 9" W x 48" L(228.6 X 1,219.2mm)
Longitudinal Travel, (X-Axis) Manual 33″(838mm)
Power Feed 29.5″(7493mm)
Cross-Slide Travel,(Y-Axis) Manual & Power 16" (406mm)
Vertical Travel Knee, (Z-Axis) 18"(457.2mm)
FEEDS Table and Knee:
Longitudinal (Variable Feeds) Manual and Power
Knee Vertical Rise and Fall Manual
RAM:
Rotates 360 degrees
In/Out 22-3/16" (563.563mm)
MOTOR DRIVES: Motors wired 220 volts, 3 phase
Spindle 3 hp (2.2 kw) 220-440 volts
Table Feed Drive 2.2 Amps. 110 volts
CONTROLS
Power Feed Rate Control on each drive.
Spindle Speed Variable Control.
Spindle Feed Rate Shift Lever.
Down/Stop/Up Switch.
EQUIPPED WITH:
Newal Model C80 2-Axis DRO Cross Feed & Longitudinal Travel
(10) R8 Collets (Miscellaneous Sizes)
Work Light.
One Shot Lubrication.
COMPLETE FACTORY SAFETY GUARDS
Dimensions 63" (1600.mm) LR x 59" (1498.6mm) F-B x 83" (2108.2MMmm) Height
Approximate Weight 2200 lbs. (997 kg)
![Cincinnati Milicron 5-axis Hydrotel Profiler Miller, Model 20V-80, Spindle Speed 20-10,800 rpm, Table 30" x 80", 30 ATC, 20 hp, Serial Number 85-414Q-001-1 [M1748-16972]](https://centurymachinery.com/wp-content/uploads/2021/04/6972-2_cincinnati-milicron-5-axis-hydrotel-profiler-miller_20V-80_30-in-x-80-in_20-3600-rpm_50-NS_30-ATC_20-hp_Serial-85-414Q-001-1-300x300.jpg "Cincinnati Milicron 5-axis Hydrotel Profiler Miller, Model 20V-80, Spindle Speed 20-10,800 rpm, Table 30\" x 80\", 30 ATC, 20 hp, Serial Number 85-414Q-001-1 [M1748-16972] - Century Machinery")
![Lagun Vertical Milling Machine, Model FTV-2, Variable Spindle Speed 55 thru 4250 rpm, Power Feed 10" x 50" Table, Phase Converter, DRO, 2 hp, Serial Number SE-13759 [M2824-10517]](https://centurymachinery.com/wp-content/uploads/2021/04/10517-1-lagun-vertical-mill-FTV-2-power-feed-10-in-x-50-in-tbl-vari-speed-55-4250-rpm-2-hp-phase-converter-DRO-Serial-SE-1375-RS-F-300x300.jpg "Lagun FTV-2 Vertical Milling Machine with Power Feed 10 inch x 50 inch Table and 2 hp Variable Spindle Speed 55 thru 4250 rpm DRO and Single Phase Power Converter, Serial Number SE-13759, Inventory Reference M2824-10517 - Century Machinery")
![Bridgeport Vertical Milling Machine, Series 1, Power Feed Table 9" x 42", Variable Speed 60-4200 rpm, , Slot Attachment, 2 hp drive, Serial Number Head J262241, Serial Knee BR257265 [M2824-9329]](https://centurymachinery.com/wp-content/uploads/2021/04/9329-1_bridgeport-vert-mill_series-1_PF-tbl-9-in-x-48-in_VS-60-4200-rpm_2-hp_slott-att_Serial-Hd-J262241-288x300.jpg "Bridgeport Vertical Milling Machine, Series 1, Power Feed Table 9\" x 42\", Variable Speed 60-4200 rpm, , Slot Attachment, 2 hp drive, Serial Number Head J262241, Serial Knee BR257265 [M2824-9329] - Century Machinery")
