Description
CUSTOM MADE EXTRUSION STRETCH WRAP FORMING PRESS
Serial Number 788
SPECIFICATIONS
FORMING TONNAGE 18
DISTANCE BETWEEN JAWS:
Maximum Length of Part with Tension Cylinders fully retracted 218" (5537.2 mm)
Minimum Length of Part with Tension Cylinders fully extended 10" (254 mm)
TENSION CYLINDER STROKE each 24" (609.6 mm)
TENSION CYLINDER ROTATION +/- 90 Degrees
ARMS: SWING Simultaneous Arm Motion
Arm swings 10° Forward to 90°Back.
WRAPPING SPEED RANGE Adjustable
DIE LENGTH at full tonnage and 180° bend:
Minimum 20" (508 mm)
Maximum 72" (1828.8 mm)
DIE TABLE: (Pre drilled & threaded) 5/8" diameter holes
Working Surface, 87" W x 49" D (2209.8 x 1244.6mm)
Height Table To Floor 35" (899 mm)
MOTOR DRIVE: Wired 220 volts, 3 Phase
Hydraulic Pump 25 H.P. 220 volts
CONTROLS: Hand Push Buttons, with Start and Stop Buttons
EQUIPPED WITH:
1- set 4" (101.6mm)Jaws with Pneumatic Clamping.
2-Die Posts, 2-Hold-Down Clamps
COMPLETE FACTORY SAFETY GUARDS
Dimensions 90" (2,286mm) wide x 168" (4,267.2mm) Front to Back 50" (1,270mm) Ht
Dimensions with Arm Opened 171" (4,343.4 mm) width (Left to Right
Hydraulic 30" (762mm) wide x 60" (1,524mm) F-B x 44.5" (1,130.3mm) Ht.
Wt. 13,000 lbs
![18 tons, Custom Extrusion Stretch Wrap Forming Press Machine, Distance between 4" Jaws 128", Die length 40", Simultaneous Arm Move, Jaw Head swivels, Serial Number 788 [S8120-10218]](https://centurymachinery.com/wp-content/uploads/2021/04/10218-1-custom-stretch-wrap-forming-press-18-T-4-in-jaws-BJ-128-in-die-L-40-in-Simultaneous-Arm-Move-dead-swivel-RLSerial-788-F.jpg "18 tons, Custom Extrusion Stretch Wrap Forming Press Machine, Distance between 4\" Jaws 128\", Die length 40\", Simultaneous Arm Move, Jaw Head swivels, Serial Number 788 [S8120-10218] - Century Machinery")
![18 tons, Custom Extrusion Stretch Wrap Forming Press Machine, Distance between 4" Jaws 128", Die length 40", Simultaneous Arm Move, Jaw Head swivels, Serial Number 788 [S8120-10218]](https://centurymachinery.com/wp-content/uploads/2021/04/10218-2-custom-stretch-wrap-forming-press-18-T-4-in-jaws-BJ-128-in-die-L-40-in-Simultaneous-Arm-Move-dead-swivel-RLSerial-788-LSide.jpg "18 tons, Custom Extrusion Stretch Wrap Forming Press Machine, Distance between 4\" Jaws 128\", Die length 40\", Simultaneous Arm Move, Jaw Head swivels, Serial Number 788 [S8120-10218] - Century Machinery")
![18 tons, Custom Extrusion Stretch Wrap Forming Press Machine, Distance between 4" Jaws 128", Die length 40", Simultaneous Arm Move, Jaw Head swivels, Serial Number 788 [S8120-10218]](https://centurymachinery.com/wp-content/uploads/2021/04/10218-3-custom-stretch-wrap-forming-press18-T-4-in-jaws-BJ-128-in-die-L-40-in-Simultaneous-Arm-Move-dead-swivel-RLSerial-788-CU-Jaws-Tension-Cyl.jpg "18 tons, Custom Extrusion Stretch Wrap Forming Press Machine, Distance between 4\" Jaws 128\", Die length 40\", Simultaneous Arm Move, Jaw Head swivels, Serial Number 788 [S8120-10218] - Century Machinery")
![18 tons, Custom Extrusion Stretch Wrap Forming Press Machine, Distance between 4" Jaws 128", Die length 40", Simultaneous Arm Move, Jaw Head swivels, Serial Number 788 [S8120-10218]](https://centurymachinery.com/wp-content/uploads/2021/04/10218-4-custom-stretch-wrap-forming-press-18-T-4-in-jaws-BJ-128-in-die-L-40-in-Simultaneous-Arm-Move-dead-swivel-RLSerial-788-CU-Clt.jpg "18 tons, Custom Extrusion Stretch Wrap Forming Press Machine, Distance between 4\" Jaws 128\", Die length 40\", Simultaneous Arm Move, Jaw Head swivels, Serial Number 788 [S8120-10218] - Century Machinery")
![10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233]](https://centurymachinery.com/wp-content/uploads/2021/04/10233-3-Cyril-Bath-V10-Stretch-Former-Serial-101104-Nova-Changeover-F-RS-300x300.jpg "10 tons, Cyril Bath V10 CNC Extrusion Stretch Wrap Forming Press Machine, Distance between Jaws 113\", Jaws Rotate, Swing Right - Left - Tilt Up Down, Rise and Fall, each Arm is Independent Movement, with Nova Tooling Changeover Unit, Serial Number 101104, [S8120-10233] - Century Machinery")
![150 tons, Hufford A-46 Sheet Stretch Forming Press Machine, Sheet length 66 inch x 144", Depth 42", with 76" Jaws Articulating & Swinging left and right & Oscillate, Die length 190", Serial Number10 [S8120-10027]](https://centurymachinery.com/wp-content/uploads/2021/04/10027-1hufford-sheet-stretch-formermdl-46150-T76-in-W-jaws-articulate-sw-L-R-oscillatedie-L-for-180-deg-190-indie-ht-72-indepth-42-inSerial-10-300x300.jpg "150 tons, Hufford A-46 Sheet Stretch Forming Press Machine, Sheet length 66 inch x 144\", Depth 42\", with 76\" Jaws Articulating & Swinging left and right & Oscillate, Die length 190\", Serial Number 10 [S8120-10027] - Century Machinery")
![60 tons, Hufford A-12 Extrusion & Sheet Stretch Wrap Forming Press Machine, Distance between jaws Minimum 28", Maximum 264", Sheet Jaws 20 inch wide, Extrusion Gripper Jaws 6 inch, Tension Cylinder Stroke 30", Independent Arm Movement, Serial Number 40, [S8120-10342]](https://centurymachinery.com/wp-content/uploads/2021/04/10342-1-hufford-A-12-extrusion-_-sheet-stretch-wrap-former-60-T-BJ-28-inch-260-inch-20-inch-sheet-jaws-die-length-72-inch-Serial-40LS-F-300x300.jpg "Hufford A-12 Extrusion & Sheet Stretch Wrap Forming Press Machine - 60 tons - Distance between jaws Minimum 28\" - Maximum 264\" - Sheet Jaws 20\" wide and Extrusion Gripper Jaws 6 inch - Tension Cylinder Stroke 30\", Independent Arm Movement, Serial Number 40, Inventory Reference S8120-10342 - Century Machinery")
![20 Tons, Cyril Bath CNC Dual Parts Extrusion Stretch Wrap Forming Press Machine, model V-20, Distance between primary jaws 168", Distance between second jaws 92.5", Carriage travel 39", Serial M10307 [S8120-9476-1]](https://centurymachinery.com/wp-content/uploads/2021/04/9476-1_cyril-bath-cnc-dual-jaws_single-plain-stretch-wrap-forming-press_V-20_mfg-03_F-1-300x300.jpg "20 Tons, Cyril Bath CNC Dual Parts Extrusion Stretch Wrap Forming Press Machine, Model V-20, Distance between primary jaws 168\", Distance between second jaws 92.5\", Carriage travel 39\", Serial M10307 [S8120-9476-1] - Century Machinery")
