Description
CYRIL BATH ALSTOM CNC EXTRUSION STRETCH WRAP FORMING MACHINE
Model V-30-300, Serial Number M-7416, Date Manufactured 1998
SPECIFICATIONS
FORMING TONNAGE 30
DISTANCE BETWEEN JAWS:
Maximum Length of Part with Tension Cylinders fully retracted 300" (7620 mm)
Minimum Length of Part with Tension Cylinders fully extended 6" (152.4 mm)
TENSION CYLINDER ASSEMBLY:
Is mounted on Carriage with Cross Slide travel manually 12" (304.8mm)
Carriage travel thru motor to gear drive 117⅞" (2992.44mm)
TENSION CYLINDER STROKE (Adjustable) each 30" (762 mm)
TENSION CYLINDER SWING (Horizontal Elongation) +/- 30°
ARM SWING (each Arm has Independent Movement) 10° Forward to 100° Back.
JAW AXIAL ROTATION +/- 180 Degrees
WRAPPING SPEED RANGE Adjustable
Arm Speed Wrap 3 degrees / sec
Arm Speed Return 5 degree / sec
DIE LENGTH at full tonnage, 180 degrees Wrap adjustable: Minimum.16" (406.4 mm)
DIE TABLE: 70 Pre drilled & 5/8" threaded
Working Surface 50" FB x 84" LR (1270 mm x 2133.6 mm)
Height Table To Floor 36.5" (927.1 mm)
Distance between Table Top to Center of Die 10" (254 mm)
MOTOR DRIVE: Wired 460 volts, 3 Phase
Hydraulic Pump 100 H.P. 230/460 volts
two Tension Cylinder Carriages screw drives each 2 H.P. 230/460 volts
Oil Cooler Fan 3/4 H.P. 230/460 volts
MAIN CONTROLS STATION: CNC Controls with:
Programmable Key Pad, CRT,
Hand Function Buttons,
Internal Hard Drive and spare Hard Drive.
REMOTE HAND CONTROLS:
2-Swing Away Control Station each side of table and located on
each arm Jaw Helper Controls
ALL Control Stations with Emergency Stop Buttons
EQUIPPED WITH:
1-set of JAW HOLDERS Capacity 6” Jaws with Pneumatic
Clamping. Jaw Block can rotate and swings Left/Right or tilts Up/ Down
2-set Adjustable Die Posts.
Heat Exchanger.
COMPLETE FACTORY SAFETY GUARDS
Dimensions Former 308" FB x 448" LR
Approximate weight 31,000 lbs.
![30 tons, Cyril Bath-Alstom V-30-300 CNC Extrusion and Sheet Stretch Wrap Forming Press Machine, Distance between 6" Jaws 300", Tension Cylinder Stroke 30", Independent Arms Movement, Serial Number M-7416, [S8120-10287]](https://centurymachinery.com/wp-content/uploads/2021/04/10287-1-cyril-bath-alstom-CNC-stretch-wrap-former-V30-300-30-T4x5-in-jawsBJ-300-in-Str-30-inindepend-arms-Mfg-98-Serial-M-7416-L-F.jpg "30 tons, Cyril Bath-Alstom V-30-300 CNC Extrusion and Sheet Stretch Wrap Forming Press Machine, Distance between 6\" Jaws 300\", Tension Cylinder Stroke 30\", Independent Arms Movement, Serial Number M-7416, [S8120-10287] - Century Machinery")
![30 tons, Cyril Bath-Alstom V-30-300 CNC Extrusion and Sheet Stretch Wrap Forming Press Machine, Distance between 6" Jaws 300", Tension Cylinder Stroke 30", Independent Arms Movement, Serial Number M-7416, [S8120-10287]](https://centurymachinery.com/wp-content/uploads/2021/04/10287-2-cyril-bath-alstom-CNC-stretch-wrap-former-V30-300-30-T4x5-in-jawsBJ-300-in-Str-30-inindepend-arms-Mfg-98-Serial-M-7416-Main-Op-Clt-Station.jpg "30 tons, Cyril Bath-Alstom V-30-300 CNC Extrusion and Sheet Stretch Wrap Forming Press Machine, Distance between 6\" Jaws 300\", Tension Cylinder Stroke 30\", Independent Arms Movement, Serial Number M-7416, [S8120-10287] - Century Machinery")
![30 tons, Cyril Bath-Alstom V-30-300 CNC Extrusion and Sheet Stretch Wrap Forming Press Machine, Distance between 6" Jaws 300", Tension Cylinder Stroke 30", Independent Arms Movement, Serial Number M-7416, [S8120-10287]](https://centurymachinery.com/wp-content/uploads/2021/04/10287-3-cyril-bath-alstom-CNC-stretch-wrap-former-V30-300-30-T4x5-in-jawsBJ-300-in-Str-30-inindepend-arms-Mfg-98-Serial-M-7416LS-F.jpg "30 tons, Cyril Bath-Alstom V-30-300 CNC Extrusion and Sheet Stretch Wrap Forming Press Machine, Distance between 6\" Jaws 300\", Tension Cylinder Stroke 30\", Independent Arms Movement, Serial Number M-7416, [S8120-10287] - Century Machinery")
![30 tons, Cyril Bath-Alstom V-30-300 CNC Extrusion and Sheet Stretch Wrap Forming Press Machine, Distance between 6" Jaws 300", Tension Cylinder Stroke 30", Independent Arms Movement, Serial Number M-7416, [S8120-10287]](https://centurymachinery.com/wp-content/uploads/2021/04/10287-4-cyril-bath-alstom-CNC-stretch-wrap-former-V30-300-30-T4x5-in-jawsBJ-300-in-Str-30-inindepend-arms-Mfg-98-Serial-M-7416-F-RS.jpg "30 tons, Cyril Bath-Alstom V-30-300 CNC Extrusion and Sheet Stretch Wrap Forming Press Machine, Distance between 6\" Jaws 300\", Tension Cylinder Stroke 30\", Independent Arms Movement, Serial Number M-7416, [S8120-10287] - Century Machinery")
![30 tons, Cyril Bath-Alstom V-30-300 CNC Extrusion and Sheet Stretch Wrap Forming Press Machine, Distance between 6" Jaws 300", Tension Cylinder Stroke 30", Independent Arms Movement, Serial Number M-7416, [S8120-10287]](https://centurymachinery.com/wp-content/uploads/2021/04/10287-5-cyril-bath-alstom-CNC-stretch-wrap-former-V30-300-30-T-4x5-in-jawsBJ-300-in-Str-30-inindepend-arms-Mfg-98-Serial-M-7416-Reararm-partial-out.jpg "30 tons, Cyril Bath-Alstom V-30-300 CNC Extrusion and Sheet Stretch Wrap Forming Press Machine, Distance between 6\" Jaws 300\", Tension Cylinder Stroke 30\", Independent Arms Movement, Serial Number M-7416, [S8120-10287] - Century Machinery")
![30 tons, Cyril Bath-Alstom V-30-300 CNC Extrusion and Sheet Stretch Wrap Forming Press Machine, Distance between 6" Jaws 300", Tension Cylinder Stroke 30", Independent Arms Movement, Serial Number M-7416, [S8120-10287]](https://centurymachinery.com/wp-content/uploads/2021/04/10287-6-cyril-bath-alstom-CNC-stretch-wrap-former-V30-300-30-T-4x5-in-jawsBJ-300-in-Str-30-inindepend-arms-Mfg-98-Serial-M-7416-Hyd-Oil-Heat-Exchanger.jpg "30 tons, Cyril Bath-Alstom V-30-300 CNC Extrusion and Sheet Stretch Wrap Forming Press Machine, Distance between 6\" Jaws 300\", Tension Cylinder Stroke 30\", Independent Arms Movement, Serial Number M-7416, [S8120-10287] - Century Machinery")
![Hufford A-10 Stretch Wrap Forming Press, Distance between 4" jaws 219", 17.5 tons, Tension Cylinder Stroke18½", Simultaneous Arms Movement, ID H081 [S8120-10025]](https://centurymachinery.com/wp-content/uploads/2021/04/10025-1-hufford-stretch-wrap-forming-press-A-10-17.5-T-4-in-jaws-BJ-219-intension-cyl-str-18.5in-Simultaneous-Arms-Serial-H081-LS-F-300x300.jpg "Hufford A-10 Stretch Wrap Forming Press Distance between 4\" jaws 219\" - 17.5 tons - Tension Cylinder Stroke18½\", Simultaneous Arms Movement, ID H081, Inventory reference S8120-10025 - Century Machinery")
![11 tons, NAS Plant Division Extrusion Stretch Wrap Forming Press, Distance between 3" Gripper Jaws 136", Tension Cylinder Stroke 13", Simultaneous Arms Movement, Serial Number NAS3-19805 [S8120-10423]](https://centurymachinery.com/wp-content/uploads/2021/04/10423-1-NAS-plant-division-stretch-wrap-forming-press-11-tons-3-inch-jawsbetween-jaws-136-inch-tension-str-10-inch-NAS-3-19805Rside-F-300x300.jpg "11 tons NAS Plant Division Extrusion Stretch Wrap Forming Press Distance between 3\" Gripper Jaws 136\" Tension Cylinder stroke 13\" Simultaneous Arms Movement, Serial number NAS3-19805, Inventory referenceS8120-10423 - Century Machinery")
![20 tons, Hufford L&F, A-7 Extrusion Stretch Wrap Forming Press Machine, Distance between 6 inch gripper jaws 202 inch, with Bulldozer die clamp, Serial Number 80508 [S8120-10201-519]](https://centurymachinery.com/wp-content/uploads/2021/04/10201-1-Hufford-A7-20-T-202-in-BJ-Front-Serial-Number-80508-1-300x300.jpg "20 tons Hufford L&F A-7 Extrusion Stretch Wrap Forming Press Machine Distance between 6\" Gripper Jaws 202\" with Bulldozer Die Clamp, Serial Number 80508, Inventory Reference S8120-10201-519 - Century Machinery")
