Description
PRATT & WHITNEY VERTICAL SLOTTER (SHAPER)
Model B, Serial Number 963
SPECIFICATIONS
STROKE OF RAM 0 thru 6" (0 thru 152.4mm)
RAM ADJUSTMENT:
Angular, forward at bottom 0 to 5 degrees
Vertical 10" (254mm)
RAM SPEED: Cutting strokes per minute 33, 49, 76, 116.
COLUMN FACE TO TOOL POST SEAT 18¾" (44,45mm)
TOOL POST takes tool ¾" by 1½" (19.05 by 38.1mm)
TABLE TOP TO END OF RAM:
Maximum (longest stroke) 15" (381mm)
Maximum (no stroke) 11¾" (298.45mm)
TABLE TOP TO LOWER END OF RAM BEARING 10" (254mm)
TABLE TRAVEL: Hand, Power and Rapid Traverse
Longitudinal, Maximum 25" (635mm)
Transverse 20" (508mm)
FEEDS:
Longitudinal and Transverse 0.0027" to 0.0243"
Power Feed (on 10" Radius) 0.009" to 0.085"
ROTARY TABLE:
Diameter 19¾" (501.65mm)
T-Slots: (3) parallel and (1) at right angle
Hand and Power Rotation (Indexing)
MOTOR DRIVES: wired 440 volts, 3 phase
Main 3 H.P (3.7kw). 220/440 volts.
EQUIPPED WITH:
Motors Start/Stop Buttons.
Tool Holders.
COMPLETE FACTORY SAFETY GUARDS
Dimensions 55” x 75” x 84” Height
(1,397mm x 2,1336mm x 2,133.6mm Ht.)
Approximate weight 4,600 lbs.
![Oliver Vertical Shaper, Model 287-T, Cutting Speed 7,200 rpm, Table 48" x 96", Collet type Cutter Holder, Drive 7½ hp, Serial Number 82050, Condition Rebuilt [S3053-6722]](https://centurymachinery.com/wp-content/uploads/2021/04/6722-oliver-vertical-shaper-287-T-rebuilt-for-boeing-commercial-aviation-300x300.jpg "Oliver 287-T Vertical Spindle Shaper - Cutting Speed 7200 rpm - Table 48\" x 96\" - Collet type Cutter Holder - Drive 7½ hp - Condition Rebuilt, Serial Number 82050, Inventory Reference S3053-6722 - Century Machinery")
