Description
OLIVER VERTICAL SHAPER, ROUTER
Model 288-T, Serial Number 64192
SPECIFICATIONS
CAPACITY:
SPINDLES two
Each Diameter 1¼"
Vertical Adjustment each 4½"
By Hand Crank
SPINDLE SPEED:
Speed Ranges 7,200
TABLE SIZE: LR x FB 36" x 65½"
MOTOR Wired 220 volts, 3 phase
Two Drive 5 hp. 3470 RPM
CONTROLS:
Remote On/Off Buttons for each Spindle Drive Motors
EQUIPPED WITH:
two New 1¼" diameter Spindle and spacers.
COMPLETE FACTORY SAFETY GUARDS
PLEASE NOTE:
We started the rebuilding process for a customer who passed away.
We made up two 1¼" diameter spindles as noted above, the spindles housings were both taken apart as part of our rebuilding process.
We do not have the time to complete this project and have discounted the price far below our actual cost, and below our cost to make up two new spindles.
Therefore we are selling this shaper in an AS IS CONDITION, with-out any warrantee of workability. We will take photos of current condition and all parts.
We welcome you visit to view this Vertical Shaper at our location.
![Oliver Vertical Shaper, Model 287-T, Cutting Speed 7,200 rpm, Table 48" x 96", Collet type Cutter Holder, Drive 7½ hp, Serial Number 82050, Condition Rebuilt [S3053-6722]](https://centurymachinery.com/wp-content/uploads/2021/04/6722-oliver-vertical-shaper-287-T-rebuilt-for-boeing-commercial-aviation-300x300.jpg "Oliver Vertical Shaper, Model 287-T, Cutting Speed 7,200 rpm, Table 48\" x 96\", Collet type Cutter Holder, Drive 7½ hp, Serial Number 82050, Condition Rebuilt [S3053-6722] - Century Machinery")
