Description
CINCINNATI 5-AXES VERTICAL CNC HONEYCOMB PROFILER MILLER
Model 20V, Bed Type, Serial Number 87-416Q779-2
SPECIFICATIONS:
SPINDLE: Number of Spindles (One)
Collet Double Taper Type
Speeds Infinitely Variable 7,200 thru 24,000 RPM
Vertical Travel on slide (Z-Axis) 24"
SPINDLE HEAD: Rotates (B-Axis) Tilt –110 Degrees to 10 degrees
C-Axis) Twist +/- 190 degrees
SPINDLE CARRIER: Auto Tilt Type
SPINDLE COOLING: Glycol with Chiller
WORK HEIGHT – Spindle to Table Top:
Spindle Pivot Point to Spindle Nose 7.5"
Spindle Pivot Point to Work Surface 5.75" Minimum, 29.75" Maximum
TABLE: T-Slotted, (2) Table Outboard Supports
Mounting Surface 40" W x 120" L
Longitudinal Travel (X-Axis) 120"
Transverse Travel (Y-Axis) 42"
FEEDRATES: Infinitely Variable,
X-Axis (Longitudinal) Y-Axis (Transverse) and Z-Axis (Vertical Spindle):
B and C Axis 4 to 400 ipm Manual, NC Control 1 to 400 ipm
Rapid Traverse, X, Y, Z-Axes 12 to 1200 ipm Manual, NC Control 0.10 to 1200 ipm
MOTOR DRIVES: Wired 460 volts, 3-phase
Spindle 10 H.P. 230/460 volts
Feed Drives (All Axis) Servo Motors
CONTROLS: Remote Low Voltage Control
Acramatic CNC CIP0/220B Mini computer
(Circular Interpolation In/Millimeters XYZ Coordinates). Circular path XY plane.
XZ plain, or YZ plane). (Helical Interpolation 3-dimensional
Circular Interpolation). (Helical arcs interpolated along a cylinder parallel to any one of the
3-linear axes). Linear Interpolation In/Metric, CONTROL STATES total of (6) operational
conditions RS232 PORT. (1) Additional Computer has been added to download larger
files and add to storage capacity.
EQUIPPED WITH: PENDENT CONTROL w/ Function Lock,. Master Start/Stop. Emergency
Stop. Console Remote. Select Axis. Feed increments feed rate. Override. CNC on. Grid
align. X&Y axis interchange. Tool change reset. Cycle stop. Feed hold. Power feed. Zero
shift. On, Override. Start/Stop Buttons. Load Meter. Speed dial,
RPM Meter. Mist Lube Control. Dust Collector Control CW/CCW Buttons, Direction
CCW/CW, Start/Stop, CNC-PC Control Panel. Keyboard and CRT. (1) Spindle Cooling
Unit. Spindle Lubrication System. (1) Dust Collection Unit
(1) TORIT 19 CYCLONE DUST COLLECTOR Ser 225757, TORIT DOWN FLOW
BAGGER. (2) OUTRIGGER TABLE SUPPORTS. (3) SPINDLE COLLETS
COMPLETE FACTORY SAFETY GUARDS
Original was used to profile Composite and Aluminum Honeycomb
