Description
FOSDICK FOSMATIC RADIAL DRILL
Serial Number 10926
SPECIFICATIONS
ARM LENGTH 6'
COLUMN DIAMETER 15"
SPINDLE TAPER 6 MT
SPINDLE SPEEDS:
20, 22, 24, 27, 33, 37,41, 45, 54, 59, 67,
74, 94, 98, 103, 115, 140, 156, 174, 193,
229, 255, 283, 315, 375, 416, 463, 515,
628, 700, 776, 865, 1034, 1138, 1264,
1406 rpm.
SPINDLE QUILL TRAVEL: Up/Down 22"
Manual and Power
SPINDLE QUILL FEED:
THREAD: 14 Thd., 11½ Thd., 8 Thd.
FEEDS: .003, .004, .005, .006, .007, .010,
.013, .016, .021, .023, .042, .052, .074 imp.
HEIGHT UNDER SPINDLE:
Spindle Quill Up and Arm Up: Maximum 70"
Spindle Quill Up and Arm Down: 24"
BED: 4T-Slots
Working Surface, 40" W x 77" L
MOTOR DRIVES: Wired 440 volts, 3-phase
Spindle 10 H.P. 220/440 volts
Coolant Pump, Gusher ¼ H.P., 220/440 volts
CONTROLS:
Main Motor On/Off Buttons.
EQUIPPED WITH:
Power Clamping on Column, Arm and Head.
Power Elevation on Arm.
Rapid Traverse on Head. Coolant Pump.
COMPLETE FACTORY SAFETY GUARDS
Dimensions: 45″ FB x 142″ LR x 126″ Height
Approximate Weight 17000 lbs.
![4' x 11" Column, Carlton Radial Arm Drill, Size1A, Spindle Speeds 30 - 1500 rpm, Spindle Travel 12", Spindle Taper 4-mt, Height Under Column 53.5", Power Elevation & Column, SerialA1157 [D5700-9097]](https://centurymachinery.com/wp-content/uploads/2021/04/9097-1_carlton-radial-arm-drill_4-ft-arm-x-11-in-col_1A_30-1500-rpm_ST-12-in_4mt_-ht-53.5-in_pwr-elev-clamp_-L-base_Serial-1A1157-300x300.jpg "4' arm x 11\" column, Carlton Radial Arm Drill, Size1A, Spindle Speeds 30 - 1500 rpm, Spindle Travel 12\", Spindle Taper 4-mt, Height Under Column 53.5\", Power Elevation & Column, SerialA1157 [D5700-9097] - Century Machinery")
![3' arm x 9" column, Gidding & Lewis Chipmaster Radial Arm Drill, Model 2R, Spindle Speeds 75 - 1500 rpm, Spindle Quill Travel 9", 4mt, Height under column 54", Power Elevation, Tapping Feeds, Box Table & 8" Mill Vise, Serial Number 951-00129, [D5700-17012]](https://centurymachinery.com/wp-content/uploads/2021/04/7012-1_gidding-_-lewis-chipmaster-radial-arm-drill_3-ft-arm-x-9-in-col_75-1500-rpm_4-mt_US-54-in_quill-trav-9-in_pwr-elev_Serial-951-00129-63_L-R-300x300.jpg "3' arm x 9\" column, Gidding & Lewis Chipmaster Radial Arm Drill, Model 2R, Spindle Speeds 75 - 1500 rpm, Spindle Quill Travel 9\", 4mt, Height under column 54\", Power Elevation, Tapping Feeds, Box Table & 8\" Mill Vise, Serial Number 951-00129, [D5700-17012] - Century Machinery")
![6' arm x 17" column, American Hole Wizard Radial Arm Drill, Spindle Speeds 28 - 1600 rpm, Spindle Stroke 18.250", Height Under Column 70", 15 hp, Serial Number 75689 [D5700-19451]](https://centurymachinery.com/wp-content/uploads/2021/04/94511-1-american-radial-arm-drill-6-ft-arm-x-17-in-col-hole-wizard-28-1600-rpm-HUS-70-in-15-hp-Serial-75689-L-F-214x300.jpg "6' arm x 17\" column, American Hole Wizard Radial Arm Drill, Spindle Speeds 28 - 1600 rpm, Spindle Stroke 18.250\", Height Under Column 70\", 15 hp, Serial Number 75689 [D5700-94511] - Century Machinery")
