Best Table Surface Grinder - Sharp 8 inch x 20 inch Reciprocating Table Surface Grinder
Sharp-6-inch-x-18-inch-Surface-Grinder-Model-SG618-2A-Table-Longitudinal-Feed-Hand-and-Hydraulic-Serial-92BX233-Mfg-2003-inventory-reference-10601-2-RS-F
Sharp-6-inch-x-18-inch-Surface-Grinder-Model-SG618-2A-Table-Longitudinal-Feed-Hand-and-Hydraulic-Serial-92BX233-Mfg-2003-inventory-reference-10601-5-ls
Sharp-6-inch-x-18-inch-Surface-Grinder-Model-SG618-2A-Table-Longitudinal-Feed-Hand-and-Hydraulic-Serial-92BX233-Mfg-2003-inventory-reference-10601-3-RS
Sharp-6-inch-x-18-inch-Surface-Grinder-Model-SG618-2A-Table-Longitudinal-Feed-Hand-and-Hydraulic-Serial-92BX233-Mfg-2003-inventory-reference-10601- 4-rear
Sharp-6-inch-x-18-inch-Surface-Grinder-Model-SG618-2A-Table-Longitudinal-Feed-Hand-and-Hydraulic-Serial-92BX233-Mfg-2003-inventory-reference-10601-6-Down Chuck
Sharp-6-inch-x-18-inch-Surface-Grinder-Model-SG618-2A-Table-Longitudinal-Feed-Hand-and-Hydraulic-Serial-92BX233-Mfg-2003-inventory-reference-10601-7-down-ls-f

Sharp 8 inch x 20 inch Reciprocating Table Surface Grinder Model SG618-2A Equipped with Manual & Power Longitudinal Travel Drive Permanent Magnetic Chuck 1.5hp Stone Drive and Coolant System, Serial Number 92B233, Date Mfg’d 2003, Inventory Reference G8025-10601

Model Number: SG618-2A

Serial Number: 92B233

Reference No: Surface Grinder, Reciprocating Table & G8025-10601

Condition: used, Run Great & Price to Sell

Mfg Date:

Model Number SG618-2A

Serial Number 92B233

Reference Number Surface Grinder, Reciprocating Table & G8025-10601

Read More
1-213-627-2847
Categories: , Tag:

Description

Sharp 8 inch x 20 inch Reciprocating Table Surface Grinder

Model SG618-2A Serial Number 92B233   Mfg,d 2003 

SPECIFICATIONS
CHUCK: Permanent Magnetic
   Size 6" x 18" x 2¾" Ht.(152.4 x 457.2mm x 69.85mm)
CAPACITY
   Maximum Grinding Length 18½" (469.9mm)
   Maximum Grinding Width 6.3" (160.02mm)
   Maximum distance from Spindle Center to Table Surface 16" (406.4mm)
TABLE: (1) T-Slot width 0.669" (177mm)
   Working Surface Pad length 9½" (749.3mm)
   Longitudinal Movement of Table Infinitely Variable thru
        18.9"  (480.06mm)
SADDLE: Transverse (Cross) Movement 7" (177.8)
FEEDS:
   Longitudinal movement by: Hydraulic (Automatic)  9.8 - 65 FPM (3 -20min)
   Longitudinal movement per Revolution by: Hand 4.5" (105mm)
   Cross (Transverse) movement of Saddle by Hand feed per
       Revolution 0.2"/rev (3.2m/min)    Graduation of handwheel  0.006 (0.02mm) 
   Rapid Feed 47" (1200mm/min)   Step Feed 0.006" – 0.4" / pass (0.15 – 10mm/pass)
 Vertical movement of Wheel Head  feed per revolution 0.5"/rev (1mm/rev)
      Graduation of handwheel 0.0002" (0.005mm)
GRINDING WHEEL: standard, 7.1" (180.34mm)
GRINDING WHEEL ASSEMBLY: Movement by Hand
MOTOR DRIVES: Machine Wired 220 volts
   Spindle 1½ hp (1.1 kw) 220/440 volts
   Hydraulic Pump 1 hp (0.7 4 kw) 220/440 volts
   Coolant Pump ¼ H.P. 220/440 volts
CONTROLS: Main Power On. Spindle Start / Stop Buttons.
   Hydraulic Pump Start / Stop Buttons.
   Emergency Stop Button.  Coolant On / Off Switch.
   Cross Feed Rapid Inward / Outward Buttons.
   Mode Selection R: Traverse Grinding  L: Plunge Grinding
EQUIPPED WITH: 
   1- Grinding Wheel Hubs.  1- Diamond Grinding Wheel.
   1- Stone Dresser with Diamond Nib.
    Lubricator.  Coolant Pump. Splash Guards
COMPLETE FACTORY SAFETY GUARDS

Floor Space 65¾" LR x 58" F-B  x 72" Ht.
     (2,146.3 R-L x 1,473.2 F-B x 1,828.8mm Ht.
Approximate weight 2,000 lbs.

Please feel free to contact us for more info.

Related products...