WOODWORKING EQUIPMENT

Link back to Front Page:
www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, CATEGORIES ARE IN ALPHABETICAL ORDER.

*SANDERS, EDGE: "New"*
*
SANDERS, BELT: All Kinds*
*SANDERS, BELT: "New"*
*SANDERS, WIDE BELT: "New"*
*SANDER: Combined with LATHE, ETC*
*
SANDERS, DISC, Mfg. by Max, Oliver, etc
*
*
SANDER, DISC: "New" Mfg. by Max*
*
SANDERS, DISC & SPINDLE, Combination, Mfg. by Max*
*
SANDERS, MULTIPLE DRUMS*
*SANDERS, SPINDLE*
*SANDERS, SPINDLE: "New"*
*SAWS, BAND: VERTICAL*
*
SAWS, BAND, VERTICAL: "New"
Mfg. Powermatic & Tannewitz*
*SAW, CHOP: Single & Double Miter*
*SAWS, PANEL: CNC*
*SAWS, RADIAL ARM*
*SAWS, Scroll (JIG)*
*SAWS, Scroll (JIG): "New"*
*SAWS, TABLE*
*SAWS, TABLE: "New"*
*SHAPERS, Vertical Spindle*
*SHAPERS, Vertical & Tilting Spindle
Mfg. by Oliver, Onsrud & Orton*


Serving Industry for 83 years

If you require a Quote Sheet PLEASE  send  us your requirements:

CENTURY logo
1937 South Santa Fe Avenue
Los Angeles, California 90021

 
Email: sales@centurymachinery.com
Website: www.centurymachinery.com
Telephone 1-213-627-2847

Fax 1-213-627-2499


 

SANDERS, BELT: All Kind 


"NEW" 2" wide BURR KING BELT SANDER, Model 760
Capacity, Belt width 2",  Motor drive1 hp
Inventory Reference  S0403-

 

BELT DIRECTION VERTICAL  WET TYPE
  
                                                                  
 AEM (Now Timesaver) RECIPROCATING BED ABRASIVE BELT GRINDER
Wide Belt,   
EXTRA HEAVY DUTY      WET TYPE
Model 75-25          Date Mfg. 3-15-90
27" wide Sanding Belt

Reciprocating Bed, overall size  26" F-B x 28" L-R
Part Fixture Table 25" x 25" with 3 point clamping.
Belt Motor Drive 75 hp.
Automatic Reciprocating Bed movement, Longitudinally and Up Feed.
Coolant Tank and Pump.
Equipped with: Bed Positioning DRO.     Manual and Automatic Operation.
     Automatic Feed Cycle.    Fixture Clamping.   Operator Control Station.
     Drive Motor per cent load meter.    Coolant Pump and Tank.
THIS UNIT HAS Steel Contact Drum 9Ύ" diameter and
  1- additional spare "New" Rubber Coated Contact Drum.
   Spare "New " Pillar Bearing Blocks for contact drum.
Inventory Reference G3975-9651  
vertical abrasive belt sander-grinder, aem wet reciprocating bed abrasive belt grinder, single belts 27 inch wide, model 75-25, belt, reciprocating bed overall size 26 inch F-B x 28 inch L-R, moving bed linear movement - stroke 43 inch, vertical bed adjustment 8 inch, work area opening between coolant drum and bed 6 inch thru 14 inch, digital readout on bed elevation, with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table, abrasive belt drive 75 hp, Mfg 1990, Serial Number 1351-2664   vertical abrasive belt sander - grinder, aem wet reciprocating bed abrasive belt grinder, single belts 27 inch wide, model 75-25, belt, reciprocating bed overall size 26 inch F-B x 28 inch L-R, moving bed linear movement - stroke 43 inch, vertical bed adjustment 8 inch, work area opening between coolant drum and bed 6 inch thru 14 inch, digital readout on bed elevation, with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table, abrasive belt drive 75 hp, Mfg 1990, Serial Number 1351-2664, Photo outfeed Photo Out feed view.
 vertical abrasive belt sander - grinder, aem wet reciprocating bed abrasive belt grinder, single belts 27 inch wide, model 75-25, belt, reciprocating bed overall size 26 inch F-B x 28 inch L-R, moving bed linear movement - stroke 43 inch, vertical bed adjustment 8 inch, work area opening between coolant drum and bed 6 inch thru 14 inch, digital readout on bed elevation, with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table, abrasive belt drive 75 hp, Mfg 1990, Serial Number 1351-2664, Photo Infeed view
Photo Infeed view.     vertical abrasive belt sander - grinder, aem wet reciprocating bed abrasive belt grinder, single belts 27 inch wide, model 75-25, belt, reciprocating bed overall size 26 inch F-B x 28 inch L-R, moving bed linear movement - stroke 43 inch, vertical bed adjustment 8 inch, work area opening between coolant drum and bed 6 inch thru 14 inch, digital readout on bed elevation, with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table, abrasive belt drive 75 hp, Mfg 1990, Serial Number 1351-2664, Reciprocating Bed and Fixture Table Infeed view Photo Reciprocating Bed and Fixture Table In-feed view.
 vertical abrasive belt sander - grinder, aem wet reciprocating bed abrasive belt grinder, single belts 27 inch wide, model 75-25, belt, reciprocating bed overall size 26 inch F-B x 28 inch L-R, moving bed linear movement - stroke 43 inch, vertical bed adjustment 8 inch, work area opening between coolant drum and bed 6 inch thru 14 inch, digital readout on bed elevation, with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table, abrasive belt drive 75 hp, Mfg 1990, Serial Number 1351-2664, Reciprocating Bed and Fixture Table Out feed view
Photo Reciprocating Bed and Fixture Table Out-feed view.
 vertical abrasive belt sander - grinder, aem wet reciprocating bed abrasive belt grinder, single belts 27 inch wide, model 75-25, belt, reciprocating bed overall size 26 inch F-B x 28 inch L-R, moving bed linear movement - stroke 43 inch, vertical bed adjustment 8 inch, work area opening between coolant drum and bed 6 inch thru 14 inch, digital readout on bed elevation, with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table, abrasive belt drive 75 hp, Mfg 1990, Serial Number 1351-2664, Close up Operator Control Station
Photo Close-up Operator Control Station.
 WE NEED SPACE and we have discounted our price to $10,500.00




BELT DIRECTION VERTICAL  DRY TYPE
                                                                                    

36" BURLINGTON Rand Bright RECIPROCATING BED ABRASIVE BELT GRINDER
Wide Belt,   Heavy Duty
Model S36X75R          Date Mfg. 11-1998
36" wide Sanding Belt

Reciprocating Bed overall size 24" x 45"
Belt Motor Drive 30 hp.
Equipped with: Manual and Automatic Operation.
    Automatic Reciprocating Bed movement, Longitudinally and Up Feed.
    Bed Positioning DRO.   Pneumatic Fixture Clamping.
    Drive Motor per cent load meter.
Inventory Reference G3975-9650  
vertical abrasive belt sander - grinder, burlington reciprocating bed abrasive grinder, model S36X75R, capacity belt 36 inch wide, automatic feed bed with rise and fall, bed 24 inch x 45 inch, bed hight dro, belt drive 30 hp, date manufactured 11-1998, Serial Number 13512664
vertical abrasive belt sander - grinder, burlington reciprocating bed abrasive grinder, model S36X75R, capacity belt 36 inch wide, automatic feed bed with rise and fall, bed 24 inch x 45 inch, bed hight dro, belt drive 30 hp, date manufactured 11-1998, Serial Number 13512664, photo front
Photo Front view.     vertical abrasive belt sander - grinder, burlington reciprocating bed abrasive grinder, model S36X75R, capacity belt 36 inch wide, automatic feed bed with rise and fall, bed 24 inch x 45 inch, bed hight dro, belt drive 30 hp, date manufactured 11-1998, Serial Number 13512664 Photo Part Holding Fixture.    vertical abrasive belt sander - grinder, burlington reciprocating bed abrasive grinder, model S36X75R, capacity belt 36 inch wide, automatic feed bed with rise and fall, bed 24 inch x 45 inch, bed hight dro, belt drive 30 hp, date manufactured 11-1998, Serial Number 13512664, photo right side view with out part fixture Photo Front to right side view.
vertical abrasive belt sander - grinder, burlington reciprocating bed abrasive grinder, model S36X75R, capacity belt 36 inch wide, automatic feed bed with rise and fall, bed 24 inch x 45 inch, bed hight dro, belt drive 30 hp, date manufactured 11-1998, Serial Number 13512664, photo close up bed height DRO
Photo Close-up Bed Height DRO.     vertical abrasive belt sander - grinder, burlington reciprocating bed abrasive grinder, model S36X75R, capacity belt 36 inch wide, automatic feed bed with rise and fall, bed 24 inch x 45 inch, bed hight dro, belt drive 30 hp, date manufactured 11-1998, Serial Number 13512664, photo rear view Photo Rear view.
vertical abrasive belt sander - grinder, burlington reciprocating bed abrasive grinder, model S36X75R, capacity belt 36 inch wide, automatic feed bed with rise and fall, bed 24 inch x 45 inch, bed hight dro, belt drive 30 hp, date manufactured 11-1998, Serial Number 13512664, photo view inside sanding belt chamber
Photo View inside drum and belt cabinet.   vertical abrasive belt sander - grinder, burlington reciprocating bed abrasive grinder, model S36X75R, capacity belt 36 inch wide, automatic feed bed with rise and fall, bed 24 inch x 45 inch, bed hight dro, belt drive 30 hp, date manufactured 11-1998, Serial Number 13512664, Left side view Photo Left side view.
 WE NEED SPACE and we have discounted our price to $9,750.00



 

EDGE BELT SANDERS

INDIANA SINGLE SIDE EDGE SANDER Model  ES1
CAPACITY:
    
Vertical Platen working area  8" Height x 54"  Length
     Contact Drum on Left Side,
4" Diameter x 8" Height
SANDING / GRINDING BELT
8" Height x 144" Length
TABLE:
     Working Surface,
10Ύ"D x 56" L
      Tilting 45 degrees Down
      Height adjustment  adjust Up /  Down by hand crank.
MOTOR 5 hp 220 volts
EQUIPPED WITH:
     Drive Pulley 10" diameter.   Contact Drum 4" diameter
     Dust Guard and Pick Up port 5⅝" diameter
Inventory Reference W8351-10316  
EDGE SANDER, SINGLE SIDE INDIANA, Capacity Vertical Platen working area 8" Height x 54"Length, Contact Drum on Left Side, 4", Diameter x 8"Height, Size Sanding-Grinding Belt  8" Height x 144"Length, Tilting and adjust Up-Down, 5 hp Motor, Model  ES1
  EDGE SANDER, SINGLE SIDE INDIANA, Capacity Vertical Platen working area 8" Height x 54"Length, Contact Drum on Left Side, 4", Diameter x 8"Height, Size Sanding-Grinding Belt  8" Height x 144"Length, Tilting Table Working Surface, 10Ύ" D x 56" L, Tables adjust Up-Down, 5 hp Motor, Model  ES1, Photo front view Photo Front view.
        EDGE SANDER, SINGLE SIDE INDIANA, Capacity Vertical Platen working area 8" Height x 54"Length, Contact Drum on Left Side, 4", Diameter x 8"Height, Size Sanding-Grinding Belt  8" Height x 144"Length, Tilting Table Working Surface, 10Ύ" D x 56" L, Tables adjust Up-Down, 5 hp Motor, Model  ES1, Photo Radius Drum on Left side.
Photo Radius Drum on Left side.     EDGE SANDER, SINGLE SIDE INDIANA, Capacity Vertical Platen working area 8" Height x 54"Length, Contact Drum on Left Side, 4", Diameter x 8"Height, Size Sanding-Grinding Belt  8" Height x 144"Length, Tilting Table Working Surface, 10Ύ" D x 56" L, Tables adjust Up-Down, 5 hp Motor, Model  ES1, Photo Front view showing Tilt Table Elevation Photo Front view showing Tilt Table Elevation.
EDGE SANDER, SINGLE SIDE INDIANA, Capacity Vertical Platen working area 8" Height x 54"Length, Contact Drum on Left Side, 4", Diameter x 8"Height, Size Sanding-Grinding Belt  8" Height x 144"Length, Tilting Table Working Surface, 10Ύ" D x 56" L, Tables adjust Up-Down, 5 hp Motor, Model  ES1, Photo Motor Drive to Front view
Photo Motor Drive to Front view.
 WE NEED SPACE and we have discounted our price to $1,750.00
 



"For your Sanding Requirements"

                           
Please Call: 1- 213-627-2847
                                          Fax: 1- 213-627-2499
                                           E-mail us at:   sales@centurymachinery.com







SANDER: Combined with LATHE, ETC





SANDERS, DISC


20" diameter MAX double DISC SANDER
Model 20-DD      Heavy Duty

2-Tables each has a working surface of 12" x 24½"
    and tilt up/down with rise and fall vertical movement.
Disc Motor Drive 2hp
Equipped with:
   two 1/3 hp Exhaust blowers.

Inventory Reference S0453-10285 max heavy duty two 20 inch diameter sanding  discs, model 20-DD, capacity each sanding discs 20 inch diameter, size each tilting table 12 inch x 27 inch with rise and fall, disc drive 3 hp, equipped two exhaust blower, Serial 20DD, 13499-10-14



30" diameter disc MAX Disc Sander
Model 30-SD

Table working surface 14" x 38.5"
Table Tilts 30° up and 45° down
Table Carriage has rise and fall vertical movement.
Disc Motor Drive  5 hp.

Inventory Reference S0453-10308 max heavy duty single disc sander, 30 inch disc diameter, model 30-SD, tilting table 15 inch x 38.5 inch with rise and fall, motor drive 5 HP  max heavy duty single disc sander, 30 inch disc diameter, model 30-SD, tilting table 15 inch x 38.5 inch with rise and fall, motor drive 5 HP, Photo Front Photo Front.   max heavy duty single disc sander, 30 inch disc diameter, model 30-SD, tilting table 15 inch x 38.5 inch with rise and fall, motor drive 5 HP, Photo Right Side Photo Right Side.
max heavy duty single disc sander, 30 inch disc diameter, model 30-SD, tilting table 15 inch x 38.5 inch with rise and fall, motor drive 5 HP, Photo Left Side to Front Photo Left Side to Front.    max heavy duty single disc sander, 30 inch disc diameter, model 30-SD, tilting table 15 inch x 38.5 inch with rise and fall, motor drive 5 HP, Photo Right Side at Rear Photo Right Side at Rear.    max heavy duty single disc sander, 30 inch disc diameter, model 30-SD, tilting table 15 inch x 38.5 inch with rise and fall, motor drive 5 HP, Photo Rear to Left Side Photo Rear to Left Side.




CHECK OUT PHOTOS
THIS SANDER HAS BEEN fully reconditioned

30" diameter disc MAX Spindle Sander and  Combination Disc SANDER
Model 30-DVS
Spindle Sander 30-D
with Oscillating Spindle and  Tilt Table
     Table working surface 24" x 24"
     Tilts 10
° up and 45° down
 
Spindle Motor Drive for both units 1 hp.

 Disc Sander VS-1
has tilting table and has rise and fall vertical movement
 Table working surface 15" x 38.5"
 Disc Motor Dive  5 hp

Inventory Reference
S0453- S0403-9203 max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30
max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo right side view disc sander
Photo right side view Disc Sander.        max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo Spindle Sander at its Right Side Photo Spindle Sander at its Right Side.
 
max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo Side over-all view.
Photo Side over-all view.




"NEW" 
MAX DISC SANDERS
  12" thru 36" Single & Double Disc's
MAX SPINDLE SANDER   Model VSI-17 & VSI-18

Tel: 1-213-627-2847
E-Mail us at:   sales@centurymachinery.com
Fax: 1- 213-627-2499







SANDERS, DISC & SPINDLE: Combination

THIS SANDER HAS BEEN fully reconditioned
30" diameter disc MAX Spindle Sander and  Combination Disc SANDER
Model 30-DVS
Spindle Sander 30-D
with Oscillating Spindle and  Tilt Table
     Table working surface 24" x 24"
     Tilts 10
° up and 45° down
 
Spindle Motor Drive for both units 1 hp.

 Disc Sander VS-1
has tilting table and has rise and fall vertical movement
 Table working surface 15" x 38.5"
 Disc Motor Dive  5 hp

Inventory Reference
S0453- S0403-9203  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30
        max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo right side view disc sander Photo right side view Disc Sander. 
max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo Spindle Sander at its Right Side
Photo Spindle Sander at its Right Side.    max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo Side over-all view. Photo Side over-all view.
 







SANDERS, EDGE

INDIANA SINGLE SIDE EDGE SANDER Model  ES1
CAPACITY:
    
Vertical Platen working area  8" Height x 54"  Length
     Contact Drum on Left Side,
4" Diameter x 8" Height
SANDING / GRINDING BELT
8" Height x 144" Length
TABLE:
     Working Surface,
10Ύ"D x 56" L
      Tilting 45 degrees Down
      Height adjustment  adjust Up /  Down by hand crank.
MOTOR 5 hp 220 volts
EQUIPPED WITH:
     Drive Pulley 10" diameter.   Contact Drum 4" diameter
     Dust Guard and Pick Up port 5⅝" diameter
Inventory Reference W8351-10316  
EDGE SANDER, SINGLE SIDE INDIANA, Capacity Vertical Platen working area 8" Height x 54"Length, Contact Drum on Left Side, 4", Diameter x 8"Height, Size Sanding-Grinding Belt  8" Height x 144"Length, Tilting and adjust Up-Down, 5 hp Motor, Model  ES1  EDGE SANDER, SINGLE SIDE INDIANA, Capacity Vertical Platen working area 8" Height x 54"Length, Contact Drum on Left Side, 4", Diameter x 8"Height, Size Sanding-Grinding Belt  8" Height x 144"Length, Tilting and adjust Up-Down, 5 hp Motor, Model  ES1, Photo front view
Photo Front view.
        EDGE SANDER, SINGLE SIDE INDIANA, Capacity Vertical Platen working area 8" Height x 54"Length, Contact Drum on Left Side, 4", Diameter x 8"Height, Size Sanding-Grinding Belt  8" Height x 144"Length, Tilting and adjust Up-Down, 5 hp Motor, Model  ES1, Photo Radius Drum on Left side.
Photo Radius Drum on Left side.     EDGE SANDER, SINGLE SIDE INDIANA, Capacity Vertical Platen working area 8" Height x 54"Length, Contact Drum on Left Side, 4", Diameter x 8"Height, Size Sanding-Grinding Belt  8" Height x 144"Length, Tilting and adjust Up-Down, 5 hp Motor, Model  ES1, Photo Front view showing Tilt Table Elevation Photo Front view showing Tilt Table Elevation.
EDGE SANDER, SINGLE SIDE INDIANA, Capacity Vertical Platen working area 8" Height x 54"Length, Contact Drum on Left Side, 4", Diameter x 8"Height, Size Sanding-Grinding Belt  8" Height x 144"Length, Tilting and adjust Up-Down, 5 hp Motor, Model  ES1, Photo Motor Drive to Front view
Photo Motor Drive to Front view.
 WE NEED SPACE and we have discounted our price to $1,750.00


SANDERS, MULTIPLE DRUMS 





SANDERS, SPINDLE 


MAX OSCILLATING SPINDLE SANDER

  
Model VS-1  Heavy Duty
TILTING TABLE:
Size 24" x 24"
     
Forward 45 degrees
MOTOR DRIVE 1 H.P.
BOTH Sanders EQUIPPED WITH:
    
SPINDLES with Rubber Sleeve
       (1) 3/4" dia. x 9" long Spindles with 4" dia rubber sleeve
       (
1) 3/4" dia. x 9" long Spindles with 3" dia rubber sleeve
       (1) 3/4" dia. x 9" long Spindles with 2" dia rubber sleeve
       (1) 3/4" dia. x 9" long Spindles with 1½" dia rubber sleeve
     
SPINDLES:   (1) 3/4" dia. x 9" long Spindles      (1) 3/4" dia. x 6" long Spindles
       (1) 3/8" dia. x 5⅞ long Spindle      (1) 1/4" dia. x 4-11/16 long Spindle
       (2) Table insert plated
Inventory Reference S0403-10313 MAX SINGLE OSCILLATING SPINDLE SANDER, Model VS-1 Heavy Duty, TILTING TABLE: Size 24" x 24", MOTOR DRIVE 1 H.P, Equipped with Rubber Sleeve, (1) 3/4" dia. x 9" long Spindles with 4" dia rubber sleeve, (1) 3/4" dia. x 9" long Spindles with 3" dia rubber sleeve, (1) 3/4" dia. x 9" long Spindles with 2" dia rubber sleeve, (1) 3/4" dia. x 9" long Spindles with 1½" dia rubber sleeve, SPINDLES (1) 3/4" dia. x 9" long, Spindles, (1) 3/4" dia. x 6" long Spindles, (1) 3/8" dia. x 5⅞ long Spindle, (1) 1/4" dia. x  4-11/16 long Spindle, (2) Table insert plated, Serial VS-3195   MAX SINGLE OSCILLATING SPINDLE SANDER, Model VS-1 Heavy Duty, TILTING TABLE: Size 24" x 24", MOTOR DRIVE 1 H.P, Equipped with Rubber Sleeve, (1) 3/4" dia. x 9" long Spindles with 4" dia rubber sleeve, (1) 3/4" dia. x 9" long Spindles with 3" dia rubber sleeve, (1) 3/4" dia. x 9" long Spindles with 2" dia rubber sleeve, (1) 3/4" dia. x 9" long Spindles with 1½" dia rubber sleeve, SPINDLES (1) 3/4" dia. x 9" long, Spindles, (1) 3/4" dia. x 6" long Spindles, (1) 3/8" dia. x 5⅞ long Spindle, (1) 1/4" dia. x  4-11/16 long Spindle, (2) Table insert plated, Serial VS-3195, Photo Front view
Photo Front view.




JET OSCILLATING SPINDLE SANDER

   Model OVS-10     Stock 70B410     Heavy Duty
TILTING TABLE:
Size 24-5/16" x 24-5/16"
     
Forward 45 degrees
MOTOR DRIVE 1 H.P.115 volts
EQUIPPED WITH:
     SPINDLES only:
       
(1) 1/4" diameter x 4½" long.        (1) 1/2" diameter x 6" long.
        (1) 3/4" diameter x 9" long.
        (1) 3/4" diameter x 9" long with threads for compressions nut.
     SPINDLES with RUBBER SLEEVES:
       
(1) 2" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle.
        (1) 3" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle.
        (1) 4" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle.
     RUBBER SLEEVES:
      
  (1) 3" dia. x 9" long.  (1) 4" dia. x 9" long

Inventory Reference S0403-10282
CLICK HERE FOR QUOTATION JET heavy duty VERTICAL OSCILLATING SPINDLE SANDER, Model OVS-10, Stock 70B410, Spindle Speed 1725 rpm, Oscillating 75 strokes per minute, Length of Oscillation 1½", Tilting Table 24-5/16" x 24-5/16", Tilting 45 degrees, MOTOR DRIVES 1 H.P.115 volts, EQUIPPED WITH SPINDLES only (1) 1/4" diameter x 4½" long,  (1) 1/2" diameter x 6" long, (1) 3/4" diameter x 9" long, (1) 3/4" diameter x 9" long with threads for compressions nut, SPINDLES with RUBBER SLEEVES (1) 2" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle, (1) 3" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle, (1) 4" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle, RUBBER SLEEVES (1) 3" dia. x 9" long, (1) 4" dia. x 9" long, Serial Number 401016    CLICK HERE FOR PHOTO  JET heavy duty VERTICAL OSCILLATING SPINDLE SANDER, Model OVS-10, Stock 70B410, Spindle Speed 1725 rpm, Oscillating 75 strokes per minute, Length of Oscillation 1½", Tilting Table 24-5/16" x 24-5/16", Tilting 45 degrees, MOTOR DRIVES 1 H.P.115 volts, EQUIPPED WITH SPINDLES only (1) 1/4" diameter x 4½" long,  (1) 1/2" diameter x 6" long, (1) 3/4" diameter x 9" long, (1) 3/4" diameter x 9" long with threads for compressions nut, SPINDLES with RUBBER SLEEVES (1) 2" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle, (1) 3" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle, (1) 4" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle, RUBBER SLEEVES (1) 3" dia. x 9" long, (1) 4" dia. x 9" long, Serial Number 401016, Photo Left Side to Front view
Photo Left Side to Front.       CLICK HERE FOR PHOTO    JET heavy duty VERTICAL OSCILLATING SPINDLE SANDER, Model OVS-10, Stock 70B410, Spindle Speed 1725 rpm, Oscillating 75 strokes per minute, Length of Oscillation 1½", Tilting Table 24-5/16" x 24-5/16", Tilting 45 degrees, MOTOR DRIVES 1 H.P.115 volts, EQUIPPED WITH SPINDLES only (1) 1/4" diameter x 4½" long,  (1) 1/2" diameter x 6" long, (1) 3/4" diameter x 9" long, (1) 3/4" diameter x 9" long with threads for compressions nut, SPINDLES with RUBBER SLEEVES (1) 2" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle, (1) 3" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle, (1) 4" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle, RUBBER SLEEVES (1) 3" dia. x 9" long, (1) 4" dia. x 9" long, Serial Number 401016, Photo Front to Right Side Photo Front to Right Side.



OLIVER Manual & Power TILTING SPINDLE SANDER

  
Model 381-DM   HEAVY DUTY
OSCILLATING
POWER TILTING SPINDLE: Forward 45 degrees
                                                  Backward 5 degrees
SPINDLE SHAFT SIZE: 1” diameter x 9”
      with 8” diameter rubber sleeve.
TABLE SIZE 37” x 37”
SPINDLE DRIVE: 1 H.P.
TILTING SPINDLE DRIVE 1/4 hp.

Inventory Reference S0403-15840 
CLICK HERE FOR QUOTATION  jet oscillating vertical spindle sander_model JOVS-10_tilting table 24 inch x 24 inch_spindle strokes 75 spm_motor drive 1 hp 115 volts_Stock 708411_Serial 2103164

 

Please CHECK OUT PHOTOS
THIS SANDER HAS BEEN fully reconditioned

                                                                                        
30" diameter disc MAX Spindle Sander and  Combination Disc SANDER
Model 30-DVS
Spindle Sander 30-D
with Oscillating Spindle and  Tilt Table
     Table working surface 24" x 24"
     Tilts 10
° up and 45° down
 
Spindle Motor Drive for both units 1 hp.

 Disc Sander VS-1
has tilting table and has rise and fall vertical movement
 Table working surface 15" x 38.5"
 Disc Motor Dive  5 hp

Inventory Reference
S0453- S0403-9203  CLICK HERE FOR QUOTATION  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30
CLICK HERE FOR PHOTO  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo right side view disc sander
Photo right side view Disc Sander.        CLICK HERE FOR PHOTO  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo Spindle Sander at its Right Side Photo Spindle Sander at its Right Side.    CLICK HERE FOR PHOTO  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo Side over-all view. Photo Side over-all view.




"NEW" MAX SPINDLE SANDER 
         Model VS1

Spindle Sander with Oscillating Spindle and  Tilt Table
    Table working surface 24" x 24"
    Tilts 10
° up and 45° down
Spindle Motor Drive 1 hp.  
Inventory
Reference S0452-

"NEW" MAX SPINDLE and DISC SANDER



       "Please E-Mail or Fax us your Sanding Requirements"
                           E-Mail us at:   sales@centurymachinery.com
                                       Fax: 1- 213-627-2499





VERTICAL BAND SAWS S0690-



16" throat DOALL VERTICAL BAND SAW  Model 16-3
HEAVY DUTY
Height under Guide 8½"

Saw Blade Variable Speed 25 thru 6,000 fpm.
Motor Drive 3 hp.
EQUIPPED WITH:
 Heavy Duty Tilting Table with Power Feed
    Tilts
(45° right and 10°left)
 Blade Welder and Grinder.
 Mist Coolant & Air Jet.    Work Lights.
Inventory Reference S0690-9820  doAll 16 inch vertical band saw, model 16-3, capacity throat 16 inch, height under guide 8.5 inch, power feed table 24 inch x 24 inch, vari blade speed 25-6000 fpm thru 3 speed gear box, drive 3 hp, Serial 505314   doAll 16 inch vertical band saw, model 16-3, capacity throat 16 inch, height under guide 8.5 inch, power feed table 24 inch x 24 inch, vari blade speed 25-6000 fpm thru 3 speed gear box, drive 3 hp, Serial 505314
Photo Front view.    doAll 16 inch vertical band saw, model 16-3, capacity throat 16 inch, height under guide 8.5 inch, power feed table 24 inch x 24 inch, vari blade speed 25-6000 fpm thru 3 speed gear box, drive 3 hp, Serial 505314, Front Band Wheels Doors Open Photo Band Wheel Doors open.
doAll 16 inch vertical band saw, model 16-3, capacity throat 16 inch, height under guide 8.5 inch, power feed table 24 inch x 24 inch, vari blade speed 25-6000 fpm thru 3 speed gear box, drive 3 hp, Serial 505314, Rear view over view of drives 
Photo Rear view over view of drives.   doAll 16 inch vertical band saw, model 16-3, capacity throat 16 inch, height under guide 8.5 inch, power feed table 24 inch x 24 inch, vari blade speed 25-6000 fpm thru 3 speed gear box, drive 3 hp, Serial 505314, Photo Rear view close-up of drives Photo Rear view close-up of drives.
doAll 16 inch vertical band saw, model 16-3, capacity throat 16 inch, height under guide 8.5 inch, power feed table 24 inch x 24 inch, vari blade speed 25-6000 fpm thru 3 speed gear box, drive 3 hp, Serial 505314, Photo Rear view close-up of drives 
Photo Rear view another angle close-up of drives.   doAll 16 inch vertical band saw, model 16-3, capacity throat 16 inch, height under guide 8.5 inch, power feed table 24 inch x 24 inch, vari blade speed 25-6000 fpm thru 3 speed gear box, drive 3 hp, Serial 505314, Photo Rear view with Drive Guard On. Photo Rear view with Drive Guard On.




20" throat POWERMATIC VERTICAL BAND SAW  Model 81
Height under Guide 12"
BLADE: 2-Speeds,
    Low Range 2000 fpm.    High Range 4500 fpm 
TABLE 24" x 24" Tilting by Hand.
MOTOR DRIVE Motors wired 220 volt
   Main 2 hp
Inventory Reference S0690-10425
20" throat POWERMATIC VERTICAL BAND SAW Model 81, Height under Guide 12",




20" throat WELLSAW VERTICAL BAND SAW  Model W20
Height under Guide 16
½"
Saw Blade Variable Speed
Motor Drive 3/4 hp. 110 volts Single Phase
     Motor drive thru gear box to pulley.
EQUIPPED WITH:
 Blade Welder, Grinder and Shear
 Tilting Table
Inventory Reference S0690-10265  CLICK HERE FOR QUOTATION   wellsaw vertical band saw, 20 in, model W20, HUG 16.5 in,Vari blade speed, 3-4 hp 110volts, blade welder-grinder, Serial Number1201

CLICK HERE FOR PHOTO   wellsaw vertical band saw, 20 in, model W20, HUG 16.5 in,Vari blade speed, 3-4 hp 110volts, blade welder-grinder, Serial Number 1201, Photo Front view Photo Front view.    CLICK HERE FOR PHOTO  wellsaw vertical band saw, 20 in, model W20, HUG 16.5 in,Vari blade speed, 3-4 hp 110volts, blade welder-grinder, Serial Number 1201, Photo Blade Welder - Grinder located behind wheel guard Photo Blade Welder - Grinder located behind wheel guard.





THIS BAND SAW HAS BEEN SOLD

26" throat DOALL VERTICAL BAND SAW  
Model 2613-3

PHOTOS TAKEN PRIOR TO CLEAN-UP CLICK HERE FOR PHOTO  doall Vertical band saw_model 2613-3_capacity throat 36 inch x 13 inch height under guide_blade speed 40 - 10800 fpm_hydraulic power feed-tilt table_power rise guide arm_10 hp_Serial Number 198-69350_Prior to Clean-up  Front view.


PHOTOS just taken after reconditioning
CLICK HERE FOR PHOTO  doall Vertical band saw_model 2613-3_capacity throat 36 inch x 13 inch height under guide_blade speed 40-10800 fpm_hydraulic power feed-tilt table_power rise guide arm_10 hp_Serial Number 198-69350_Front view 
Photo Front view.        CLICK HERE FOR PHOTO  doall Vertical band saw_model 2613-3_capacity throat 36 inch x 13 inch height under guide_blade speed 40-10800 fpm_hydraulic pwr feed-tilt table_pwr rise guide arm_10 hp_Serial Number 198-69350_Left side drive cover removed Photo Right Side to Rear Drive cover removed.
  CLICK HERE FOR PHOTO  doall Vertical band saw_model 2613-3_capacity throat 36 inch x 13 inch height under guide_blade speed 40-10800 fpm_hydraulic power feed-tilt table_power rise guide arm_10 hp_Serial Number 198-69350_Close-up motor drive 
Photo Close-up Motor Drives.



36" throat DO ALL VERTICAL BAND SAW  Model 3613-20    Mfg. 1986
Height under Guide 13"
BLADE: Infinity Variable Thru 2-Speed Gear Box,
      1st  Range Low Range...2 – 85 fpm.    High.... 25 – 275 fpm
      2nd Range Low Range...305 – 1000 fpm.    High 1524 – 5000 fpm
Solid State, Speed Control
TABLE 26" x 26" Tilting by Hand.
MOTOR DRIVE Motors wired 440 volt
   Main 3 H.P. 180 volts, Single Phase
EQUIPPED WITH:
   Blade Welder.
   Blade Grinder.
   Blade Shear.
Inventory Reference S0690-10051
CLICK HERE FOR QUOTATION  doall 36 inch thoat vertical band saw_moddel 3613-20_throat depth 36 inch x 13 inch heightt under guide_2 spd range_solid state band saw blade controls_band saw blade vari speed thru high-low range 2 thru 5000 fpm_tilting table 26 inch x 26 inch_dc motor 3 hp 180 volt single phase_mfg 1986_Serial Number 399-86-623
 CLICK HERE FOR PHOTO  doall 36 inch throat vertical band saw_3613-20_throat depth 36 inch x 13 inch height under top band saw guide_band saw blade driven by solid state drive thru two speed ranges_band saw speed infinitely variable 2 thru 5000 fpm_tilting table size 26 inch x 26 inch_mfg date 1986_equippped with band saw blade welder and grinder_work light_Serial Number 399-86-623_Photo Side view 
Photo Front view.       CLICK HERE FOR PHOTO  doall 36 inch throat vertical band saw_3613-20_throat depth 36 inch x 13 inch height under top band saw guide_band saw blade driven by solid state drive thru two speed ranges_band saw speed infinitely variable 2 thru 5000 fpm_tilting table size 26 inch x 26 inch_mfg date 1986_equippped with band saw blade welder and grinder_work light_Serial Number 399-86-623_Photo End view Photo End view.



36"
throat DOALL VERTICAL BAND SAW  Model  3612-3
Height under guide 13"

Saw Blade Variable Speed: 25 thru 6,000 fpm.
Motor Drive 3 hp.
Equipped with:
 Heavy Duty Table  with Power Feed and
    Foot Control Trip Switch.
 Blade Welder and Grinder.
 Mist Coolant.     Work Lights.
Inventory Reference S0690-10090  CLICK HERE FOR QUOTATION  doall 36 inch throat vertical band saw_model 3612-3_capacity 36 inch throat depth x 13 inch height under guide_blade speed variable 25 - 6000 fpm_power feed tilting table 24 inch x 30.5 inch_drive 3 hp_Serial Number 153-701094
These photos are of another Do All just sold, this what you can expect ► doall 36 inch throat vertical band saw_model 3612-3_capacity 36 inch throat depth x 13 inch height under guide_blade speed variable 56 - 6000 fpm_power feed tilting table 24 inch x 30.5 inch_drive 3 hp_Serial Number 153-6317
Photo Front view.
doall 36 inch throat vertical band saw_model 3612-3_capacity 36 inch throat depth x 13 inch height under guide_blade speed variable 56 - 6000 fpm_power feed tilting table 24 inch x 30.5 inch_3 hp_Serial Number 153-6317_wheel guards open
Photo View drive wheels.     CLICK HERE FOR PHOTO  doall 36 inch throat vertical band saw_model 3612-3_capacity 36 inch throat depth x 13 inch height under guide_blade speed variable 56 - 6000 fpm_power feed tilting table 24 inch x 30.5 inch_3 hp_Serial Number 153-6317_Rear view Photo Rear View.      Cdoall 36 inch throat vertical band saw_model 3612-3_capacity 36 inch throat depth x 13 inch height under guide_blade speed variable 56 - 6000 fpm_power feed tilting table 24 inch x 30.5 inch_3 hp_Serial Number 153-6317_Rear view Photo Rear View with motor drive.



36"
throat DOALL VERTICAL BAND SAW,  Friction Saw, ZEPHYR , ZW-3620
Height under guide 21"

Saw Blade Speed, Infinitely Variable: 70 -15,000 fpm.
   
Three Speed Ranges
Table Tilts down thru 45°
Motor Drive 15 hp.
Inventory Reference S0690-10172  CLICK HERE FOR QUOTATION  doAll 36 inch throat vertical band, type zepher, model ZW-3620, throat depth 36 inch, height under guide 21 inch_blade speed variable 70 thru 15000 fpm_tilting table 30 inch x 36 inch, Serial Number 31-672476
CLICK HERE FOR PHOTO  doAll 36 inch throat vertical band, type zepher, model ZW-3620, throat depth 36 inch, height under guide 21 inch_blade speed variable 70 thru 13000 fpm_tilting table 30 inch x 36 inch, Serial Number 31-672476, Photo Front view 
Photo Front view.    CLICK HERE FOR PHOTO  doAll 36 inch throat vertical band, type zepher, model ZW-3620, throat depth 36 inch, height under guide 21 inch_blade speed variable 70 thru 13000 fpm_tilting table 30 inch x 36 inch, Serial Number 31-672476, Photo Rear view Photo Rear view.





36" throat TANNEWITZ VERTICAL BAND SAW  Model GH    *Rebuilt*
Height under guide 20
"              
36" x 37" Main Table, tilts down thru 45°      
Motor  Drive 5 hp

Inventory Reference S0690-16605   "These four photos show rebuilding from start to finish.  CLICK HERE FOR PHOTO  tannewitz 36 inch throat vertical band saw_model GH_throat depth 36 inch_being rebuilt for Lockheed Photo
 

36" throat TANNEWITZ VERTICAL BAND SAW Model GHS
34
" HEIGHT UNDER BLADE GUIDE
Clear height under upper Band Wheel adjustment hand wheel 32"

             
36" x 37" Main Table, tilts down thru 45°        
Motor  Drive 5 hp

Inventory Reference S0690-10311  CLICK HERE FOR QUOTATION  36" throat TANNEWITZ VERTICAL BAND SAW, Model GHS, with EXTRA HEIGHT under upper band wheel adjustment wheel 32”,  Height under Blade Guide 34", Tilting Table 36" x 36" tilts down right thru 45° and up or left 5 degrees, Motor Drive 5 hp, Serial 14950
PHOTO'S just taken prior to clean-up
▼                                                    ▼

CLICK HERE FOR PHOTO  36" throat TANNEWITZ VERTICAL BAND SAW, Model GHS, with EXTRA HEIGHT under upper band wheel adjustment wheel 32”,  Height under Blade Guide 34", Tilting Table 36" x 36" tilts down right thru 45° and up or left 5 degrees, Motor Drive 5 hp, Serial 14950, Photo Left side to Front.
Photo Left side to Front.               CLICK HERE FOR PHOTO  36" throat TANNEWITZ VERTICAL BAND SAW, Model GHS, with EXTRA HEIGHT under upper band wheel adjustment wheel 32”,  Height under Blade Guide 34", Tilting Table 36" x 36" tilts down right thru 45° and up or left 5 degrees, Motor Drive 5 hp, Serial 14950, Photo Front to Right Side Photo Front to Right side.
 
CLICK HERE FOR PHOTO  36" throat TANNEWITZ VERTICAL BAND SAW, Model GHS, with EXTRA HEIGHT under upper band wheel adjustment wheel 32”,  Height under Blade Guide 34", Tilting Table 36" x 36" tilts down right thru 45° and up or left 5 degrees, Motor Drive 5 hp, Serial 14950, Photo Side view under table showing Direct Drive Motor & Table Tilt Handwheel. Photo Side view under table showing Direct Drive Motor & Table Tilt Handwheel. 
 
CLICK HERE FOR PHOTO  36" throat TANNEWITZ VERTICAL BAND SAW, Model GHS, with EXTRA HEIGHT under upper band wheel adjustment wheel 32”,  Height under Blade Guide 34", Tilting Table 36" x 36" tilts down right thru 45° and up or left 5 degrees, Motor Drive 5 hp, Serial 14950, Photo Upper Band Saw Guide Photo Upper Band Saw Guide.
CLICK HERE FOR PHOTO  36" throat TANNEWITZ VERTICAL BAND SAW, Model GHS, with EXTRA HEIGHT under upper band wheel adjustment wheel 32”,  Height under Blade Guide 34", Tilting Table 36" x 36" tilts down right thru 45° and up or left 5 degrees, Motor Drive 5 hp, Serial 14950, Photo Lower Band Saw Guide and Drive Wheel
Photo Lower Band Saw Guide and Drive Wheel.



36"  throat TANNEWITZ VERTICAL BAND SAW   Model GV-1   
                               "To be Rebuilt to your order"
Height under guide 20"
Variable Band Speed: 2,000 thru 12,000 fpm
36" x 37" Main
Table, tilts down thru 45°
Motor Drive10 hp
Vari Speed
Inventory ReferenceS0690-8760  CLICK HERE FOR QUOTATION  tannewitz 36 inch throat vertical band saw_model GV-1_throat depth 36 inch_height under guide 20 inch_vari blade speed drive 10 hp_tilting table 36 inch x 37 inch_Serial Number 10908



36"  throat YATES AMERICAN VERTICAL BAND SAW  Model Y-36
Height under guide 20
"               HEAVY DUTY
36" x 36 Main
Table, tilts down thru 45°
Auxiliary Table 17" x 22"
Motor  Drive 7½ hp

Inventory Reference S0690-10314  CLICK HERE FOR QUOTATION  36 inch throat yates american vertical  band saw, model B-36, Height under Guide 20 in, direct drive 7.5 hp 860 rpm motor, Serial B26573   CLICK HERE FOR PHOTO  36 inch throat yates american vertical  band saw, model B-36, Height under Guide 20 in, direct drive 7.5 hp 860 rpm motor, Serial B26573,  Photo Front view Photo Front view.    CLICK HERE FOR PHOTO  36 inch throat yates american vertical  band saw, model B-36, Height under Guide 20 in, direct drive 7.5 hp 860 rpm motor, Serial B26573, Photo Rear view Photo Rear view.



40" throat TANNEWITZ VERTICAL BAND SAW  Model TR-4012-VW
Height under guide 12Ύ"

Saw Blade Variable Speed: 50 thru 5230 fpm.
     thru 4 speed gear box.
POWER FEED TABLE: Size 29½" LR x 27½" FB
     Table stroke adjustable thru 14Ύ"
     Tilts 45° right and 15° left.
Motor Drives:  Blade 3 hp.    Table Hydraulic Pump ½ hp.
Equipped with:
  Blade Welder and Grinder.  Blade Speed Indicator.
  Mist Coolant.     Work Lights.
NOTE This band saw has four band wheels.
Inventory Reference S0690-10281  CLICK HERE FOR QUOTATION  40" throat TANNEWITZ VERTICAL BAND SAW, Model TR-4012-VW, Height under guide 12Ύ", Saw Blade Variable Speed: 50 thru 5230 fpm thru 4 speed gear box, POWER FEED TABLE: Size 29½" LR x 27½" FB, Table stroke adjustable thru 14Ύ", Tilts 45° right and 15° left,  Motor Drives Blade 3 hp and Table Hydraulic Pump ½ hp, Equipped with Blade Welder and Grinder, Blade Speed Indicator, Mist Coolant, Work Lights, Serial Number 94402, Mfg 1994   CLICK HERE FOR PHOTO  40" throat TANNEWITZ VERTICAL BAND SAW, Model TR-4012-VW, Height under guide 12Ύ", Saw Blade Variable Speed: 50 thru 5230 fpm thru 4 speed gear box, POWER FEED TABLE: Size 29½" LR x 27½" FB, Table stroke adjustable thru 14Ύ", Tilts 45° right and 15° left,  Motor Drives Blade 3 hp and Table Hydraulic Pump ½ hp, Equipped with Blade Welder and Grinder, Blade Speed Indicator, Mist Coolant, Work Lights, Serial Number 94402, Mfg 1994, Photo Front
Photo Front.   CLICK HERE FOR PHOTO  40" throat TANNEWITZ VERTICAL BAND SAW, Model TR-4012-VW, Height under guide 12Ύ", Saw Blade Variable Speed: 50 thru 5230 fpm thru 4 speed gear box, POWER FEED TABLE: Size 29½" LR x 27½" FB, Table stroke adjustable thru 14Ύ", Tilts 45° right and 15° left,  Motor Drives Blade 3 hp and Table Hydraulic Pump ½ hp, Equipped with Blade Welder and Grinder, Blade Speed Indicator, Mist Coolant, Work Lights, Serial Number 94402, Mfg 1994, Photo Rear to Front Photo Rear to Front.
CLICK HERE FOR PHOTO  40" throat TANNEWITZ VERTICAL BAND SAW, Model TR-4012-VW, Height under guide 12Ύ", Saw Blade Variable Speed: 50 thru 5230 fpm thru 4 speed gear box, POWER FEED TABLE: Size 29½" LR x 27½" FB, Table stroke adjustable thru 14Ύ", Tilts 45° right and 15° left,  Motor Drives Blade 3 hp and Table Hydraulic Pump ½ hp, Equipped with Blade Welder and Grinder, Blade Speed Indicator, Mist Coolant, Work Lights, Serial Number 94402, Mfg 1994, Photo Right End to Front
Photo Right End to Front.     CLICK HERE FOR PHOTO  40" throat TANNEWITZ VERTICAL BAND SAW, Model TR-4012-VW, Height under guide 12Ύ", Saw Blade Variable Speed: 50 thru 5230 fpm thru 4 speed gear box, POWER FEED TABLE: Size 29½" LR x 27½" FB, Table stroke adjustable thru 14Ύ", Tilts 45° right and 15° left,  Motor Drives Blade 3 hp and Table Hydraulic Pump ½ hp, Equipped with Blade Welder and Grinder, Blade Speed Indicator, Mist Coolant, Work Lights, Serial Number 94402, Mfg 1994, Photo Access doors Opened to 4-Band Wheels. Photo Access doors Opened to 4-Band Wheels.
CLICK HERE FOR PHOTO  40" throat TANNEWITZ VERTICAL BAND SAW, Model TR-4012-VW, Height under guide 12Ύ", Saw Blade Variable Speed: 50 thru 5230 fpm thru 4 speed gear box, POWER FEED TABLE: Size 29½" LR x 27½" FB, Table stroke adjustable thru 14Ύ", Tilts 45° right and 15° left,  Motor Drives Blade 3 hp and Table Hydraulic Pump ½ hp, Equipped with Blade Welder and Grinder, Blade Speed Indicator, Mist Coolant, Work Lights, Serial Number 94402, Mfg 1994, Photo Close-up Table Hydraulic Cross Feed stroke adjustment Stops and Pressure gages.
Photo Close-up Table Hydraulic Cross Feed stroke adjustment Stops and Pressure Gages.
CLICK HERE FOR PHOTO  40" throat TANNEWITZ VERTICAL BAND SAW, Model TR-4012-VW, Height under guide 12Ύ", Saw Blade Variable Speed: 50 thru 5230 fpm thru 4 speed gear box, POWER FEED TABLE: Size 29½" LR x 27½" FB, Table stroke adjustable thru 14Ύ", Tilts 45° right and 15° left,  Motor Drives Blade 3 hp and Table Hydraulic Pump ½ hp, Equipped with Blade Welder and Grinder, Blade Speed Indicator, Mist Coolant, Work Lights, Serial Number 94402, Mfg 1994, Photo Blade Welder
Photo Blade Welder and Controls.



60" throat DOALL VERTICAL BAND SAW  Model  ZV-60-26
Height under guide 13½"

Saw Blade Variable Speed: 40 thru 10,800 fpm.
     thru 3 speed gear box.
Motor Drive 10 hp.
Equipped with:
  Blade Welder and Grinder.
  Mist Coolant.     Work Lights.
 
OPTIONAL THROAT DEPTH: 26" by mounting band saw blade onto Upper & Lower Drive Wheel.
Inventory Reference S0690-10332  CLICK HERE FOR QUOTATION  60" throat DOALL VERTICAL BAND SAW, Model  ZV-60-26, height under top guide 13.5 inch, three bamd saw speed ranges, variable band speed 50 thru 10800 fpm, tilt table 30 inch sq, motor drive 10 hp, equipped with saw blade welder, Serial Number ZV-6008753  CLICK HERE FOR PHOTO  60" throat DOALL VERTICAL BAND SAW, Model  ZV-60-26, height under top guide 13.5 inch, three bamd saw speed ranges, variable band speed 50 thru 10800 fpm, tilt table 30 inch sq, motor drive 10 hp, equipped with saw blade welder, Serial Number ZV-6008753, Photo Front Photo Front Side.    CLICK HERE FOR PHOTO  60" throat DOALL VERTICAL BAND SAW, Model  ZV-60-26, height under top guide 13.5 inch, three bamd saw speed ranges, variable band speed 50 thru 10800 fpm, tilt table 30 inch sq, motor drive 10 hp, equipped with saw blade welder, Serial Number ZV-6008753, Photo Rear to Front Photo Rear to Front.
CLICK HERE FOR PHOTO  60" throat DOALL VERTICAL BAND SAW, Model  ZV-60-26, height under top guide 13.5 inch, three bamd saw speed ranges, variable band speed 50 thru 10800 fpm, tilt table 30 inch sq, motor drive 10 hp, equipped with saw blade welder, Serial Number ZV-6008753, Photo Access doors Opened to Band Wheels.
Photo Access doors Opened to Band Wheels.     CLICK HERE FOR PHOTO  60" throat DOALL VERTICAL BAND SAW, Model  ZV-60-26, height under top guide 13.5 inch, three bamd saw speed ranges, variable band speed 50 thru 10800 fpm, tilt table 30 inch sq, motor drive 10 hp, equipped with saw blade welder, Serial Number ZV-6008753, Photo Over-view both Work Tables Photo Over-view both Work Tables.





 

We now can offer "NEW" TANNEWITZ BAND SAWS:

* NEW* Tannewitz Vertical Band Saws: (
Metal Working and Woodworking)
        Throat Depth 30" thru 52"
        Single or Variable Blade Speed     5 thru 15 hp
    
*NEW* Tannewitz Band Saws: Equipped with Automatic Curve Cutter.
               
*NEW* Tannewitz Plate Saws: Band Type.
    
*NEW* Tannewitz Moving Head Plate Saws with Auto Indexing.
    
*NEW*  Tannewitz Bevel Band Saws,  Model B-11-38"
 


E-MAIL US YOUR CURRENT OR FUTURE NEEDS  at
   
sales@centurymachinery.com



SAW, CHOP, Single & Double Miter   S0860-


KALTENBACH AUTOMATIC
MITERING CIRCULAR COLD SAWING MACHINE
              Model SKL400-NA,      Serial Number 117241,     Mfg’d 1994
SPECIFICATIONS
SAW BLADE DIAMETER 15Ύ", (400 mm)
CUTTING CAPACITY at 90 degrees
     Round  5.-7/64", (130 mm)      Square 4Ύ",  (120 mm)
Wide Sections 12.40" x 1.57" Thick, (315 mm x 40 mm)
CUTTING CAPACITY AT ± 45 degrees
          Profiles Laying 5⅝" x 2⅜", (220 mm x 60 mm)   Profiles Standing 3-1/16" x 4Ύ", (80 mm x 120 mm)
CUTTING SPEEDS: Two Speed Ranges
SAW BLADE FEED, Infinitely Variable.
ADJUSTABLE CUT-OFF LENGTH Single & Double Stroke.
MATERIAL FEEDING SPEED 32.8 FPM, (10 m/min)
STOCK FEED (AUTOMATIC)
EQUIPPED WITH: Operator Control Station.
       Saw Enclosure Open & Close by Pneumatic Powered.  Operator Control Station.
       Mayfran Chip Conveyor.  Fosta Dust Collector.    Acculube Lubricant Dispenser.
Inventory Reference
S0825-10018  CLICK HERE FOR QUOTATION  kaltenbach automatic circular mitering cold sawing machine_model SKL-400 NA_capacity 5.250 inch round_square 4.75 inch_rectangle or wide section 12 inch x 1.57 inch_cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch_blade diameter 15.75 inch_two cutting speed ranges_adjustable cut off length single & double stroke 0.4 inch thru 94.488 inch_auto stock feed_adjustable back fence_adjustable pneumatic clamping_equipped withfull point of operation enclosure_mayfram chip tote conveyor_fosta dust collection system_acculube lubricant dispenser_mfg 1994_Serial Number 117241_EXCELLENT CONDITION
CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Front view with point of operation enclosure closed
Photo Front view with point of operation enclosure closed.      CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Point of Operation Enclosure Open Right Side to Front view Photo Point of Operation Enclosure Open Right Side to Front view.
          CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Front lower access doors open. Front lower access doors open.        CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Front lower access doors open. Photo Left Side to Front view with point of operation hood open.
CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Close-up point of operation.
Photo Close-up point of operation.      CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Close-up Part in-feed carriage  Photo Close-up Part in-feed carriage.      CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Close-up point of operation. Photo Close-up point of operation.
         CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Close-up feed adjustment.
Photo Close-up feed adjustment.     CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View in-feed end towards Part Carriage. Photo View in-feed end towards Part Carriage.    CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View Pneumatic Valves & Controls. Photo View Pneumatic Valves & Controls.
CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View inside of Electrical Controls Cabinet.
Photo View inside of Electrical Controls Cabinet.    CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View of Over-All Saw from Right End to Front. Photo View of Over-All Saw from Right End to Front.
        CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View of Over-All Saw from Left End to Front.
Photo View of Over-All Saw from Left End to Front.      CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View of Over-All Saw from Right End. Photo View of Over-All Saw from Right End.
CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Fosta Dust Collector. Photo
Fosta Dust Collector.     CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Mayfran Chip Tote Conveyor. Photo Mayfran Chip Tote Conveyor.     CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Mfg. ID Tag. Photo Mfg. ID Tag.




SAWS, RADIAL ARM 


DELTA ROCKWELL
RADIAL ARM SAW
   16" Diameter Blade Capacity

Cross Rip 14"
Out Rip 34"
Motor drive 5 hp
Equipped with Dato Blades
Inventory Reference
S1203-9515  CLICK HERE FOR QUOTATION  16 inch diameter blade delta rockwell radial arm saw, motor drive 5 hp, cross rip 14 inch, outrip 34 inch, with one saw blade and dato set, Serial Number BS8907



DEWALT RADIAL ARM SAW  Model GE
   16" Diameter Blade Capacity

Cross Rip 24"
Out Rip 38"
Motor drive 7
½ hp
Equipped with:
  one16" diameter carbide tip saw blade.
Inventory Reference S1203-10238  CLICK HERE FOR QUOTATION  16 inch diameter blade dewalt radial arm saw, capacity blade 16 inch diameter model GE, motor drive 7.5 hp, cross rip 24 inch, out rip 38 inch, with one 16 inch diameter carbide tip saw blade, Serial Number 114721

 

 

DeWALT RADIAL ARM SAW with Power Cross Feed
 
18" Diameter Blade Capacity
Miter at 45 degrees RIGHT & LEFT
Out Rip 38"
Cross Rip 13"
SAW BLADE MOTOR CROSS FEED  Power Feed
      Vari Feed Rate.  Adjustable saw carriage stops.
MOTOR DRIVE. 7½ hp.208-220/440 volts
Cross Cut Feed Motor DC volts
OPERATOR CONTROLS mounted on front of arm
EQUIPPED WITH:
       1-Saw Blade carbide tipped.

Inventory Reference S1203-4037-10224  CLICK HERE FOR QUOTATION  18 inch diameter blade DeWALT RADIAL ARM SAW with Power Cross Feed, Miter at 45 degrees RIGHT & LEFT, Out Rip 38", Cross Rip 13", SAW BLADE MOTOR CROSS FEED  Power Feed Vari Feed Rate.  Adjustable saw carriage stops, MOTOR DRIVE 7½ hp, Cross Cut Feed Motor DC volts, OPERATOR CONTROLS mounted on front of arm, EQUIPPED WITH 1-Saw Blade carbide tipped, RADIAL SAW IS MOUNTED ON BED FRAME and is equipped with independent  Pneumatic Part In-Feed Shuttle with clamping. Radial Arm Saw and  Columns are attached to bed frame and can adjust longitudinally with-in guiderails,Distance between saws 103





SAW, PANEL " CNC"   S1098-


CHALLONER MEDALIST HORIZONTAL CNC SHEET PANEL SAW
Capacity Sheet 10½ feet

Blade Diameter 16"
Equipped with Part Infeed and Outfeed
    Air Sheet Lift Tables
"Very Little Use"
Inventory ReferenceS1098-7036  CLICK HERE FOR QUOTATION  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340  CLICK HERE FOR PHOTO  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340_Front View Saw Front View        
Left to Right View Saw  CLICK HERE FOR PHOTO  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340_Left to Right Front View        CLICK HERE FOR PHOTO  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340_End View Close up Eagle Eye(2 photo) 2-Photo's Side View Saw & Close Up Eagle Eye Safety Curtain
CLICK HERE FOR PHOTO  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340_CNC Controls CNC Control              Feed Unite & Table  CLICK HERE FOR PHOTO  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340_Feed Table (2 photos)
CLICK HERE FOR PHOTO  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340_(3) Air Lift Tables 3-Air Lift Tables        2-Roller Tables  CLICK HERE FOR PHOTO  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340_(2) Roller Tables

 

 

 

SAWS, SCROLL (Jig Saws)  S1018-

OLIVER SCROLL SAW, JIG SAW, Model 273-D
    Throat Depth 36"
    Height Under Guide 10"
    Table  Size 34" x 34",  Tilts Right & left 30 degrees
Motor Drive 2 hp. 230/460 volts
Inventory Reference S1018-9253 CLICK HERE FOR QUOTATION  oliver scroll jig saw_model 273-D_throat depth 36 inch_hieght under guide 10 inch_tilting table 34 inch x 34 inch and tilts 30 degrees left and right_motor drive 2 hp_with air pump_Serial Number 206157 
CLICK HERE FOR PHOTO   36 inch throat depth oliver scroll jig saw, model 273-D, hieght under blade guide 10 inch, tilting table 34 inch x 34 inch and tilts 30 degrees left and right, motor drive 2 hp, with air pump, Serial Number 206157
Photo
Very Nice running scroll saw
 WE NEED SPACE and we have discounted our price to $2,350.00

 


For quotes,  Please;
    Call: 1-213-627-2847
    Fax:  1- 213-627-2499
    or E-mail us at sales@centurymachinery.com





SAWS, TABLE   S1402-


OLIVER TILTING ARBOR TABLE SAW   Model 232-D
     Blade Diameter up to 14"
Capacity:
    Blade projects
2⅜"
    Width to cut on:
                              Left side of blade (In-front) 15½
"
                              Right side of blade (To rear) 46
"
3 hp  direct motor drive to blade
Bed Over-all Size
33Ύ" x 34⅝"
Bed Extension for Peg Rip Fence 29½
"
length
Equipped with:
 1-Over head Swing Down Blade Guard.
 1-Oliver Rip Fence (Peg Type)
 1-Miter Gauge.
 1- Carbide Tip Saw Blade

Inventory Reference S1402-10382  CLICK HERE FOR QUOTATION  oliver tilting arbor table saw, model 232-D, capacity blade 14 inch, capacity width to cut in front of blade 15.5 inch and at rear of blade 46 inch,motor direct drive 3 hp, with peg rip fence, miter gage, blade guard with anti kick back, Serial Number 97544
 WE NEED SPACE and we have discounted our price to $2,250.00





THREE IN STOCK
▼            ▼          ▼
OLIVER TILTING ARBOR Rolling Top TABLE SAW   Model 88-D
     Blade Diameter up to 18"
Capacity:
    Blade projects 4Ύ
"
    Width to cut on:
                              Left side of blade (In-front) 17
"
                              Right side of blade (To rear) 52
"
    Cross Cut 32
"
5 hp  direct motor drive to blade
ROLLING TOP TABLE 17½
"
x 44½"
Bed Over-all Size
41
½" x 44½"
Bed Extension for Peg Rip Fence 36
"
length x 21⅝"
Equipped with:
 1-Over head Swing Down Blade Guard.
 1-Oliver Rip Fence (Peg Type)
 1-Miter Gauge.
 1- Saw Blade

Inventory Reference S1402-10378  CLICK HERE FOR QUOTATION  oliver rolling top tilting arbor table saw, model 88-D, capacity blade 18" x 4.75" projects, capacity width to cut in front of blade 17" and at rear of blade 52",roll top table 17.5" wide direct drive 5 hp motor, with peg rip fence, miter gage, blade guard with anti kick back, Serial Number 96445
Inventory Reference S1402-10379  CLICK HERE FOR QUOTATION  oliver rolling top tilting arbor table saw, model 88-D, capacity blade 18" x 4.75" projects, capacity width to cut in front of blade 17" and at rear of blade 52",roll top table 17.5" wide direct drive 5 hp motor, with peg rip fence, miter gage, blade guard with anti kick back, Serial Number 66430
 WE NEED SPACE and we have discounted our price to $2,950.00 each


 

Several In Stock
TABLE SAW RIP FENCES, Peg Type
FITS Oliver Table Saws and Tannewitz Table Saw

FOR QUOTES
Call 1-213-627-2847
Email sales@centurymachinery.com



"NEW" Powermatic Tilting Arbor Saws

     
10" Blade Model 64A 1½ hp, 115/230 volts. 
Inventory Reference 1791227

      10" Blade Model 66,  5 hp, 1-phase 
Inventory Reference1660793 or
                3-Phase 
Inventory  Reference1880750
                3 hp. 1-phase 
Inventory Reference1660760

      14" Blade Model 72A, 7½ hp, 3-phase 
Inventory Reference 1720294
                                               5 hp. 1-phase  
Inventory Reference 1720295

      14" Scoring Blade Model 74A,  7½ hp, 3-phase 
Inventory Reference 1740150
                                                                5 hp, 1- phase  
Inventory Reference 1740152
   "On all the above Powermatic Saw REQUEST LIST OF OPTIONS."








SHAPERS, "All Type" 

INVENTORY REDUCTION SALE PRICE on all the following items
                                                        

COMASCO INVERTED VERTICAL SPINDLE SHAPER

    Spindle Collet capacity 3/4" diameter
    Spindle Speed 8,000 rpm
    Table Size 35" x 70"
    Spindle Drive Motor 5 hp
Equipped with:
    Over head tracer pin
 Inventory Reference  S3053-5359 
CLICK HERE FOR QUOTATION  comasco vertical spindle shaper and router_spindle speed 8000 rpm_collet capacity 0.75 inch diameter_over-head pin guide_table 35.5 inch x 70 inch_motor drive 5 hp
 WE NEED SPACE and we have discounted our price to $1,850.00 each



JJ SMITH VERTICAL SHAPER, Model  382,  Type SP
Spindle Arbor
"  diameter

Table 32½" x 35½"
Spindle Speed 7,200 rpm   
Spindle is driven by 4 hp. motor   
Equipped with
  
Holzher  3- wheel Power Feeder, Type ETZ, two Speed Motor.
I
nventory Reference S3004-10376  vertical spindle shaper, jj smith, model 382, type SP, spindle 1.25 inch, drive 4 hp, table 32.5 x 35.5, 4 hp, Serial 12738, w-holzher feeder, Serial 23412    vertical spindle shaper, jj smith, model 382, type SP, spindle 1.25 inch, drive 4 hp, table 32.5 x 35.5, 4 hp, Serial 12738, w-holzher feeder, Serial 23412, Photo Front view Photo Front view.
      vertical spindle shaper, jj smith, model 382, type SP, spindle 1.25 inch, drive 4 hp, table 32.5 x 35.5, 4 hp, Serial 12738, w-holzher feeder, Serial 23412, Photo down view Front Photo Down view Front.     vertical spindle shaper, jj smith, model 382, type SP, spindle 1.25 inch, drive 4 hp, table 32.5 x 35.5, 4 hp, Serial 12738, w-holzher feeder, Serial 23412, Photo Left side to Front Photo Left Side to Front.
vertical spindle shaper, jj smith, model 382, type SP, spindle 1.25 inch, drive 4 hp, table 32.5 x 35.5, 4 hp, Serial 12738, w-holzher feeder, Serial 23412, Photo Rear view Photo Rear view.
 WE NEED SPACE and we have discounted our price to $2,050.00 each




OLIVER VERTICAL SHAPERS and ROUTERS
   (Re-Built)


One SPINDLE
          

OLIVER VERTICAL SHAPER   Model 287-T
Table 48" x 96"
Spindle Speed 7,200 rpm    Spindle Drive Motor 7
½ hp.
Equipped with Collet Chuck and 1" diameter Spindle Shaft
Inventory Reference S3053-6722 CLICK HERE FOR QUOTATION  oliver vertical shaper, model 287-T, spindle speed 7200 rpm, motor drive 7.5 hp, shaper spindle 1 inch dia, collet capacity 1 inch diameter, table size 48 inch x 96 inch, Serial Number 82050  CLICK HERE FOR PHOTO  oliver vertical shaper, model 287-T, spindle speed 7200 rpm, motor drive 7.5 hp, shaper spindle 1 inch dia, collet capacity 1 inch diameter, table size 48 inch x 96 inch, Serial Number 82050, rebuilt for boeing commercial aviation Photo
 WE NEED SPACE and we have discounted our price to $2,850.00




Two SPINDLES

OLIVER VERTICAL SHAPER, Model  288-T
two  SPINDLES each 1Ό" diameter
SPINDLE SPEED 7,200 rpm   
   each Spindle is driven by 5 hp. motor
TABLE 36" x 65½"
Equipped with
   Spindle Shaft and Collet Chuck
I
nventory Reference S3004-10068 CLICK HERE FOR QUOTATION  oliver two vertical shaper-router, model 287-T, spindle diameter 1", each spindle vertical adjustment  4½" by hand crank, each spindle 7200 rpm, table size 36" x 65.5", each spindle is driven by 5 hp motor, equipped with foot brake with electric current shut off_Serial Number 64192
 WE NEED SPACE and we have discounted our price to $2,850.00 each
 


 

Please Note: These photo's show re-built units to be used as an example of our finished product.
Oliver 287 Shapers
 
Inventory Reference 6722  CLICK HERE FOR PHOTO oliver vertical shaper_model 287-T_spindle speed 7200 rpm_motor drive 7.5 hp_collet capacity 1 inch diameter_vertical spindle adjustment 4.5 inch_table size 48 inch x 96 inch_rebuilt for boeing commercial aviation Photo
Orton Tilting Spindle Shapers,  Model E 
Inventory Reference 6609  CLICK HERE FOR PHOTO   orton tilting spindle shaper_model E rebuilt for lockheedPhoto and 6748 CLICK HERE FOR PHOTO  orton tilting spindle shaper_model E_spindle speed 10,000 rpm_new DC speed brake_complete rebuilt for boeing comercial aviation Photo
Orton Shaper -  Router, Model EOA 
Inventory Reference 5815


ONSRUD INVERTED SPINDLE SHAPERS and ROUTERS (Rebuilt)
                                                                                     


ONSRUD VERTICAL SHAPER ROUTER  Model A69   Tilting Spindle
Table Size 44" x 72⅜"
Spindle Speed 10,200 rpm     Spindle Drive Motor 5 hp
Coolant Pump
Inventory Reference S3053-5358  CLICK HERE FOR QUOTATION  onsrud tilting spindle shaper router_model A69_collet capacity 1 inch_spindle speed 10200 rpm_vertical spindle adjustment 2.5 inch_drive 5 hp_table 44 inch x 72 inch_coolant_frequency type_Serial Number 6296
 WE NEED SPACE and we have discounted our price to $1,750.00 each



ONSRUD VERTICAL SHAPER ROUTER  Model A69   Tilting Spindle
Table Size 44" x 72"
Spindle Speed 10,200 rpm     Spindle Drive Motor 7
½ hp, 180 cycles
Frequency Converter 15 hp
Inventory Reference S3053-4039  CLICK HERE FOR QUOTATION  onsrud tilting spindle shaper router_model A69_collet capacity 1 inch_spindle speed 10200 rpm_vertical spindle adjustment 2.5 inch_direct spindle drive 7.5 hp_table 44 inch x 72 inch_coolant_frequency converter drive 15 hp_Serial Number 2815-2SF-1
 WE NEED SPACE and we have discounted our price to $1,850.00 each




C.R. ONSRUD INVERTED SPINDLE ROUTERS
C.R. ONSRUD VERTICAL ROUTER  Model 00210
Table Size 28.5" x 43.5"
Variable Spindle Speeds 12,000 thru 21,000 rpm.
Spindle Drive Motor 10 hp
Collet Capacity thru 3/4"
CONDITION Like New
Equipped with 1/4",  3/8", 1/2", and 3/4" Collets and Collet Nuts.
    (18) Off-set Guides Insets.   (1) Extra Table Open Insert.
Inventory Reference R8903-S3053-19647 
CLICK HERE FOR QUOTATION  CR. ONSRUD INVERTED ROUTER_model 200210_CAPACITY SPINDLE acura flex collet thru 3/4"_plunge vertical - variable adjustment thru 3” by adjustment dial_pneumatically_ SPINDLE SPEED electronic variable speed ranges 12,500 thru 25,000 rpm_THROAT DEPTH front of table offset to center of spindle 13½"_TABLE SIZE: 43½" LR x 31½" FB_SPINDLE MOTOR DRIVE 10 hp_operators controls litetek warning light_start - stop buttons_plunge speed adjustment dial_spindle speed adjustment dial_RPM meter 0 – 12500 & 0 – 25000_motor percent load meter _drive belt tension on / off switch_low spindle oil warning light_current hour run meter_magnetek GPD 515 solid state speed control_remote start / stop buttons located under table, front right side_ spray mist lubricator control switch located under table, front left side_spindle up / down foot switch_ both access doors equipment with electrical power shut off switches_EQUIPPED WITH spindle lubrication by norgren combo unit set at 20 psi - 10 drops per minute_spray master lubricator system with magnetic base spray nozzle holder_(1) Ύ” collet and nut_(1) ½” collet and nut_(1) Ό” collet and nut_(1) 3/8” collet and nut_(2) table insert open_(1) table Insert for off-set guides_dust collection outlet 4” (100 mm)_(2) eye safety shields with magnetic base_built-in fork lift tubes_Date Mfg. 2001
CLICK HERE FOR PHOTO   CR. ONSRUD INVERTED ROUTER_model 200210_CAPACITY SPINDLE acura flex collet thru 3/4"_plunge vertical - variable adjustment thru 3” by adjustment dial_pneumatically_ SPINDLE SPEED electronic variable speed ranges 12,500 thru 25,000 rpm_THROAT DEPTH front of table offset to center of spindle 13½"_TABLE SIZE: 43½" LR x 31½" FB_SPINDLE MOTOR DRIVE 10 hp_operators controls litetek warning light_start - stop buttons_plunge speed adjustment dial_spindle speed adjustment dial_RPM meter 0 – 12500 & 0 – 25000_motor percent load meter _drive belt tension on / off switch_low spindle oil warning light_current hour run meter_magnetek GPD 515 solid state speed control_remote start / stop buttons located under table, front right side_ spray mist lubricator control switch located under table, front left side_spindle up / down foot switch_ both access doors equipment with electrical power shut off switches_EQUIPPED WITH spindle lubrication by norgren combo unit set at 20 psi - 10 drops per minute_spray master lubricator system with magnetic base spray nozzle holder_(1) Ύ” collet and nut_(1) ½” collet and nut_(1) Ό” collet and nut_(1) 3/8” collet and nut_(2) table insert open_(1) table Insert for off-set guides_dust collection outlet 4” (100 mm)_(2) eye safety shields with magnetic base_built-in fork lift tubes_Date Mfg. 2001_Left to Front View
Photo Front view.    CLICK HERE FOR PHOTO   CR. ONSRUD INVERTED ROUTER_model 200210_CAPACITY SPINDLE acura flex collet thru 3/4"_plunge vertical - variable adjustment thru 3” by adjustment dial_pneumatically_ SPINDLE SPEED electronic variable speed ranges 12,500 thru 25,000 rpm_THROAT DEPTH front of table offset to center of spindle 13½"_TABLE SIZE: 43½" LR x 31½" FB_SPINDLE MOTOR DRIVE 10 hp_operators controls litetek warning light_start - stop buttons_plunge speed adjustment dial_spindle speed adjustment dial_RPM meter 0 – 12500 & 0 – 25000_motor percent load meter _drive belt tension on / off switch_low spindle oil warning light_current hour run meter_magnetek GPD 515 solid state speed control_remote start / stop buttons located under table, front right side_ spray mist lubricator control switch located under table, front left side_spindle up / down foot switch_ both access doors equipment with electrical power shut off switches_EQUIPPED WITH spindle lubrication by norgren combo unit set at 20 psi - 10 drops per minute_spray master lubricator system with magnetic base spray nozzle holder_(1) Ύ” collet and nut_(1) ½” collet and nut_(1) Ό” collet and nut_(1) 3/8” collet and nut_(2) table insert open_(1) table Insert for off-set guides_dust collection outlet 4” (100 mm)_(2) eye safety shields with magnetic base_built-in fork lift tubes_Date Mfg. 2001_Right side view Photo Right side view.    CLICK HERE FOR PHOTO  CR. ONSRUD INVERTED ROUTER_model 200210_CAPACITY SPINDLE acura flex collet thru 3/4"_plunge vertical - variable adjustment thru 3” by adjustment dial_pneumatically_ SPINDLE SPEED electronic variable speed ranges 12,500 thru 25,000 rpm_THROAT DEPTH front of table offset to center of spindle 13½"_TABLE SIZE: 43½" LR x 31½" FB_SPINDLE MOTOR DRIVE 10 hp_operators controls litetek warning light_start - stop buttons_plunge speed adjustment dial_spindle speed adjustment dial_RPM meter 0 – 12500 & 0 – 25000_motor percent load meter _drive belt tension on / off switch_low spindle oil warning light_current hour run meter_magnetek GPD 515 solid state speed control_remote start / stop buttons located under table, front right side_ spray mist lubricator control switch located under table, front left side_spindle up / down foot switch_ both access doors equipment with electrical power shut off switches_EQUIPPED WITH spindle lubrication by norgren combo unit set at 20 psi - 10 drops per minute_spray master lubricator system with magnetic base spray nozzle holder_(1) Ύ” collet and nut_(1) ½” collet and nut_(1) Ό” collet and nut_(1) 3/8” collet and nut_(2) table insert open_(1) table Insert for off-set guides_dust collection outlet 4” (100 mm)_(2) eye safety shields with magnetic base_built-in fork lift tubes_Date Mfg. 2001_Close up inside view spindle and Controls Photo View Spindle and controls.
CLICK HERE FOR PHOTO   CR. ONSRUD INVERTED ROUTER_model 200210_CAPACITY SPINDLE acura flex collet thru 3/4"_plunge vertical - variable adjustment thru 3” by adjustment dial_pneumatically_ SPINDLE SPEED electronic variable speed ranges 12,500 thru 25,000 rpm_THROAT DEPTH front of table offset to center of spindle 13½"_TABLE SIZE: 43½" LR x 31½" FB_SPINDLE MOTOR DRIVE 10 hp_operators controls litetek warning light_start - stop buttons_plunge speed adjustment dial_spindle speed adjustment dial_RPM meter 0 – 12500 & 0 – 25000_motor percent load meter _drive belt tension on / off switch_low spindle oil warning light_current hour run meter_magnetek GPD 515 solid state speed control_remote start / stop buttons located under table, front right side_ spray mist lubricator control switch located under table, front left side_spindle up / down foot switch_ both access doors equipment with electrical power shut off switches_EQUIPPED WITH spindle lubrication by norgren combo unit set at 20 psi - 10 drops per minute_spray master lubricator system with magnetic base spray nozzle holder_(1) Ύ” collet and nut_(1) ½” collet and nut_(1) Ό” collet and nut_(1) 3/8” collet and nut_(2) table insert open_(1) table Insert for off-set guides_dust collection outlet 4” (100 mm)_(2) eye safety shields with magnetic base_built-in fork lift tubes_Date Mfg. 2001_Close up Operator Control Panel 
Photo Close up Operator Control Panel.    CLICK HERE FOR PHOTO  CR. ONSRUD INVERTED ROUTER_model 200210_CAPACITY SPINDLE acura flex collet thru 3/4"_plunge vertical - variable adjustment thru 3” by adjustment dial_pneumatically_ SPINDLE SPEED electronic variable speed ranges 12,500 thru 25,000 rpm_THROAT DEPTH front of table offset to center of spindle 13½"_TABLE SIZE: 43½" LR x 31½" FB_SPINDLE MOTOR DRIVE 10 hp_operators controls litetek warning light_start - stop buttons_plunge speed adjustment dial_spindle speed adjustment dial_RPM meter 0 – 12500 & 0 – 25000_motor percent load meter _drive belt tension on / off switch_low spindle oil warning light_current hour run meter_magnetek GPD 515 solid state speed control_remote start / stop buttons located under table, front right side_ spray mist lubricator control switch located under table, front left side_spindle up / down foot switch_ both access doors equipment with electrical power shut off switches_EQUIPPED WITH spindle lubrication by norgren combo unit set at 20 psi - 10 drops per minute_spray master lubricator system with magnetic base spray nozzle holder_(1) Ύ” collet and nut_(1) ½” collet and nut_(1) Ό” collet and nut_(1) 3/8” collet and nut_(2) table insert open_(1) table Insert for off-set guides_dust collection outlet 4” (100 mm)_(2) eye safety shields with magnetic base_built-in fork lift tubes_Date Mfg. 2001_Right side to Rear View_Spray Mist Lube Photo Right side to Rear View Spray Mist Lube.
CLICK HERE FOR PHOTO   CR. ONSRUD INVERTED ROUTER_model 200210_CAPACITY SPINDLE acura flex collet thru 3/4"_plunge vertical - variable adjustment thru 3” by adjustment dial_pneumatically_ SPINDLE SPEED electronic variable speed ranges 12,500 thru 25,000 rpm_THROAT DEPTH front of table offset to center of spindle 13½"_TABLE SIZE: 43½" LR x 31½" FB_SPINDLE MOTOR DRIVE 10 hp_operators controls litetek warning light_start - stop buttons_plunge speed adjustment dial_spindle speed adjustment dial_RPM meter 0 – 12500 & 0 – 25000_motor percent load meter _drive belt tension on / off switch_low spindle oil warning light_current hour run meter_magnetek GPD 515 solid state speed control_remote start / stop buttons located under table, front right side_ spray mist lubricator control switch located under table, front left side_spindle up / down foot switch_ both access doors equipment with electrical power shut off switches_EQUIPPED WITH spindle lubrication by norgren combo unit set at 20 psi - 10 drops per minute_spray master lubricator system with magnetic base spray nozzle holder_(1) Ύ” collet and nut_(1) ½” collet and nut_(1) Ό” collet and nut_(1) 3/8” collet and nut_(2) table insert open_(1) table Insert for off-set guides_dust collection outlet 4” (100 mm)_(2) eye safety shields with magnetic base_built-in fork lift tubes_Date Mfg. 2001_Motor access door open
Photo Motor access door open.  CLICK HERE FOR PHOTO   CR. ONSRUD INVERTED ROUTER_model 200210_CAPACITY SPINDLE acura flex collet thru 3/4"_plunge vertical - variable adjustment thru 3” by adjustment dial_pneumatically_ SPINDLE SPEED electronic variable speed ranges 12,500 thru 25,000 rpm_THROAT DEPTH front of table offset to center of spindle 13½"_TABLE SIZE: 43½" LR x 31½" FB_SPINDLE MOTOR DRIVE 10 hp_operators controls litetek warning light_start - stop buttons_plunge speed adjustment dial_spindle speed adjustment dial_RPM meter 0 – 12500 & 0 – 25000_motor percent load meter _drive belt tension on / off switch_low spindle oil warning light_current hour run meter_magnetek GPD 515 solid state speed control_remote start / stop buttons located under table, front right side_ spray mist lubricator control switch located under table, front left side_spindle up / down foot switch_ both access doors equipment with electrical power shut off switches_EQUIPPED WITH spindle lubrication by norgren combo unit set at 20 psi - 10 drops per minute_spray master lubricator system with magnetic base spray nozzle holder_(1) Ύ” collet and nut_(1) ½” collet and nut_(1) Ό” collet and nut_(1) 3/8” collet and nut_(2) table insert open_(1) table Insert for off-set guides_dust collection outlet 4” (100 mm)_(2) eye safety shields with magnetic base_built-in fork lift tubes_Date Mfg. 2001_Close up drive motor Photo Close up drive motor.
CLICK HERE FOR PHOTO   CR. ONSRUD INVERTED ROUTER_model 200210_CAPACITY SPINDLE acura flex collet thru 3/4"_plunge vertical - variable adjustment thru 3” by adjustment dial_pneumatically_ SPINDLE SPEED electronic variable speed ranges 12,500 thru 25,000 rpm_THROAT DEPTH front of table offset to center of spindle 13½"_TABLE SIZE: 43½" LR x 31½" FB_SPINDLE MOTOR DRIVE 10 hp_operators controls litetek warning light_start - stop buttons_plunge speed adjustment dial_spindle speed adjustment dial_RPM meter 0 – 12500 & 0 – 25000_motor percent load meter _drive belt tension on / off switch_low spindle oil warning light_current hour run meter_magnetek GPD 515 solid state speed control_remote start / stop buttons located under table, front right side_ spray mist lubricator control switch located under table, front left side_spindle up / down foot switch_ both access doors equipment with electrical power shut off switches_EQUIPPED WITH spindle lubrication by norgren combo unit set at 20 psi - 10 drops per minute_spray master lubricator system with magnetic base spray nozzle holder_(1) Ύ” collet and nut_(1) ½” collet and nut_(1) Ό” collet and nut_(1) 3/8” collet and nut_(2) table insert open_(1) table Insert for off-set guides_dust collection outlet 4” (100 mm)_(2) eye safety shields with magnetic base_built-in fork lift tubes_Date Mfg. 2001_Close Up Safety Shield - Mist Lube 
Photo Close Up Safety Shield - Mist Lube.
 WE NEED SPACE and we have discounted our price to $7,850.00




ORTON  INVERTED SPINDLE Tilting Spindle SHAPERS and ROUTERS (Re-Built)
R8903-     S3053-

▼    ▼    ▼     ▼

ORTON INVERTED SPINDLE SHAPER ROUTER   M
odel E   Tilting Spindle
Spindle Tilts thru 45 degrees.
Table Size 40" x 60"
Spindle Speed 10,000 rpm     Spindle drive 5 hp
I
nventory Reference
S3053-16608 CLICK HERE FOR QUOTATION  orton vertical tilting spindle shaper_model E_spindle speed 10000 rpm_spindle tilt thru 45 degrees_belted spindle drive 5 hp_equipped with New spindle collet chuck_Serial Number 26865-29_rebuilt   CLICK HERE FOR PHOTO  orton vertical tilting spindle shaper_model E_spindle speed 10000 rpm_spindle tilt thru 45 degrees_belted spindle drive 5 hp_equipped with New spindle collet chuck_Serial Number 26865-29_rebuilt Photo
 WE NEED SPACE and we have discounted our price to $ CALL



THESE SHAPERS REBUILT FOR:
Inventory Reference 6609 ORTON Tilting Spindle SHAPER ROUTER, Model E
                  
Re-built for Lockheed.    CLICK HERE FOR PHOTO   orton tilting spindle shaper_model E_Rebuilt for Lockheed
Photo
Inventory Reference 6748 ORTON Tilting Spindle SHAPER ROUTER, Model E
                  
Re-built for Boeing   CLICK HERE FOR PHOTO  orton tilting spindle shaper_model E_spindle speed 10000 rpm_new DC speed brake_complete rebuilt for boeing comercial aviation
Photo

      ORTON INVERTED SPINDLE SHAPER ROUTER     Model F    Tilting Spindle
                                                
REBUILT 2007

                                         "LOADED WITH EVERY OPTION"
      
*Variable Spindle Speed thru 10,000 rpm                 *Power Spindle Tilting
      
*Power Part Feeder                                         *Operator Vacuum Part Holder
      
*Digital Spindle Degree Indicator               *DC Spindle Motor Brake
      
*Table Size 30" x 60"                                 *Collet Type Tool Holder 1" Capacity
      
*Micro-mist Spindle Bearing Lube System
       New Cost $59,750.00                                 Our Rebuilt Price $25,000.00  
 $pecial iscounted our price to $18,500.00

   
                 
CLICK HERE FOR QUOTATION  orton vertical tilting spindle shaper router_model F_power tilting spindle_spindle tilts from 90 degree 45 degrees under_power stock feed_spindle speed 10000 rpm_spindle drive  5 - 10 hp_Serial Number F-93-514962    Inventory Reference S3053-18414         CLICK HERE FOR PHOTO orton vertical tilting spindle shaper router_model F_power tilting spindle_spindle tilts from 90 degree 45 degrees under_power stock feed_spindle speed 10000 rpm_spindle drive  5 - 10 hp_Serial Number F-93-514962 Photo Front View      CLICK HERE FOR PHOTO  orton vertical tilting spindle shaper router_model F_power tilting spindle_spindle tilts from 90 degree 45 degrees under_power stock feed_spindle speed 10000 rpm_spindle drive  5 - 10 hp_Serial Number F-93-514962_Rear View Photo Rear View         CLICK HERE FOR PHOTO  orton vertical tilting spindle shaper router_model F_power tilting spindle_spindle tilts from 90 degree 45 degrees under_power stock feed_spindle speed 10000 rpm_spindle drive  5 - 10 hp_Serial Number F-93-514962_solid state spindle speed control Photo Solid State Spindle Speed Control


TWO IN-STOCK
▼▼
ORTON  Inverted
Tilting Spindle SHAPER ROUTER     Model F
     
Spindle Speed thru 10,000 rpm
      Spindle Tilts from 90 degrees, and unit adjusts 45 degrees Under to 30 degrees Outward.
      Collet Type Tool Holder 1" Capacity
      Table Size 30" x 60"
      Offset Guide Pin adjust up and down
Equipped with   Power Spindle Tilting   -   Power Part Feeder
Operator Vacuum Part Holder   -     Digital Spindle Degree Indicator
DC Spindle Motor Brake     -      Micro-mist Spindle Bearing Lube System
Inventory Reference S3053-5360  CLICK HERE FOR QUOTATION  orton tilting spindle shaper router_model F_spindle tilts 90 degrees thru 45 degrees under to 30 degrees outward_spindle 10000 rpm_collet 1 inch_10 hp_table 30 inch x 60 inch_ power tilting spindle_part holder by vacumm _frequency converter 15 hp_Serial Number F-58-37997
Inventory Reference S3053-5703 
CLICK HERE FOR QUOTATION  orton tilting spindle shaper router_model F_spindle tilts 90 degrees thru 45 degrees under to 30 degrees outward_spindle 10000 rpm_collet 1 inch_10 hp_table 30 inch x 60 inch_ power tilting spindle_part holder by vacumm _frequency converter 15 hp_Serial Number F63-38473
Please see above Orton F in box for finish.
 WE NEED SPACE and we have discounted our price to CALL




THREE IN-STOCK
▼▼▼
ORTON  Inverted
Tilting Spindle SHAPER ROUTER    Model F
    Spindle Speed 10,000 rpm.
   
Spindle Tilts from 90 degrees, and unit adjusts 45 degrees Under to 30 degrees Outward.
    Spindle Drive
Motor 7½
   
Collet Type Tool Holder 1" Capacity
    Table Size 30" x 60⅝"
   
Offset Guide Pin adjust up and down
    Vertical Height Adjustment and Tilting Manually

Inventory Reference S3053-8714 
CLICK HERE FOR QUOTATION  orton tilting spindle shaper router_model F_spindle tilts 90 degrees vertical thru 45 degrees under to 30 degrees outward_spindle speed 10000 rpm_collet capacity 1 inch_spindle drive 7.5 hp_table size 30 inch x 60 inch_Serial Number F102-54816 CLICK HERE FOR PHOTO orton tilting spindle shaper router_model F_spindle tilts 90 degrees vertical thru 45 degrees under to 30 degrees outward_spindle speed 10000 rpm_collet capacity 1 inch_spindle drive 7.5 hp_table size 30 inch x 60 inch Photo This unit Rebuilt.
 WE NEED SPACE and we have discounted our price to CALL
 


 

            ORTON  Inverted Tilting Spindle SHAPER ROUTER    Model F
                 Spindle Speed 10,000 rpm.
   
             Spindle Tilts from 90 degrees, and unit adjusts 45 degrees Under to 30 degrees Outward.
                 Spindle Drive
Motor 7½
   
             Collet Type Tool Holder 1" Capacity
                 Table Size 30" x 60⅝"
   
            Offset Guide Pin adjust up and down
                Vertical Height Adjustment and Tilting Manually
           Inventory Reference S3053-6682  CLICK HERE FOR QUOTATION  orton tilting spindle shaper router_ model F_spindle tilts 90 degrees vertical thru 45 degrees under to 30 degrees outward_spindle speed 10000 rpm_collet capacity 1 inch diameter shank_ spindle drive 7.5 hp_table size 30 inch x 60 inch
          
Photos SHOWING 11 Brown & Sharpe Spindle
           ▼▼▼
    
CLICK HERE FOR PHOTO  orton tilting spindle shaper router, model F, spindle tilts 90 degrees vertical thru 45 degrees under to 30 degrees outward, spindle speed 10000 rpm, collet capacity 1 inch diameter shank, spindle drive 7.5 hp, table size 30 inch x 60 inch, Serial Number F-72-3999, Over-all view  Photo Over-all view.   CLICK HERE FOR PHOTO orton tilting spindle shaper router, model F, spindle tilts 90 degrees vertical thru 45 degrees under to 30 degrees outward, spindle speed 10000 rpm, collet capacity 1 inch diameter shank, spindle drive 7.5 hp, table size 30 inch x 60 inch, Serial Number F-72-3999, Close-up Spindle Out-board holder & Tilting adjustment   Photo Close-up Spindle & Tilting adjustment.      CLICK HERE FOR PHOTO orton tilting spindle shaper router, model F, spindle tilts 90 degrees vertical thru 45 degrees under to 30 degrees outward, spindle speed 10000 rpm, collet capacity 1 inch diameter shank, spindle drive 7.5 hp, table size 30 inch x 60 inch, Serial Number F-72-3999, Photo Under table view Spindle Collet Chuck   Photo Under table view Spindle Collet Chuck.
    
CLICK HERE FOR PHOTO  orton tilting spindle shaper router, model F, spindle tilts 90 degrees vertical thru 45 degrees under to 30 degrees outward, spindle speed 10000 rpm, collet capacity 1 inch diameter shank, spindle drive 7.5 hp, table size 30 inch x 60 inch, Serial Number F-72-3999, Photo Close-up Spindle Out-board holder & Tilting adjustment   Photo Close-up Spindle taken out showing, one 11 Taper Brown & Sharp Collet Chuck, one 1" capacity Collet and
              Draw Bar.
 
   
CLICK HERE FOR PHOTO  orton tilting spindle shaper router, model F, spindle tilts 90 degrees vertical thru 45 degrees under to 30 degrees outward, spindle speed 10000 rpm, collet capacity 1 inch diameter shank, spindle drive 7.5 hp, table size 30 inch x 60 inch, Serial Number F-72-3999, Photo Close-up Brown & Sharpe Spindle Housing   Photo Close-up 11 Taper Brown & Sharpe spindle.    CLICK HERE FOR PHOTO  orton tilting spindle shaper router, model F, spindle tilts 90 degrees vertical thru 45 degrees under to 30 degrees outward, spindle speed 10000 rpm, collet capacity 1 inch diameter shank, spindle drive 7.5 hp, table size 30 inch x 60 inch, Serial Number F-72-3999, Photo Front view with Spray Mist Oiler  Photo Front view with Spray Mist Oiler.
    
CLICK HERE FOR PHOTO  orton tilting spindle shaper router, model F, spindle tilts 90 degrees vertical thru 45 degrees under to 30 degrees outward, spindle speed 10000 rpm, collet capacity 1 inch diameter shank, spindle drive 7.5 hp, table size 30 inch x 60 inch, Serial Number F-72-3999, Photo Front view with Spray Mist Oiler   Photo Front view with Spray Mist Oiler.         CLICK HERE FOR PHOTO  orton tilting spindle shaper router, model F, spindle tilts 90 degrees vertical thru 45 degrees under to 30 degrees outward, spindle speed 10000 rpm, collet capacity 1 inch diameter shank, spindle drive 7.5 hp, table size 30 inch x 60 inch, Serial Number F-72-3999, Photo View of  B&S 11 taper Spindle & Collet Holder from under the table.   Photo View of B&S 11 taper Spindle & Collet Holder from under the table.
     
CLICK HERE FOR PHOTO  orton tilting spindle shaper router, model F, spindle tilts 90 degrees vertical thru 45 degrees under to 30 degrees outward, spindle speed 10000 rpm, collet capacity 1 inch diameter shank, spindle drive 7.5 hp, table size 30 inch x 60 inch, Serial Number F-72-3999, Photo Collet Holder being set into spindle housing.   Photo Collet Holder being set into spindle housing.



TWO IN-STOCK
▼▼

G
REENLEE INVERTED SPINDLE VERTICAL SHAPER,   Model 175
   
Spindle Speed 14,4000 rpm
  
 
Collet Type Tool Holder 1" Capacity
    Table Size 40" x 55-3/4"
    Spindle Direct Connected Drive Motor 12
½ hp.
    High Cycle Unite 240 cycles
Inventory Reference S3053-5362 
CLICK HERE FOR QUOTATION  greenlee vertical spindle shaper router_model 175_collet capacity 1 inch diameter_speed 14400 rpm_direct drive 12.5 hp_cycles 240 cycles_spindle vertical adjust 4 inch_table size 40 inch x 55.75 inch_frequency converter type_Serial Number 60122
Inventory Reference S3053-5363
CLICK HERE FOR QUOTATION  greenlee vertical spindle shaper router_model 175_collet capacity 1 inch diameter_speed 14400 rpm_direct drive 12.5 hp_cycles 240 cycles_spindle vertical adjust 4 inch_table size 40 inch x 55.75 inch_frequency converter type_Serial Number 60121



COMASCO INVERTED VERTICAL SPINDLE SHAPER
    Spindle Collet capacity 3/4" diameter
    Spindle Speed 8,000 rpm
    Table Size 35" x 70"
    Spindle Drive Motor 5 hp
Equipped with:
    Over head tracer pin
 Inventory Reference  S3053-5359 
CLICK HERE FOR QUOTATION  comasco vertical spindle shaper and router_spindle speed 8000 rpm_collet capacity 0.75 inch diameter_over-head pin guide_table 35.5 inch x 70 inch_motor drive 5 hp



 

MISCELLANEOUS

 DUST COLLECTORS                   Scroll down to view other items  ►
 ▼                           ▼


MICRO AIR FILTER and FAN

Model MT800
Mounted on wheels
Motor Drive 1/4 hp. 115 volts
Inventory Reference A2980-9180 micro air filter and fan_model MT800_mounted on wheels_motor drive 0.250 hp_115 volts
Photo



REESE SELF CONTAINED DUST COLLECTOR
Can be used with Metal Grinder
Model 5.4-60
Hopper Type
Exhaust Cubic Feet Per Minute 1100 cfm
Filter Medium Cloth Bags
Motor drive 3/4 hp 230/460 volts
Inventory Reference D8300-9536
CLICK HERE FOR QUOTATION  reese dust collector_model 5-4-60_self contained_cubic feet per minute 1100 cfm_filter medium cloth bages_inlet opening 3 inch_drive 0.75 hp_Serial Number 11478-1



AGET DUSTKOP DUST COLLECTOR
Can be used with Metal Grinder
Series 800,  Model 8N50,   Serial Number 541
CENTRIFUGAL SEPARATOR
FILTER MEDIUM: Dry Type, Wire Mesh
RATINGS, 200 TO 900 C.F.M. at 5.25” to 2” W.G
RECOMMENDED OPERATING RANGE, 300 TO 700 C.F.M. at 5.25”
With
DUST STORAGE: Pull-Out Drawer: Capacity 3.4 Cubic Feet
     
1-After Filter located on top of cyclone
      1-Section Inlet duct with Suction Shut Off 
Inventory Reference
  D8300-9535-1B  CLICK HERE FOR QUOTATION  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541
CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541
Photo  CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541 Photo   CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541 Photo   CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541 Photo View of unit.




 LARGE SELECTION ROUTING SPINDLES: Sold As-Is or Re-built
"As-Is ROUTING SPINDLES are all in Very Good to Excellent Running Condition"

    LIKE NEW  ONSRUD Louis Allis HIGH SPEED ROUTING SPINDLE MOTOR
8 HP           Out-put Speed  15,000 rpm

INPUT CYCLES 250                 INPUT VOLTAGE 230
Model 135-437      Frame Size 424,
                     Exterior Fan Mounted Above Head
            Inventory Reference R8903-6221 CLICK HERE FOR PHOTO  onsrud high speed routing spindle_ lewis allis_ model CMO_ 8 hp_  type 135-437_ spindle speed 15,000 rpm_  input voltage 230_ input cycles 250_ frame 424
Photo
         
New Cost $9,500.00      Our discounted price $6,500.00

used ONSRUD Louis Allis ROUTER SPINDLE
 8 HP      14,000 rpm

240 cycles         230 volts
Model 135-145     Frame Size 424
Inventory Reference R8903-5347
New Cost $9,000.00      Our discounted price $5,000.00


Email us your requirement at sales@centurymachinery.com

THE FOLLOWING ROUTING SPINDLES in stock

EKSTROM CARLSON ROUTER SPINDLE   5 Hp 15,000 rpm
        250 cycles  306 volts.


CONTINENTAL  ELECTRIC ROUTER SPINDLE  10 Hp  18,000 rpm
         300 cycles   450 volts



CONTINENTAL  ELECTRIC Routing Spindle
 10 Hp  14,400 rpm
         240 cycles   360 volts



ONSRUD ROUTER SPINDLE   5 Hp
  14,750 rpm
        240 cycles   220 volts and 440 volts



ONSRUD ROUTER SPINDLE
  8 Hp  
14,750 rpm
       250 cycles   230 volts



ONSRUD ROUTER SPINDLE  12
½ Hp
  11,200 rpm
      180 cycles    220 volts
         (also have 360 volts).



MARWIN  ROUTING SPINDLE, Multiple Hp. 15/10/9

         Three Speed Ranges  5,200 / 8750 / 10,400 rpm

We have a Large Selection of
 FREQUENCY CONVERTERS,    4 kva thru 75 kva
180 thru 400 cycles
Motor Generator& Solid State Frequency Converters

WE ARE MOVING and need to sell excess inventory



"IF YOU DON'T SEE WHAT YOU NEED PLEASE CONTACT US"
Phone  1- 213-627-2847
Fax  1-213-627-2499
E-mail:  sales@centurymachinery.com
"THANK YOU for taking the time to visit our web site "

"THANK YOU for taking the time to visit our website"