WOODWORKING EQUIPMENT
    A thru R

Link back to Home Page► www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, CATEGORIES ARE IN ALPHABETICAL ORDER.

*BORING MACHINES*
*COPY CARVING MACHINES, Multiple Spindles*
*DUST COLLECTION*
*FEEDERS, POWER*
*FREQUENCY CONVERTERS*
*JOINTERS*
*JOINTER: "New"*
*LATHE*
*MILL, High Speed & Pattern Maker*
*MOLDERS*
*PLANERS (Single Surfacers)*
*PLANERS (Single Surfacers): "New"*
*CNC ROUTERS *
*PIN ROUTERS, Mfg'd. by Ekstrom Carlson, & Onsrud*
*RADIAL ARM ROUTERS & DRILLS, Mfg'd. by Ekstrom Carlson and Onsrud*
*ROUTER SPINDLES, High Speed*

SPECIAL 78 year in business discounted price on all items listed below "CALL".

If you require a Quote Sheet PLEASE  send  us your requirements:
CENTURY MACHINERY COMPANY, INC.
1937 South Santa Fe Avenue
Los Angeles, California 90021

  Email: sales@centurymachinery.com
Website: www.centurymachinery.com
Telephone 1-213-627-2847
Fax 1-213-627-2499


WE REPRESENT THE FOLLOWING  NEW MFG:
"Max Disc and Spindle Sanders"
"Tannewitz Band Saws"
"Powermatic"  Full Line of Woodworking Machines.
Complete line of "NEW" DUST COLLECTORS.

BORING MACHINES

BORING DIRECTION VERTICALLY

ROOT  VERTICAL BORING and MORTISER DRILLING MACHINE   Model G250
Single Spindle
Throat Depth 40"
Chuck Capacity 1/8" thru 5/8"
Spindle Travel 9"
Spindle Speeds: 3,420/1,700 rpm.
Table Size 24" x 32"     Table Tilt 45°
Table Angle Left to Right 36°
Table Knee Adjust Up & Down 12"
Motor Drive 2 hp  
Inventory Reference D6620-5488 CLICK HERE FOR QUOTATION root single spindle vertical borer and mortiser_ model G-250_ 20 inch throat_ tilting and swiveling table 24 inch x 32 inch_ spindle travel 9 inch_ chuck 0.6250 inch_Serial Number 765C5



   COPY CARVING MACHINES
Multiple Spindles

FRIEDRICH DECKEL universal PANTOGRAPH ENGRAVING &
              DIE SINKING MACHINE     Model KF12      THREE DIMENSIONAL
 CAPACITY:
 CUTTER SPINDLES:  Collet 3/4" (Morse 2) (20mm)         Variable Spindle Speeds 60  thru 10000 rpm
     Stationary Work Table: clamping area 9.85" x 27.6"
     Stationary Copyholder Table: clamping area 16.9" x 23.6" with Manual & Power Elevation.
     Supplemental Worktable Top: 17.7" x 17.7"
     Drag Table: clamping area 15.75" x 15.75".
 Equipped with:  1-Rough Milling Spindle Unit.  1-Finish Milling Spindle Unit.
         1-Fine Finishing Spindle Unit.   1-Angular Spindle Units with associated Angular Tracer Pin Holder.
         1-Pantograph System & Cutter Guide Mechanism.     1-Spindle Parallel Guiding Mechanism.
         1-Symmetrical Duplicating Attachment with Clamping Table Assembly.   1-Angular Stylus Holding Bracket.
         1-Auxiliary Table.   1-Drag Table Assembly.    1-Stationary Copyholder Table.
         1-Pattern Forming attachment with Bearing Arm for crankpin.     1-Optical Tracing Attachment.
         1-Immobilizing Bracket for Clamping the Cutter Spindle.     1-Enlarging  & Reducing Attachment.
         2-Handwheel Reduction Gearing.     1- Copy Holder Table for type face 4¾" x 17⅜"_25 Collets.
         Miscellaneous Cutter Extensions.     Miscellaneous Cutters.     Miscellaneous Tracing Stylus.
         Miscellaneous Wrenches.   Miscellaneous Drive Belts.   Work Light. 1-Tool Cabinet
 MOTOR DRIVE: 0.9 - 1.1 kw
 Inventory Reference P0298-10049  CLICK HERE FOR QUOTATION friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915
 EQUIPPED WITH: almost every option available
CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Right Side view Photo Right Side.    CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Right Side view Photo Right Side.     CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Front to Right Side view Photo Front Table to Right Side view.    CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Copy Table to Right Side view Photo Copy Table to Right Side view.
CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Front view with Electric Control Photo Front view with Electric Control.    CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Tables Reduction Gearing & Elevation Drive Photo Close-up Tables Reduction Gearing & Elevation Drive.
CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Work Table Photo Close-up Work Table.      CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Copy Table Photo Close-up Copy Table.     CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Supplemental Table & Drag Table Photo Close-up Supplemental Table & Drag Table.
 CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Variable Speed Chart & Downfeed Mechanism Photo Close-up Variable Speed Chart & Downfeed Mechanism.       CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Hi - Low Speed Motor Switch Photo Close-up Hi - Low Speed Motor Switch.
CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Tooling Photo Tooling.    CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Tooling Photo Tooling.     CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Tooling Photo Tooling.    CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4¾" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Tooling Photo Tooling Storage Cabinet.





DUST COLLECTION

MURPHY RODGER DUST COLLECTOR
Size MRT-7A-S
PORTABLE SELF CONTAINED
FILTER MEDIUM: Dry Type Single Cloth Bags
AIR DELIVERED 1206 cfm.
FREE AIR 1600 cfm.
INLET DUCT OPENING 7”
FAN MOTOR: 3 hp
EQUIPPED WITH:
      Radial type Fan & Motor.  Assembly Filter Bag.
      Vertical Piping & Elbows to Filter Bag.
      1- 55 Gallon Waste Barrel (Container)
      All mounted on Portable Cart.
      Magnetic Starter
Dimensions 23¾" F-B x 51” L-R x 91” High
New replacement cost $2700.00
Condition  LIKE NEW
Inventory Reference Numbers  D8300-9914  CLICK HERE FOR QUOTATION murphy rodgers dust collector_model MRT-7AS_self contained_cubic feet per minute 1206 cfm_inlet opening 7 inch_filter medium cloth bages_storage drum 55 gallon_drive 3 hp_mounted on partable cart_Serial Number 1040_LIKE NEW CONDITION  CLICK HERE FOR PHOTO murphy rodgers dust collector_model MRT-7AS_self contained_cubic feet per minute 1206 cfm_inlet opening 7 inch_filter medium cloth bages_storage drum 55 gallon_drive 3 hp_mounted on partable cart_Serial Number 1040_LIKE NEW CONDITION Photo
SPECIAL WEBSITE DISCOUNTED PRICE $750.00




TWO Jet Dust Collorcots IN STOCK
▼▼
JET DUST COLLECTOR
Model DC1182,     Stock Number 708630
PORTABLE SELF CONTAINED
FILTER MEDIUM: Dry Type Two Cloth Bags
AIR DELIVERED 1200 cfm.
INLET DUCT OPENING 5”
FAN MOTOR: 2 hp. 115-230 volts Single Phase
EQUIPPED WITH:
      Radial type Fan & Motor.
      Upper Filter Bag 20½" diameter x 30" length
      Lower Cloth Container 20½" diameter x 30" length
      All mounted on Portable Cart.
      Magnetic Starter
Condition Like New
Inventory Reference Numbers  D8300-9916  CLICK HERE FOR QUOTATION jet dust collector_model DC1182_Stock 708630_self contained_cubic feet per minute 1200 cfm_inlet opening 5 inch_filter medium cloth bages_lower storage bag_drive 2 hp_115-230 volts single phase_Serial Number 7910462_MOUNTED ON PORTABLE CART  CLICK HERE FOR PHOTO jet dust collector_model DC1182_Stock 708630_self contained_cubic feet per minute 1200 cfm_inlet opening 5 inch_filter medium cloth bages_lower storage bag_drive 2 hp_115-230 volts single phase_Serial Number 7910462_MOUNTED ON PORTABLE CART Photo
SPECIAL WEBSITE DISCOUNTED PRICE $425.00



CINCINNATI  DUST COLLECTOR
Model 200S/T3
PORTABLE SELF CONTAINED
AIR DELIVERED 1200 cfm.
INLET DUCT OPENING 5½”
OUTLET DUCT OPENING 6"
FAN MOTOR: 2 hp. 208-230/460 volts
EQUIPPED WITH:
      Mounted onto 55 gallon drum which is then
         mounted on Portable Cart.
      Magnetic Starter
Condition Like New
Inventory Reference Numbers  D8300-9993  CLICK HERE FOR QUOTATION cincinnati dust collector_model 200S-T3_1100 CFPM_inlet opening 5 inch_18 sq ft filter bages_storage drum 55 gal_2 hp_storage tank on casters_Serial Number 700186_MOUNTED ON PORTABLE CART  CLICK HERE FOR PHOTO cincinnati dust collector_model 200S-T3_1100 CFPM_inlet opening 5 inch_18 sq ft filter bages_storage drum 55 gal_2 hp_storage tank on casters_P.O. GR22424250_Serial Number 700186 Photo
SPECIAL WEBSITE DISCOUNTED PRICE $350.00



MICRO AIR FILTER and FAN
Model MT800
Mounted on wheels
Motor Drive 1/4 hp. 115 volts
Inventory Reference A2980-9180 micro air filter and fan_model MT800_mounted on wheels_motor drive 0.250 hp_115 volts Photo
SPECIAL WEBSITE DISCOUNTED PRICE $100.00 each



REESE SELF CONTAINED DUST COLLECTOR
Can be used with Metal Grinder
Model 5.4-60
Hopper Type
Exhaust Cubic Feet Per Minute 1100 cfm
Filter Medium Cloth Bags
Motor drive 3/4 hp 230/460 volts
Inventory Reference D8300-9536 CLICK HERE FOR QUOTATION reese dust collector_model 5-4-60_self contained_cubic feet per minute 1100 cfm_filter medium cloth bages_inlet opening 3 inch_drive 0.75 hp_Serial Number 11478-1



AGET DUSTKOP DUST COLLECTOR
Can be used with Metal Grinder
Series 800,  Model 8N50,   Serial Number 541
CENTRIFUGAL SEPARATOR
FILTER MEDIUM: Dry Type, Wire Mesh
RATINGS, 200 TO 900 C.F.M. at 5.25” to 2” W.G
RECOMMENDED OPERATING RANGE, 300 TO 700 C.F.M. at 5.25”
With DUST STORAGE: Pull-Out Drawer: Capacity 3.4 Cubic Feet
      1-After Filter located on top of cyclone
      1-Section Inlet duct with Suction Shut Off 
Inventory Reference   D8300-9535-1B  CLICK HERE FOR QUOTATION aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541
CLICK HERE FOR PHOTO aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541 Photo   CLICK HERE FOR PHOTO aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541  Photo CLICK HERE FOR PHOTO aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541 Photo  CLICK HERE FOR PHOTO aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541  Photo View of unit.


FOR QUOTES Please
    Call  1- 213-627-2847
    Fax  1- 213-627-2499
    E-mail us at    sales@centurymachinery.com






FEEDERS, POWER

"NEW" Powermatic POWER FEEDERS Three or Four Wheels


FOR ALL YOUR EQUIPMENT REQUIREMENTS: Wanted or For-Sale, Please

Tel  1- 213-627-2847
Fax  1- 213-627-2499
E-mail us at    sales@centurymachinery.com





JOINTERS    W8320-




OLIVER CYLINDER KNIFE GRINDING and JOINTING BAR HOLDING ATTACHMENT
Was on 399D Planer (Single Surfacer)            Can also be placed onto Jointer
Holder Cross Travel 26"
Vertical Slide Travel 7"
Inventory Reference T3953-9726  CLICK HERE FOR QUOTATION oliver cylindrical knike jointing and grinding attachment holder_jointing bar_holder cross travel 26 inch_was used on 399D_Serial 205900_ID 017-621
CLICK HERE FOR PHOTO oliver cylindrical knike jointing and grinding attachment holder_jointing bar_holder cross travel 26 inch_was used on 399D_Serial 205900_ID 017-621_Front View Photo Front view.        CLICK HERE FOR PHOTO oliver cylindrical knike jointing and grinding attachment holder_jointing bar_holder cross travel 26 inch_was used on 399D_Serial 205900_ID 017-621_Rear View Photo Rear View.        CLICK HERE FOR PHOTO oliver cylindrical knike jointing and grinding attachment holder_jointing bar_holder cross travel 26 inch_was used on 399D_Serial 205900_ID 017-621_ID Tag Photo ID Tag.

Several others Jointing Bars in stock.

 

"NEW" Powermatic Jointers:
    Powermatic Jointer, 6" wide,  Model 54, 3/4 hp, 1-phase. Ref. W8320-1791051
    Powermatic Jointer, 8" wide, Model 60,  Offered with 1½ or 2 hp, Single or Three Phase. Ref. W8320-


FOR ALL YOUR EQUIPMENT REQUIREMENTS: Wanted or For-Sale

Please Call: 1- 213-627-2847
              Fax: 1- 213-627-2499
              E-mail us at:   sales@centurymachinery.com







LATHE    W8330-

 

 

MILL, High Speed & Pattern Maker

18" x 36" EKSTROM CARLSON  High Speed VERTICAL MILLER,   Model 540
"Not used since mill Rebuilt 2005"
    Speeds100 thru 5000 rpm.     Spindle Collet Capacity 1" diameter.
    Spindle Quill Travel Down 7"
    Spindle Ram Travel In and out thru 26"
    Spindle Head Tilt Left /Right of 90 degrees.
Ram move in/out and rotates 360 degrees.
Table: Tilts Forward & Back 30º, Moves Longitudinally and Cross Travel.
Table Knee adjusts Up and Down thru 23"
Motor drive 5 hp.   Inventory Reference  M2824-4032  CLICK HERE FOR QUOTATION EKSTROM CARLSON VERTICAL ROUTING/MILLING MACHINE_model 540_throat depth 31"_spindle collet capacity 1" diameter_spindle quill travel manually 7" to a maximum of 8"_spindle ram in out travel 26"_spindle head tilts either direction 90 degrees_12 spindle speeds 100 thru 5000 rpm_table longitudinal and cross feed manually_table knee vertical rise and fall manually_table has 3 t-slots_table overall size 18" x 36"_table longitudinal travel X-Axis is 30"_table cross slide travel Y-Axis is 16"_table knee vertical travel Z-Axis is 23"_table tilts up or down 30 degrees_spindle motor drive is 5 hp_equipped with 11-collets 1/16" thru 1"_Serial Number 540-166  CLICK HERE FOR PHOTO EKSTROM CARLSON VERTICAL ROUTING/MILLING MACHINE_model 540_throat depth 31"_spindle collet capacity 1" diameter_spindle quill travel manually 7" to a maximum of 8"_spindle ram in out travel 26"_spindle head tilts either direction 90 degrees_12 spindle speeds 100 thru 5000 rpm_table longitudinal and cross feed manually_table knee vertical rise and fall manually_table has 3 t-slots_table overall size 18" x 36"_table longitudinal travel X-Axis is 30"_table cross slide travel Y-Axis is 16"_table knee vertical travel Z-Axis is 23"_table tilts up or down 30 degrees_spindle motor drive is 5 hp_equipped with 11-collets 1/16" thru 1"_Serial Number 540-166 Photo
SPECIAL WEBSITE DISCOUNTED PRICE $3,850.00





MOLDERS 

LARGE SELECTION of MOLDER HEADS:
 ROUND 2" height x 4" diameter.  3" height x 4" diameter.  4" height x 4" diameter. From 3 to 12 cutters.
                2" height x 6" diameter.  3" height x 6" diameter.  4" height x 6" diameter. From 3 to 12 cutters.
                2" height x 8" diameter.  3" height x 8" diameter.  4" height x 8" diameter. From 3 to 12 cutters.
                2" height x 10" diameter.  3" height x 10" diameter.  4" height x 10" diameter. From 3 to 12 cutters.
 SQUARE 4" x 4" and 6" x 6"

Please Call: 1- 213-627-2847
              Fax: 1- 213-627-2499
              E-mail us at:   sales@centurymachinery.com




PLANERS, Woodworking (Single Surfacers) 

20" wide x 6" height  PARK WOODWORKING PLANER, (Single Surfacer)
Cutter Head 4 Knifes
Solid Chip Breaker
Cutter Head Motor Drive Direct Connected 10 hp.
Inventory Reference P1960-9504  CLICK HERE FOR QUOTATION parks woodworking planer_single surfacer_model 20_capacity 20 inch wide x 6 inch height_four knife head_drive 5 hp_two speed feed_Serial 20989


30" wide x 9-1/2 height  OLIVER WOODWORKING PLANER,  (Single Surfacer)
Model 361-AD
Cutter Head 4 Knifes
Cutter Head Motor Drive Direct Connected 15 hp.
Feed Motor Drive, 3-Speeds
Table Elevation Motor ½ hp.
Equipped with Jointer Bar.
Inventory Reference P1960-3955  CLICK HERE FOR QUOTATION oliver single surfacer planer_single surfacer_model 361-AD_capacity 30 inch wide_maximum height 9.250 inch_sectional feed rolls and chip breaker_four knifes head driven by 15 hp_4- feeds_Serial 78684
 
 

   OLIVER CYLINDER KNIFE GRINDING and JOINTING BAR HOLDING ATTACHMENT
          Was on 399D Planer (Single Surfacer)            Can also be placed onto Jointer
      Holder Cross Travel 26"
      Vertical Slide Travel 7"
  Inventory Reference T3953-9726  CLICK HERE FOR QUOTATION oliver cylindrical knike jointing and grinding attachment holder_jointing bar_holder cross travel 26 inch_was used on 399D_Serial 205900_ID 017-621
       CLICK HERE FOR PHOTO oliver cylindrical knike jointing and grinding attachment holder_jointing bar_holder cross travel 26 inch_was used on 399D_Serial 205900_ID 017-621_Front View Photo Front view.           CLICK HERE FOR PHOTO oliver cylindrical knike jointing and grinding attachment holder_jointing bar_holder cross travel 26 inch_was used on 399D_Serial 205900_ID 017-621_Rear View Photo Rear View.          CLICK HERE FOR PHOTO oliver cylindrical knike jointing and grinding attachment holder_jointing bar_holder cross travel 26 inch_was used on 399D_Serial 205900_ID 017-621_ID Tag Photo ID Tag.

Several others in-stock




"NEW" Powermatic PLANERS
    15" wide Model 15, 3 hp, 1-phase Ref. P1960-1791209
    18" wide Model 180, Heavy Cast model, Offered 7½ hp, 3-phase or 5 hp. 1-phase
                                                                                                                Ref. P1960-
    12" PLANER/MOLDER 5 hp, 1-phase  Ref. P1960-1120001


FOR ALL YOUR EQUIPMENT REQUIREMENTS: Wanted or For-Sale
 

Please Call: 1- 213-627-2847
              Fax: 1- 213-627-2499
              E-mail us at:   sales@centurymachinery.com






CNC ROUTERS  

    "WE ARE ALWAYS LOOKING TO PURCHASE 3 & 5 axis CNC ROUTERS"

THREE AXIS ROUTERS and DRILLS
▼▼▼

3-Axis KOMO Vertical CNC ROUTER and DRILL,   Model VR-805-Q,   Year Mfg 1995
Moving Bed & Heads 
Four (4) ROUTING SPINDLES each: 12½ Hp. 18,000 rpm.
Four (4) BORING & DRILL SPINDLES Piggyback
Spindle Head Spacing Adjustable 10" thru 24" centers.
WORK ENVELOPE 96" x 60" x 6"
Equipped with  GE Fanuc OM Control.
        VACUUM TABLE.
        1-Sullair Vacuum Pump   Inventory Reference R8906-9221 CLICK HERE FOR QUOTATION komo 3-axis cnc router and drill_model VR805Q_table 60 inch x 96 inch_4-routers 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axis 71.5 inch_Z-axis 8 inch_mfg 1995_Serial 12446944
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_table size 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_travel X-axis 244 inch_travel Y-axis 71.5 inch_travel Z-axis 8 inch_mfg 1994_Serial Number 1244694_Over-all view Photo Router.       CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_table size 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_travel X-axis 244 inch_travel Y-axis 71.5 inch_travel Z-axis 8 inch_mfg 1994_Serial Number 1244694_Overall View 4 spindles carriages with Router Spindles and Piggyback Drills Photo View of Routing & Drill Heads.  
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_table size 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_travel X-axis 244 inch_travel Y-axis 71.5 inch_travel Z-axis 8 inch_mfg 1994_Serial Number 1244694_Carriage with Router Spindle and Drill with Spindle center adjustment Side View Photo Side View Center Adjustment for Spindle Centers.
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_table size 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_travel X-axis 244 inch_travel Y-axis 71.5 inch_travel Z-axis 8 inch_mfg 1994_Serial Number 1244694_Spindle Assembly Left to Right View Photo Close Up Routing Spindle & Piggyback Drill Head.
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_table size 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_travel X-axis 244 inch_travel Y-axis 71.5 inch_travel Z-axis 8 inch_mfg 1994_Serial Number 1244694_Front view Router and Piggyback Drill Head Photo Close up Piggyback Drill Head.
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_table size 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_travel X-axis 244 inch_travel Y-axis 71.5 inch_travel Z-axis 8 inch_mfg 1994_Serial Number 1244694_Router & Piggyback Drill located on right side of cross rail. Photo Close up Right End Router Head & Piggyback Drill located on right side.
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_table size 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_travel X-axis 244 inch_travel Y-axis 71.5 inch_travel Z-axis 8 inch_mfg 1994_Serial Number 1244694_Fanuc O-M CNC Control Photo GE Fanuc O-M Operator Control.     CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_table size 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_travel X-axis 244 inch_travel Y-axis 71.5 inch_travel Z-axis 8 inch_mfg 1994_Serial Number 1244694_Close up Hand Contro Photo Hand Control.
CLICK HERE FOR PHOTO sullair 30 Hp_Vacuum Pump RSVS-12_with Filter_for komo 3-axis cnc router and drill_model VR805Q_table size 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_travel X-axis 244 inch_travel Y-axis 71.5 inch_travel Z-axis 8 inch_mfg 1994_Serial Number 1244694 Photo Sullair Vacuum Pump.         CLICK HERE FOR PHOTO Vaccumm Filter_sullair 30 Hp_Vacuum Pump RSVS-12_with Filter_for komo 3-axis cnc router and drill_model VR805Q_table size 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_travel X-axis 244 inch_travel Y-axis 71.5 inch_travel Z-axis 8 inch_mfg 1994_Serial Number 1244694 Photo Vacuum Filter. 



3-Axis KOMO Vertical CNC ROUTER and DRILL
Model VR-805-Q         Year Mfg November 1990
Moving Bed and Heads 
Four (4) ROUTING SPINDLES each 12½ Hp  18,000 rpm
Four (4) BORING & DRILL SPINDLES Piggyback
Spindle Head Spacing Adjustable 10" thru 24" centers
WORK ENVELOPE 96" x 60" x 6"
Equipped with GE Fanuc OM Control.
        VACUUM TABLE.    .
        1-Ingersoll Rand Vacuum Pump
Inventory Reference R8906-9222 CLICK HERE FOR QUOTATION komo 3-axis cnc router and drill_model VR805Q_table 60 inch x 96 inch_4-routers 12 hp_18000 rpm_4- drill heads_vacuum chuck_X-axis 244 inch_Y-axis 71.5 inch_Z-axis 8 inch_mfg 11-1990_Ser 1552  CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_table size 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_travel X-axis 244 inch_travel Y-axis 71.5 inch_travel Z-axis 8 inch_mfg 11-1990_Serial Number 1552_Overall view Photo



5- AXIS PROFILERS

5-Axis CINCINNATI MILACRON Vertical Honeycomb Profiler  
Model 20V       Bed Type
Spindle Speed, Infinitely Variable 7,200 thru 24,000 rpm
Spindle Slide  Vertical Travel (Z-Axis) 24"
Spindle Head Rotates (B-Axis) Tilt -110 degrees to 10 degrees.
        (C-Axis) Twist +/- 190 degrees
Spindle Carrier  Auto Tilt Type
WORK HEIGHT Spindle Pivot point to Working Surface 5.75" Minimum
        Maximum 29.75"
TABLE  SIZE 40" x 130"
Longitudinal Travel (X-Axis) 120"     Transverse (Y-Axis) 42"
Equipped with 7Spindle Cooling Glycol with Chiller
    Dust Collection System
    RS232 Port with 2nd Computer  Inventory Reference P8227-6917  CLICK HERE FOR QUOTATION: cincinnati milacron 5 axis vertical honeycomb profiler_model 20V_table size 40 inch x 120 inch_variable spindle speeds 7200 thru 24000 rpm_table longitudinal travel X-Axis 120 inch_table transverse travel Y-Axis 42 inch_spindle vertical travel Z-Axis 24 inch_spindle head rotates and tilt B-Axis 110 degrees to 10 degrees_ spindle twist + - 190 degrees_maximum working height 29.75 inch_Up dated second computer_glyco chiller for spindle_dust collection system_condition like new_ Serial Number87-416Q779-1
 "Very little Use"    *A MUST SEE*
CLICK HERE FOR PHOTO: cincinnati milacron 5 axis vertical honeycomb profiler_model 20V_table size 40 inch x 120 inch_variable spindle speeds 7200 thru 24000 rpm_table longitudinal travel X-Axis 120 inch_table transverse travel Y-Axis 42 inch_spindle vertical travel Z-Axis 24 inch_spindle head rotates and tilt B-Axis 110 degrees to 10 degrees_ spindle twist + - 190 degrees_maximum working height 29.75 inch_Up dated second computer_glyco chiller for spindle_dust collection system_condition like new_ Serial Number87-416Q779-1_View looking down Photo Machine w/ Dust Collector at extreme right.
 CLICK HERE FOR PHOTO: cincinnati milacron 5 axis vertical honeycomb profiler_model 20V_table size 40 inch x 120 inch_variable spindle speeds 7200 thru 24000 rpm_table longitudinal travel X-Axis 120 inch_table transverse travel Y-Axis 42 inch_spindle vertical travel Z-Axis 24 inch_spindle head rotates and tilt B-Axis 110 degrees to 10 degrees_ spindle twist + - 190 degrees_maximum working height 29.75 inch_Up dated second computer_glyco chiller for spindle_dust collection system_condition like new_Serial Number 87-416Q779-1_4 photos spindle head Four Photos Router Head.    CLICK HERE FOR PHOTO: cincinnati milacron 5 axis vertical honeycomb profiler_model 20V_table size 40 inch x 120 inch_variable spindle speeds 7200 thru 24000 rpm_table longitudinal travel X-Axis 120 inch_table transverse travel Y-Axis 42 inch_spindle vertical travel Z-Axis 24 inch_spindle head rotates and tilt B-Axis 110 degrees to 10 degrees_ spindle twist + - 190 degrees_maximum working height 29.75 inch_Up dated second computer_glyco chiller for spindle_dust collection system_condition like new_Serial Number 87-416Q779-1_2- Photos exhaust system Photo's Exhaust Collection System.
 Book photo CLICK HERE FOR PHOTO: cincinnati milacron 5 axis vertical honeycomb profiler_model 20V_table size 40 inch x 120 inch_variable spindle speeds 7200 thru 24000 rpm_table longitudinal travel X-Axis 120 inch_table transverse travel Y-Axis 42 inch_spindle vertical travel Z-Axis 24 inch_spindle head rotates and tilt B-Axis 110 degrees to 10 degrees_ spindle twist + - 190 degrees_maximum working height 29.75 inch_Up dated second computer_glyco chiller for spindle_dust collection system_condition like new_Serial Number 87-416Q779-1_2- Photos exhaust system_Book photo



5-Axis CINCINNATI MILACRON CNC HYDROTEL VERTICAL MILLER
    Model 20V-120
Working Surface 40" x 120"
Inventory ReferenceM1748-5918
This Profiler is sold. Please use as example as how we finish our machines.
Two photo's with-in. CLICK HERE FOR PHOT cincinnati milacron_ 5 axis CNC vertical profiler mill Photo









  PIN ROUTERS, Mfg'd by Ekstrom Carlson, & Onsrud  R8903-

LARGEST SELECTION IN THE U.S.A.
Mfg.  *ONSRUD*   * EKSTROM CARLSON* & ORTON
Pin Routers,      Under Table Routers / Shapers
Tilting Spindle Shapers Routers,      and     CNC Routers
RECONDITIONED             or                      " REBUILT "
"Large selection High Speed Routing Heads"

PIN ROUTERS, 
  Mfg. by Ekstrom Carlson  and Onsrud  R8903-

ONSRUD PIN ROUTERS (Re-Built):  R8903-


ONSRUD PIN ROUTER, Model W1124
    24" throat
    Spindle Speeds 10,000 and 20,000 rpm.
    Spindle drive 5 hp.
    Table Size 26" x 36"  Inventory Reference R1621 CLICK HERE FOR QUOTATION: onsrud pin router_model W1124_throat depth 24 inch_spindle speeds 10000 and 20000 rpm_pneumatic down on spindle_motor drive 5 hp_table size 26 inch x 36 inch_table adjust vertically 13 inch



ONSRUD PIN ROUTER  Model A1124A
     24" throat  
    Spindle Speeds 10,000  and 20,000 rpm
    Spindle Drive 7.5 hp
    Table Size 26" x 36"      Inventory Reference R8903-9177 CLICK HERE FOR QUOTATION onsrud pin router_model A-1124A_throat depth 24 inch_spindle speeds 10000 - 20000 rpm_spindle drive 5 hp_tilting table 26 inch x 36 inch_Serial Number 9713  CLICK HERE FOR PHOTO onsrud pin router_model A1124-A, throat depth 24 inch_spindle speeds 10000 and 20000 rpm_table size 26 inch x 36 inch_motor drive 7.5 hpPhoto   CLICK HERE FOR PHOTO onsrud pin router_model A1124-A_throat depth 24 inch_spindle speeds 10000 and 20000 rpm_table size 26 inch x 36 inch_motor drive 7.5 hp Photo



ONSRUD PIN ROUTER  Model A1124A
     24" throat    
    Spindle Speeds 10,000  and 20,000 rpm
   Spindle drive 7.5 hp
   Table Size 26" x 36"      Inventory Reference R8903-5338  CLICK HERE FOR QUOTATION onsrud pin router_model A1124A_ throat depth 24 inch_ spindle drive 7.5 and 7.5 hp_ spindle speeds 10000 and 20000 rpm_ tilting table 26 inch x 36 inch_ Serial Number 9174_ Late Frame  CLICK HERE FOR PHOTO onsrud pin router_model A1124-A_throat depth 24 inch_spindle speeds 10000 and 20000 rpm_table size 26 inch x 36 inch_motor drive 7.5 hp Photo
 
  

ONSRUD PIN ROUTER  Model A1124-A
     24" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 7.5 hp. and 10 hp
    Table Size 26" x 36"
Inventory Reference R8903-9539-A  CLICK HERE FOR QUOTATION onsrud pin router_model A1124-A_throat depth 24 inch_spindle 10000 - 20000 rpm_drive 10 - 7.5 hp_volt 460_Late Frame_Serial Number 897890-01  CLICK HERE FOR PHOTO onsrud pin router_model A1124-A_throat depth 24 inch_spindle speeds 10000 - 20000 rpm_spindle drive 7.5 and 10 hp_table 25 inch x 36 inch_Late Frame_Serial Number 897890-1 Photo



ONSRUD PIN ROUTER  Model W1124
     24" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 7.5 hp. and 10 hp
    Table Size 26" x 36"    Inventory Reference R8903-5005 CLICK HERE FOR QUOTATION onsrud pin router_model W-1124_throat depth 24 inch_spindle speeds 10000 - 20000 rpm_spindle drive 7.5 and 10 hp_table 25 inch x 36 inch_Late Frame_Serial Number 11053  CLICK HERE FOR PHOTO onsrud pin router_model W-1124_throat depth 24 inch_spindle speeds 10000 - 20000 rpm_spindle drive 7.5 and 10 hp_table 25 inch x 36 inch_Late Frame_Serial 11053 Photo



ONSRUD PIN ROUTER   Model A1136A
     36" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 5 hp
    Table Size 36" x 48"    Inventory Reference R8903-9331



ONSRUD PIN ROUTER, Model A1136
    36" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 7½ hp. and 10 hp
    Spindle travel by pneumatic cylinder Up and Down
    Table Size 26" x 36"               Inventory Reference   R8903-8701  CLICK HERE FOR PHOTO onsrud pin router_model A1136_ throat depth 36 inch_spindle speeds 10000 and 20000 rpm_spindle drive 7.5 and 10 hp_ table 26 inch x 36 inch_Serial 787321-01_ Front View_Late FramePhoto   CLICK HERE FOR PHOTO onsrud pin router_model A1136_ throat depth 36 inch_spindle speeds 10000 and 20000 rpm_spindle drive 7.5 and 10 hp_ table 26 inch x 36 inch_ Serial 787321-01_ Front View_Late Frame Photo
  ▲"THIS ROUTER SOLD USE AS EXAMPLE OF FINISHED PRODUCT"▲



ONSRUD PIN ROUTER, Model A1136-A
    36" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 7½ hp. and 10 hp
    Spindle travel by pneumatic cylinder Up and Down
    Table Size 26" x 36"               Inventory Reference   R8903-9713  CLICK HERE FOR QUOTATION onsrud horn pin router_model A1136-A_throat depth 36 inch_spindle 10000 - 20000 rpm_drive 10 - 7.5 hp_volt 460_Late Frame_with standard table_Serial Number 897897-01
PLEASE NOTE: This router is currently set-up as Horn Router and has standard table.



THIS ROUTER JUST SOLD TO OUR EAST COAST CUSTOMER
ONSRUD PIN ROUTER   Model W1136A
    36" throat
    Spindle Speed 10,000  and 20,000 rpm
    Spindle Drive 7.5 hp. thru 7.5 hp
    Re-ground Table Size 45" x 55.5"
Inventory Reference  R8903-9213 CLICK HERE FOR QUOTATION onsrud pin router_model W1136A_throat depth 36 inch_ spindle speed 10000 & 20000_ spindle drive 7.5 & 7.5 hp_220 volts_re-gound table size 45 inch x 55.5 inch_Serial Number 9436_Just Rebuilt 8-2012
THE FOLLOWING PHOTO JUST TAKEN August 23-2012
▼                                                    ▼                            ▼
CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_ spindle speed 10000 & 20000_ spindle drive 7.5 & 7.5 hp_220 volts_re-gound table size 45 inch x 55.5 inch_Serial Number 9436_Just Rebuilt 8-2012_Photo Right side to Front Photo Right Side to Front.      CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_ spindle speed 10000 & 20000_ spindle drive 7.5 & 7.5 hp_220 volts_re-gound table size 45 inch x 55.5 inch_Serial Number 9436_Just Rebuilt 8-2012_Photo Front Photo Front.     CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_ spindle speed 10000 & 20000_ spindle drive 7.5 & 7.5 hp_220 volts_re-gound table size 45 inch x 55.5 inch_Serial Number 9436_Just Rebuilt 8-2012_Photo Left Side Photo Left Side.
 CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_ spindle speed 10000 & 20000_ spindle drive 7.5 & 7.5 hp_220 volts_re-gound table size 45 inch x 55.5 inch_Serial Number 9436_Just Rebuilt 8-2012_Photo Close-up Re-ground Table Photo Close-up Re-ground Table.       CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_ spindle speed 10000 & 20000_ spindle drive 7.5 & 7.5 hp_220 volts_re-gound table size 45 inch x 55.5 inch_Serial Number 9436_Just Rebuilt 8-2012_Photo Router with Transformer Photo Router with Transformer.



 

BEING REBUILT   START TO FINISH

ONSRUD PIN ROUTER  Model W1136A
36" throat
Spindle Speeds 10,000 and 20,000 rpm
Spindle Drive 7.5 hp and 10 hp
Table Size 36" x 48"
Inventory Reference R8903-9661 CLICK HERE FOR QUOTATION onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 - 10 hp_volt 480_table size 36 inch x 48 inch_Serial Number 857723-7_Late Frame

 CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 - 10 hp_volt 480_table size 36 inch x 48 inch_Serial Number 857723-7_Late Frame Photo Prior too.        CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 - 10 hp_volt 480_table size 36 inch x 48 inch_Serial Number 857723-7_Late Frame_motor compartment 5-09 Photo Drive Motor & Spindle Removed.     
 CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 - 10 hp_volt 480_table size 36 inch x 48 inch_Serial Number 857723-7_Late Frame_ Prior to second color 5-09 Photo Rear to Left Side being work on.       CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 - 10 hp_volt 480_table size 36 inch x 48 inch_Serial Number 857723-7_Late Frame_ Prior to second color 5-09 Photo Right Side with spindle housing installed.
 CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 - 10 hp_volt 480_table size 36 inch x 48 inch_Serial Number 857723-7_Late Frame_Inside motor compartment Photo Inside Drive Motor Compartment repainted with New Oil & Pneumatic Lines Installed.
 CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 - 10 hp_volt 480_table size 36 inch x 48 inch_Serial Number 857723-7_Late Frame_under side table Photo Bottom of re-surfaced table prior to being installed showing second color.
 ROUTER RE ASSEMBLED
   CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 - 10 hp_volt 480_table size 36 inch x 48 inch_Serial Number 857723-7_Late Frame_left side Photo Left Side.      CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 - 10 hp_volt 480_table size 36 inch x 48 inch_Serial Number 857723-7_Late Frame_right side Photo Front to Right Side.      CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 - 10 hp_volt 480_table size 36 inch x 48 inch_Serial Number 857723-7_Late Frame_rear to left side Photo Rear to Left Side.      CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 - 10 hp_volt 480_table size 36 inch x 48 inch_Serial Number 857723-7_Late Frame_ Electric Controls Photo Electrical Controls.
   CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 - 10 hp_volt 480_table size 36 inch x 48 inch_Serial Number 857723-7_Late Frame_Guide Pin Lock Photo Under table showing Guide Pin Lock.


ONSRUD PIN ROUTER   Model W1136A
    36" throat
    Spindle Speed 10,000  and 20,000 rpm
    Spindle Drive 7.5 hp. thru 7.5 hp
    Table Size 36" x 48"
Inventory Reference  R8903-9214 CLICK HERE FOR QUOTATION onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 & 7.5 hp_volt 440_table size 36 inch x 48 inch_Serial Number 9091_control wall mounted
                                                                                       


CHECK THIS ONE OUT
ONSRUD PIN ROUTER  Model A1136-7M
    36" throat
   Spindle Speeds 10,000 and 20,000 rpm
   Spindle Drive 7½ hp and 10 hp
   Tilting Table 36" x 48"
Inventory Reference R8903-7216
CLICK HERE FOR PHOTO: onsrud pin router_model W-1136_throat depth 36 inch_spindle speed 10000 and 20000_spindle drive 5 hp 480 volts_Equipped with TWO AXIS T-slotted table 28 inch x 33 inch_Serial Number 8295 Two photo's with-in
  ▲"THIS ROUTER SOLD USE AS EXAMPLE OF FINISHED PRODUCT"




ONSRUD PIN ROUTER Model W240
    24" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 5 hp   
    Table Size 24" x 36"
Inventory Reference R8903-5339 CLICK HERE FOR QUOTATION onsrud pin router_model W240_throat depth 24 inch_spindle speeds 10000 and 20000_spindle drive 5 hp_tilting table 24 inch x 36 inch



ONSRUD PIN ROUTER  Model W244E
    24" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 5 hp.
    Tilting Table: 36" x 48" and Tilts 45º down and 15º up
Inventory Reference R8903-5341 CLICK HERE FOR QUOTATION onsrud pin router_model W244E_throat depth 24 inch_spindle speeds 10000 and 20000_spindle drive 5 hp_ tilting table 24 inch x 36 inch_Serial Number 6729



ONSRUD PIN ROUTER  Model W244
    24" throat
    Spindle Speeds 20,000 rpm. (Single Spindle Speed)
    Spindle Drive 5 hp
    Tilting Table: 26½" x 36" and Tilts 45º down and 15º up
Inventory Reference  R8903-3963 CLICK HERE FOR QUOTATION onsrud pin router model W244_ throat depth 24 inch_ spindle speed 20000 rpm_ spindle drive 5 hp_ tilting table 26.5 inch x 36 inch_spindle travel 3.5 by treadle _Serial Number 5700




CONTINENTAL PIN ROUTER
    29" throat
    Spindle Speeds 7,200 and 14,400 rpm.
    Spindle drive 5 hp
    Table: 27½" x 29½"
Equipped with:  Leiman Vacuum Pump to attach to parts hold-down chuck.
Inventory ReferenceR8903-3962 CLICK HERE FOR QUOTATION: continental pin router_throat depth 29 inch_router motor 5 hp_spindle speeds 7200 & 14400 rpm_table size 27.5 inch x 29.5 inch_vacuum part hold down with vacumm pump_Serial Number 800-3 and 68774



PIN ROUTERS WITH 2 AXIS TABLES

ONSRUD PIN ROUTER, Model W1136,  36" throat
    Table Two Axis  23" x 33"  Longitudinal  and Cross Feed
    Table Knee with Vertical Adjustment
    Spindle Speeds 10,000 and 20,000 rpm.
    Spindle Drive 5 hp.
 Inventory ReferenceR8903-6752 CLICK HERE FOR QUOTATION: onsrud pin router_model W-1136_throat depth 36 inch_two spindle speeds 10000 and 20000_spindle drive 5 hp. 480 volts_Equipped with TWO AXIS T-slotted table 28 inch x 33 inch_Serial Number 8295 CLICK HERE FOR PHOTO: onsrud pin router_model W-1136_throat depth 36 inch_two spindle speeds 10000 and 20000_spindle drive 5 hp. 480 volts_Equipped with TWO AXIS T-slotted table 28 inch x 33 inch_Serial Number 8295


(Some of the above Pin Routers have Tilting Tables)



HORN PIN ROUTER
ONSRUD HORN PIN ROUTER  Model A1124A
    24" throat  
   Spindle Speeds 10,000 and 20,000 rpm
   Spindle Drive 5 hp.
Inventory Reference  R8903-5345 CLICK HERE FOR QUOTATION onsrud pin horn router_model A1134A_throat depth 24 inch_ spindle speeds 10000 and 20000_spindle drive 5 hp_Serial Number 7983



ONSRUD HORN PIN ROUTER  Model A1136A
    36" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 7.5 hp and 7.5 hp
Inventory Reference R8903-5343 CLICK HERE FOR QUOTATION: onsrud pin horn router_model A1136_throat depth 24 inch_two spindle speeds 10000 and 20000_spindle drive 7.5 hp_Serial Number 8222



EKSTROM CARLSON PIN ROUTERS (Re-Built): R8903-

EKSTROM CARLSON PIN ROUTERS  Model 434
    29" throat
    Spindle Speeds10,000 and 20,000 rpm
    Spindle Drive 5 hp.
    Table 40" x 44"
Inventory Reference R8903-9963 CLICK HERE FOR QUOTATION ekstrom carlson pin router_model 434_spindle speeds 10000 and 20000 rpm_drive 5 hp_table 40 inch FB x 44 inch LR_Serial Number 434-441
 CLICK HERE FOR PHOTO ekstrom carlson pin router_model 434_throat depth 34 inch_two spindle speeds 10000 and 20000 rpm_motor drive 7.5 hp_tilting table 24 inch x 36 inch Photo  Please Note that photo is of another Rebuilt Ekstrom Carlson 434 just sold.
YOU MAY BUY Reconditioned at Great Saving or Buy a Rebuilt unit.



PORTER PIN ROUTER  Portermotion  *SPECIAL PRICE $2,500.00*
    Hydraulic Floating Spindle Head
    36" throat depth
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle drive 7.5 hp
    Table Size 40" x 48"
Inventory Reference R8903-9398



C.R. ONSRUD INVERTED SPINDLE ROUTERS
C.R. ONSRUD VERTICAL ROUTER  Model 00210   Mfg.  2001
Table Size 28.5" x 43.5"
Variable Spindle Speeds 12,000 thru 21,000 rpm.
Spindle Drive Motor 10 hp
Collet Capacity thru 3/4"
CONDITION Like New
Equipped with 1/4",  3/8", 1/2", and 3/4" Collets and Collet Nuts.
    (18) Off-set Guides Insets.   (1) Extra Table Open Insert.
Inventory Reference R8903-S3053-9647  CLICK HERE FOR QUOTATION cr onsrud inverted router_model 00210_variable spindle speeds from 12500 thru 25000 rpm_motor drive 10 hp_collet capacity 0.75 inch diameter_spindle adjustment variable_table size 31.5 inch x 43.5 inch_mfg date 2001_Serial Number 36010802
CLICK HERE FOR PHOTO cr onsrud inverted router_model 00210_variable spindle speeds from 12500 thru 25000 rpm_motor drive 10 hp_collet capacity 0.75 inch diameter_spindle adjustment variable_table size 31.5 inch x 43.5 inch_mfg date 2001_Serial Number 36010802_Left to Front View Photo Front view.    CLICK HERE FOR PHOTO cr onsrud inverted router_model 00210_variable spindle speeds from 12500 thru 25000 rpm_motor drive 10 hp_collet capacity 0.75 inch diameter_spindle adjustment variable_table size 31.5 inch x 43.5 inch_mfg date 2001_Serial Number 36010802_Right side view Photo Right side view.    CLICK HERE FOR PHOTO cr onsrud inverted router_model 00210_variable spindle speeds from 12500 thru 25000 rpm_motor drive 10 hp_collet capacity 0.75 inch diameter_spindle adjustment variable_table size 31.5 inch x 43.5 inch_mfg date 2001_Serial Number 36010802_Close up inside view spindle and Controls Photo View Spindle and controls.
CLICK HERE FOR PHOTO cr onsrud inverted router_model 00210_variable spindle speeds from 12500 thru 25000 rpm_motor drive 10 hp_collet capacity 0.75 inch diameter_spindle adjustment variable_table size 31.5 inch x 43.5 inch_mfg date 2001_Serial Number 36010802_Close up Operator Control Panel Photo Close up Operator Control Panel.    CLICK HERE FOR PHOTO cr onsrud inverter router_model 00210_spindle speed variable 12500 - 25000 rpm_drive 10 hp_collet thru 0.75 inch_table 28.5 inch x 43.5 inch_mfg 2001_Serial Number 36010802_Right side to Rear View_Spray Mist Lube Photo Right side to Rear View Spray Mist Lube.
CLICK HERE FOR PHOTO cr onsrud inverted router_model 00210_variable spindle speeds from 12500 thru 25000 rpm_motor drive 10 hp_collet capacity 0.75 inch diameter_spindle adjustment variable_table size 31.5 inch x 43.5 inch_mfg date 2001_Serial Number 36010802_Serial Number 36010802_Motor access door open Photo Motor access door open.  CLICK HERE FOR PHOTO cr onsrud inverted router_model 00210_variable spindle speeds from 12500 thru 25000 rpm_motor drive 10 hp_collet capacity 0.75 inch diameter_spindle adjustment variable_table size 31.5 inch x 43.5 inch_mfg date 2001_Serial Number 36010802_Close up drive motor Photo Close up drive motor.
CLICK HERE FOR PHOTO cr onsrud inverted router_model 00210_variable spindle speeds from 12500 thru 25000 rpm_motor drive 10 hp_collet capacity 0.75 inch diameter_spindle adjustment variable_table size 31.5 inch x 43.5 inch_mfg date 2001_Serial Number 36010802_Close Up Safety Shield - Mist Lube Photo Close Up Safety Shield - Mist Lube.
PLEASE NOTE THAT THIS UNIT JUST CAME OUT OF LONG TERM STORAGE,
 as it was a spare machine.



    RADIAL ARM ROUTERS & DRILLS, Mfg'd. by Ekstrom Carlson and Onsrud   R8903-

PLEASE NOTE: The R designates High Routing Spindle Head
                                    D designates High Speed Drilling Head

On this routers below they come equipped with following spindle hp:
           (5 hp 14,700 rpm)    (8 hp 15,000 rpm)    (10 hp 14700 rpm)



ONSRUD RADIAL ARM ROUTERS and DRILLS (Re-Built) R8903-

ONSRUD RADIAL ARM ROUTER  Model A1R   (One Arms)
    Arm Reach 84" centerline of spindle to centerline of column pivot
    Two pivoted section located on arm
    8 hp. Routing Spindle,  spindle speed 14,700 rpm
    Capable of over reaching on table approximate 48" x 72"
Inventory Reference R8903-1646 CLICK HERE FOR QUOTATION onsrud radial arm router_model A1R_single two segment arm_ reach 84 inch center of spindle to center of column_router drive 8 hp_router spindle speed 14500 rpm CLICK HERE FOR PHOTO: onsrud radial arm router_model A1R_single two segment arm_ reach 84 inch center of spindle to center of column_router drive 8 hp_router spindle speed 14500 rpm



ONSRUD RADIAL ARM ROUTER  Model A1ARR  (Two Arms)
    each Arm Reach 124" centerline of spindle to centerline of column pivot
    Three pivoted sections located on each arm
    one  5 hp  Router Spindle,  spindle speed 14,700 rpm
    one 10 hp Router Spindle, spindle speed 14,700 rpm
    Capable of over reaching on table, approximate 48" x 144"
Inventory Reference R8903-5351 CLICK HERE FOR QUOTATION onsrud radial arm routers_model A1ARR_two arms each with three segment_reach 124 inch center of spindle to center of column_two router spindles 8 hp and 10 hp_routers spindle speed 14700 rpm_Serial Number 36409



ONSRUD RADIAL ARM  DRILL   Model A1C    (Two Arms)
    each Arm Reach 84" centerline of spindle to centerline of column pivot.
    Two pivoted sections located on each arm
    two Drilling Heads  two spindle speeds 14,500  and 7430 rpm
    Capable of over reaching on table approximate 48" x 72"
Inventory Reference R8903-5355 CLICK HERE FOR QUOTATION onsrud radial arm drill_model A1C_two 2-segmented arms_reach 84 inch center of spindle to center of column_2- drill spindles each 1.5 hp_spindle speeds 7300 and 14000 rpm_Serial Number on Base 6169



ONSRUD RADIAL ARM ROUTER    Model A2RR   (One Arms)
    each Arm Reach 110" centerline of spindle to centerline of column pivot.
    Two pivoted section located on arm.
    one 8 hp. Router Spindle spindle speed 14,700 rpm
    Capable of over reaching on table approximate 48" x 144"
Inventory Reference R8903-10756



ONSRUD RADIAL ARM ROUTER  Model A2RR   (Two Arms)
    each Arm Reach 110" centerline of spindle to centerline of column pivot.
    Two pivoted sections located on each arm.
    one 8 hp  Router Spindle  spindle speed 14,700 rpm
    one  5 hp.  Router Spindle  spindle speed 14,700 rpm
    Capable of over reaching on table approximate 48" x 144"
Inventory Reference R8903-10987



ONSRUD RADIAL ARM ROUTER and DRILL  Model A2DR   (Two Arms)
    each Arm Reach 124" centerline of spindle to centerline of column pivot
    Three pivoted sections located on each arm
    one 8 hp Router Spindle, spindle speed 14,700 rpm.
    one 1 hp Clausing Drilling Head, variable spindle speed Speed 330 thru 4000 rpm.
    Capable of over reaching on table, approximate 48" x 120"
Inventory Reference  R8903-6904 CLICK HERE FOR QUOTATION onsrud radial arm router and drill_model A2DR_two three segmented arms_arm reach 124 inch center of spindle to center of column_1- router spindles 8 hp_spindle speed 14700 rpm_one drilling head_variable speed_Serial Number 10338



ONSRUD RADIAL ARM  DRILL   Model A2DD   (Two Arms)
    each Arm Reach 110" centerline of spindle to centerline of column pivot
    Two pivoted sections located on each arm
    two 1 hp & 1/2 hp Drilling Heads,  two spindle speeds 14,000  and 7300 rpm
    Capable of over reaching on table approximate 48" x 144"
Inventory Reference R8903-12079



ONSRUD RADIAL ARM DRILL   Model A2D  (One Arms)
    each Arm Reach 110" centerline of spindle to centerline of column pivot
    Two pivoted sections located on each arm
    one Drilling Heads 1 hp & 1/2 hp two spindle speeds 14,500  and 7430 rpm
    Capable of over reaching on table approximate 48" x 144"
  Inventory Reference R8903-13011



ONSRUD RADIAL ARM ROUTER  Model A4R   (One Arms)
    Arm Reach 124" centerline of spindle to centerline of column pivot
    Three pivoted section located on  arm
    one 8 hp  Router Spindle spindle speed 14,700 rpm.
    Capable of over reaching on table approximate 48" x 144"
Inventory Reference R8903-5349 CLICK HERE FOR QUOTATION onsrud radial arm router_model A4R_single arm each with three segments_reach 124 inch center of spindle to center of column_router spindle drive 5 hp_spindle speed 14700 rpm_voltage 360_250 cycles routing head_Serial Number 3848



ONSRUD RADIAL ARM ROUTER  Model A4AR   (One Arms)
    Arm Reach 124" centerline of spindle to centerline of column pivot.
    Three pivoted section located on  arm.
    one 8 hp Router Spindle, spindle speed 14,700 rpm.
    Capable of over reaching on table, approximate 60" x 168"
Inventory Reference R8903-11776



ONSRUD RADIAL ARM ROUTER   Model A4RR   (Two Arms)
    each Arm Reach 124" centerline of spindle to centerline of column pivot
    Three pivoted sections located on each arm
    one  5 hp Router Spindle spindle speed 14,700 rpm
    one 10 hp Router Spindle spindle speed 14700 rpm
    Capable of over reaching on table approximate 48" x 144"
Inventory Reference  R8903-5354   CLICK HERE FOR QUOTATION onsrud radial arm routers_model A1ARR_two arms each with three segment_reach 124 inch center of spindle to center of column_two router spindles 8 hp and 10 hp_each spindle speed 14700 rpm each_Serial Number 36409



ONSRUD RADIAL ARM  DRILL   Model A4DD   (Two Arms)
    each Arm Reach 124" centerline of spindle to centerline of column pivot
    Three pivoted sections located on each arm
    two Drilling Heads  two spindle speeds 14,500  and 7430 rpm.
    Capable of over reaching on table  approximate 48" x 144"
Inventory Reference R8903-5698 CLICK HERE FOR QUOTATION onsrud radial arm drill_model A4DD_ two three segmented arms_arm reach 124 inch center of spindle to center of column_ 2- drilling spindles each 1.5 hp_spindle speeds 7300 and 14000 rpm_Serial Number on Bbase 2491
Inventory Reference R8903-5699 CLICK HERE FOR QUOTATION onsrud radial arm drill_model A4DD_two 3-segmented arms_each with reach 124 inch center of spindle to center of column_two drill spindles each 1.5 hp_spindle speeds 7300 and 14000 rpm_Serial Number on Base 00091994

The above Routers are available with 5 thru 10 hp. drives  15,000 rpm.
          Single or Double Arms, Router on both Arms or Combination Router & Drill)



EKSTROM CARLSON RADIAL ARM ROUTERS and DRILLS
                                         (Re-Built)  R8903-
EKSTROM CARLSON RADIAL ARM ROUTER, Model V84  (One Arm)
    Arm Reach 84" centerline of spindle to centerline of column pivot.
    Two pivoted section located on arm.
    Spindle Drive Motor 5 hp   Spindle Speed 14,400 rpm
Inventory Reference R8903-1654

  

EKSTROM CARLSON RADIAL ARM ROUTER and DRILL    Model V109  (Two Arm)
    Arm Reach 109" centerline of spindle to centerline of column pivot
    Two pivoted sections located on each arm
    Router Spindle Drive Motor 5 hp., Spindle Speed 14,580 rpm
    Drill Head Spindle Speed Speed 14,500  and 7430 rpm
 Inventory Reference R8903-1655 CLICK HERE FOR PHOTO ekstrom carlson radial arm router and drill_model V109_arm reach 109 inch center of spindle to center of column_router drive 5 hp_routing spindle speed 14 580 rpm_ Drill Spindle two speeds 7430 rpm and 14500 rpm Photo



EKSTROM CARLSON RADIAL ARM ROUTER MILL   Model 480 (One Arm)
    Arm Reach 120" centerline of spindle to centerline of column pivot.
    Two pivoted sections located on arm
    one 15 hp. and 7½ Router Spindle  two-spindle speed 3600 and 7,200 rpm
    Spindle has six position depth stop
    Follower Guide vertical movement 8"
    Capable of over reaching on table  approximate 48" x 168"
 Inventory Reference  R8903-5642 CLICK HERE FOR QUOTATION ekstrom carlson radial router mill_ model 480_ one arms with two segment_arm reach 120 inch center of spindle to center of column_router spindles two speed 7.5 hp - 15 hp_router spindle speeds 3600 and 7200 rpm_Serial Number 59-125  
CLICK HERE FOR PHOTO ekstrom carlson radial router mill_ model 480_ one arms with two segment_arm reach 120 inch center of spindle to center of column_router spindles two speed 7.5 hp - 15 hp_router spindle speeds 3600 and 7200 rpm_Serial Number 59-125 Two photo's with-in. Use as example of finished router.


ROUTER SPINDLES, High Speed
and
 FREQUENCY CONVERTERS

LARGE SELECTION ROUTING SPINDLES: Sold As-Is or Re-built
"As-Is ROUTING SPINDLES are all in Very Good to Excellent Running Condition"

 

    ONSRUD Louis Allis HIGH SPEED ROUTING SPINDLE MOTOR 
8 HP           Out-put Speed  15,000 rpm
INPUT CYCLES 250                 INPUT VOLTAGE 230
Model 135-437      Frame Size 424,
                     Exterior Fan Mounted Above Head  
            Inventory Reference R8903-6221 CLICK HERE FOR PHOTO onsrud high speed routing spindle_ lewis allis_ model CMO_ 8 hp_ type 135-437_ spindle speed 15,000 rpm_ input voltage 230_ input cycles 250_ frame 424 Photo
            Our price $9,850.00


Email us your requirement at sales@centurymachinery.com


EKSTROM CARLSON ROUTER SPINDLE   5 Hp 15,000 rpm
        250 cycles  306 volts.


CONTINENTAL  ELECTRIC ROUTER SPINDLE  10 Hp  18,000 rpm
         300 cycles   450 volts


CONTINENTAL  ELECTRIC Routing Spindle  10 Hp  14,400 rpm
         240 cycles   360 volts


ONSRUD ROUTER SPINDLE   5 Hp  14,750 rpm
        240 cycles   220 volts and 440 volts


ONSRUD ROUTER SPINDLE   8 Hp   14,750 rpm
       250 cycles   230 volts


ONSRUD ROUTER SPINDLE  12½ Hp  11,200 rpm
      180 cycles    220 volts
         (also have 360 volts).


MARWIN  ROUTING SPINDLE, Multiple Hp. 15/10/9
         Three Speed Ranges  5,200 / 8750 / 10,400 rpm


"IF YOU DON'T SEE WHAT YOU NEED PLEASE CONTACT US"
Phone  1- 213-627-2847
Fax  1-213-627-2499
E-mail  sales@centurymachinery.com
"THANK YOU for taking the time to visit our web site "