Link back to Front Page: www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, CATEGORIES ARE IN ALPHABETICAL ORDER.

*SAWS, LAB, Precision,  Miter Single & Double Blade*
*SAWS, MITER, (Double & Single Blades)*
*SAW PANEL, CNC, Horizontal*
*SAWS PLATE, Cold, "Circular Blade"*
*SAWS PLATE, Vertical Band*
*SAWS, RADIAL ARM*
*SAWS, SCROLL, (JIG Type)*
*SAWS, SCROLL, (JIG Type) "New"*
*SAWS, TABLE*
*SAWS, TABLE: "New"*
*COMBINATION MACHINE: Table Saw, Drill, Lathe, & Sander*

 

Serving Industry for 83 years

"NEW" TANNEWITZ BAND SAWS, 30" thru 52"
"NEW" POWERMATIC  TABLE SAWS "Available


If you require a Quote Sheet PLEASE  send  us your requirements:
CENTURY logo
1937 South Santa Fe Avenue
Los Angeles, California 90021

  Website  www.centurymachinery.com
Email  sales@centurymachinery.com
Telephone 1-213-627-2847
Fax 1-213-627-2499
 

SAWS LAB: Precision, Miter
Single & Double Blade S0555-
SAWS COLD & CARBIDE: Mitering Cut: Ferrous & Non-Ferrous S0805- & S0825


CIRCULAR ABRASIVE CHOP SAWS Ref. S0555




CIRCULAR COLD & ABRASIVE SAWS Ref. S0805
▼        ▼           ▼

WAGNER CIRCULAR
COLD SAW   Model KWL-200

Capacity
3½" diameter
Blade Diameter 12"
Spindle Driven by 10 hp
Inventory Reference S0805-6827  CLICK HERE FOR QUOTATIO  wagner automatic cold saw_model KWL-200_capacity cut round stock 3.5 inch_blade diameter 12 inch_motor drive 10 hp_Serial Number 25551



BAILEIGH MITER CUTTING COLD SAW
Model CS-350P,      Serial Number 502140L     Mfg. 3/2007
SAW BLADE:  14
" (350x40mm)
SAW BLADE SPEEDS: two 26 rpm / 52 rpm
C
UTTING CAPACITY
   
Round, Tube at 90º straight up to.4.331" (110mm)
                              at 45º miter up to   2.953” (75mm)

  
 Square, Tube at 90º straight up to 4.25" x 4.25” (108mm x 108mm)
                              at 45º miter up to 2.953” x 2.953” (75mm x 60)

   
Rectangle Tube, at 90º straight up to 4.25" x 3.5" (108mm x 89mm)
                                    at 45º miter up to 2.953” x 2.326” (75mm x 60mm)

MITERING & MOVING VISE: allows horizontal angle cuts 0º- 45º
SLOTTING CAPABLE Right and Left
VISE: Pneumatic, Dual Action, Self-Centering, Controlled by Electric Foot
             Trip.
DRIVE MOTOR  Dual Hp. (Two Speeds).4.0 / 3.0 hp.
Coolant Pump 1/8 hp
New Cost as of 2016 IS $5,595.00
INVENTORY REFERENCE  S0805-10354 
CLICK HERE FOR QUOTATION  capacity 4.25" x 3.5" with 14” BAILEIGH CUTTING COLD SAW, Model CS-350P, Mfg 3/2007, SAW BLADE 14” (350x40mm), two SAW BLADE SPEEDS: 26 rpm / 52 rpm, CUTTING CAPACITY Round, Tube at 90º straight up to 4.331" (110mm) at 45º miter up to 	 2.953” (75mm), Round, Solid at 90º straight up to 2.362" (60mm) at 45º miter up to 1.575” (40mm), Square, Tube at 90º straight up to 4.25" x 4.25” (108mm x 108mm) at 45º miter up to  2.953” x 2.953” (75mm x 60), Rectangle Tube, at 90º straight up to 4.25" x 3.5" (108mm x 89mm) at 45º miter up to 2.953” x 2.326” (75mm x 60mm), SAW HEAD DOWN FEED Manually by Hand , HEAD MITER 90°, Slotting 45° Left / Right, MITERING & MOVING VISE: allows horizontal angle cuts  0º- 45º, SLOTTING CAPABLE Right and Left, VISE: Pneumatic, Dual Action, Self-Centering, Controlled by Electric Foot Trip. DRIVE 4 & 3 hp 220 volts, 3-phase,Coolant Pump 1/8 hp, CONTROLS: Controls Wired 115 volts, Power On/Off  trigger located on pull down bar, Blade 2-Speed Switch, Emergency Stop Bottom, EQUIPPED WITH Material Support Block. Coolant Pump & Pan, Serial Number 502140L
        CLICK HERE FOR PHOTO   capacity 4.25" x 3.5" with 14” BAILEIGH CUTTING COLD SAW, Model CS-350P, Mfg 3/2007, SAW BLADE 14” (350x40mm), two SAW BLADE SPEEDS: 26 rpm / 52 rpm, CUTTING CAPACITY Round, Tube at 90º straight up to 4.331" (110mm) at 45º miter up to 	 2.953” (75mm), Round, Solid at 90º straight up to 2.362" (60mm) at 45º miter up to 1.575” (40mm), Square, Tube at 90º straight up to 4.25" x 4.25” (108mm x 108mm) at 45º miter up to  2.953” x 2.953” (75mm x 60), Rectangle Tube, at 90º straight up to 4.25" x 3.5" (108mm x 89mm) at 45º miter up to 2.953” x 2.326” (75mm x 60mm), SAW HEAD DOWN FEED Manually by Hand , HEAD MITER 90°, Slotting 45° Left / Right, MITERING & MOVING VISE: allows horizontal angle cuts  0º- 45º, SLOTTING CAPABLE Right and Left, VISE: Pneumatic, Dual Action, Self-Centering, Controlled by Electric Foot Trip. DRIVE 4 & 3 hp 220 volts, 3-phase,Coolant Pump 1/8 hp, CONTROLS: Controls Wired 115 volts, Power On/Off  trigger located on pull down bar, Blade 2-Speed Switch, Emergency Stop Bottom, EQUIPPED WITH Material Support Block. Coolant Pump & Pan, Serial Number 502140L, Photo Front Photo Front view.     CLICK HERE FOR PHOTO  capacity 4.25" x 3.5" with 14” BAILEIGH CUTTING COLD SAW, Model CS-350P, Mfg 3/2007, SAW BLADE 14” (350x40mm), two SAW BLADE SPEEDS: 26 rpm / 52 rpm, CUTTING CAPACITY Round, Tube at 90º straight up to 4.331" (110mm) at 45º miter up to 	 2.953” (75mm), Round, Solid at 90º straight up to 2.362" (60mm) at 45º miter up to 1.575” (40mm), Square, Tube at 90º straight up to 4.25" x 4.25” (108mm x 108mm) at 45º miter up to  2.953” x 2.953” (75mm x 60), Rectangle Tube, at 90º straight up to 4.25" x 3.5" (108mm x 89mm) at 45º miter up to 2.953” x 2.326” (75mm x 60mm), SAW HEAD DOWN FEED Manually by Hand , HEAD MITER 90°, Slotting 45° Left / Right, MITERING & MOVING VISE: allows horizontal angle cuts  0º- 45º, SLOTTING CAPABLE Right and Left, VISE: Pneumatic, Dual Action, Self-Centering, Controlled by Electric Foot Trip. DRIVE 4 & 3 hp 220 volts, 3-phase,Coolant Pump 1/8 hp, CONTROLS: Controls Wired 115 volts, Power On/Off  trigger located on pull down bar, Blade 2-Speed Switch, Emergency Stop Bottom, EQUIPPED WITH Material Support Block. Coolant Pump & Pan, Serial Number 502140L, Photo Left Side to Front view. Photo Left Side to Front view.
CLICK HERE FOR PHOTO  capacity 4.25" x 3.5" with 14” BAILEIGH CUTTING COLD SAW, Model CS-350P, Mfg 3/2007, SAW BLADE 14” (350x40mm), two SAW BLADE SPEEDS: 26 rpm / 52 rpm, CUTTING CAPACITY Round, Tube at 90º straight up to 4.331" (110mm) at 45º miter up to 	 2.953” (75mm), Round, Solid at 90º straight up to 2.362" (60mm) at 45º miter up to 1.575” (40mm), Square, Tube at 90º straight up to 4.25" x 4.25” (108mm x 108mm) at 45º miter up to  2.953” x 2.953” (75mm x 60), Rectangle Tube, at 90º straight up to 4.25" x 3.5" (108mm x 89mm) at 45º miter up to 2.953” x 2.326” (75mm x 60mm), SAW HEAD DOWN FEED Manually by Hand , HEAD MITER 90°, Slotting 45° Left / Right, MITERING & MOVING VISE: allows horizontal angle cuts  0º- 45º, SLOTTING CAPABLE Right and Left, VISE: Pneumatic, Dual Action, Self-Centering, Controlled by Electric Foot Trip. DRIVE 4 & 3 hp 220 volts, 3-phase,Coolant Pump 1/8 hp, CONTROLS: Controls Wired 115 volts, Power On/Off  trigger located on pull down bar, Blade 2-Speed Switch, Emergency Stop Bottom, EQUIPPED WITH Material Support Block. Coolant Pump & Pan, Serial Number 502140L, Photo Rear to Left Side Photo Rear to Left Side.         CLICK HERE FOR PHOTO  capacity 4.25" x 3.5" with 14” BAILEIGH CUTTING COLD SAW, Model CS-350P, Mfg 3/2007, SAW BLADE 14” (350x40mm), two SAW BLADE SPEEDS: 26 rpm / 52 rpm, CUTTING CAPACITY Round, Tube at 90º straight up to 4.331" (110mm) at 45º miter up to 	 2.953” (75mm), Round, Solid at 90º straight up to 2.362" (60mm) at 45º miter up to 1.575” (40mm), Square, Tube at 90º straight up to 4.25" x 4.25” (108mm x 108mm) at 45º miter up to  2.953” x 2.953” (75mm x 60), Rectangle Tube, at 90º straight up to 4.25" x 3.5" (108mm x 89mm) at 45º miter up to 2.953” x 2.326” (75mm x 60mm), SAW HEAD DOWN FEED Manually by Hand , HEAD MITER 90°, Slotting 45° Left / Right, MITERING & MOVING VISE: allows horizontal angle cuts  0º- 45º, SLOTTING CAPABLE Right and Left, VISE: Pneumatic, Dual Action, Self-Centering, Controlled by Electric Foot Trip. DRIVE 4 & 3 hp 220 volts, 3-phase,Coolant Pump 1/8 hp, CONTROLS: Controls Wired 115 volts, Power On/Off  trigger located on pull down bar, Blade 2-Speed Switch, Emergency Stop Bottom, EQUIPPED WITH Material Support Block. Coolant Pump & Pan, Serial Number 502140L, Photo Close-up Vise Photo Close-up Vise.      CLICK HERE FOR PHOTO  capacity 4.25" x 3.5" with 14” BAILEIGH CUTTING COLD SAW, Model CS-350P, Mfg 3/2007, SAW BLADE 14” (350x40mm), two SAW BLADE SPEEDS: 26 rpm / 52 rpm, CUTTING CAPACITY Round, Tube at 90º straight up to 4.331" (110mm) at 45º miter up to 	 2.953” (75mm), Round, Solid at 90º straight up to 2.362" (60mm) at 45º miter up to 1.575” (40mm), Square, Tube at 90º straight up to 4.25" x 4.25” (108mm x 108mm) at 45º miter up to  2.953” x 2.953” (75mm x 60), Rectangle Tube, at 90º straight up to 4.25" x 3.5" (108mm x 89mm) at 45º miter up to 2.953” x 2.326” (75mm x 60mm), SAW HEAD DOWN FEED Manually by Hand , HEAD MITER 90°, Slotting 45° Left / Right, MITERING & MOVING VISE: allows horizontal angle cuts  0º- 45º, SLOTTING CAPABLE Right and Left, VISE: Pneumatic, Dual Action, Self-Centering, Controlled by Electric Foot Trip. DRIVE 4 & 3 hp 220 volts, 3-phase,Coolant Pump 1/8 hp, CONTROLS: Controls Wired 115 volts, Power On/Off  trigger located on pull down bar, Blade 2-Speed Switch, Emergency Stop Bottom, EQUIPPED WITH Material Support Block. Coolant Pump & Pan, Serial Number 502140L, Photo Close-up Saw Drive & Vise Photo Close-up Saw Drive & Vise.



HABERLE COMPOUND ANGLE CIRCULAR COLD SAW   Model H-90

Capacity
  Round 
4.5" diameter.   Square 4.1
  Rectangle Tube 2.5" x 7"
Blade Diameter 14"
TILTING HEAD
2-Cutting Speed Spindle Driven by 1.3 hp
Inventory Reference S0805-10001  CLICK HERE FOR QUOTATION  haberle cold saw_model H90_capacity up to 4.5 inch round_miter thu 60 degrees_square tube 4.1 inch_retange tube 2.5 inch x 7 inch_solid 4 inch_cuts compound angle_blade diameter 14 inch_motor drive kw 0.50 - 1.3_2-blade speed_coolant pump_Serial Number 110980485



CIRCULAR COLD SAWS Non Ferrous Ref. S0825
▼        ▼           ▼

KALTENBACH AUTOMATIC MITERING CIRCULAR COLD SAWING MACHINE
Model SKL400-NA,      Serial Number 117241,     Mfg’d 1994
SPECIFICATIONS
SAW BLADE DIAMETER 15¾", (400 mm)
CUTTING CAPACITY at 90 degrees
     Round  5.-7/64", (130 mm)      Square 4¾",  (120 mm)
Wide Sections 12.40" x 1.57" Thick, (315 mm x 40 mm)
CUTTING CAPACITY AT ± 45 degrees
         
Profiles Laying 5⅝" x 2⅜", (220 mm x 60 mm)   Profiles Standing 3-1/16" x 4¾", (80 mm x 120 mm)
CUTTING SPEEDS: Two Speed Ranges
SAW BLADE FEED, Infinitely Variable.
ADJUSTABLE CUT-OFF LENGTH Single & Double Stroke.
MATERIAL FEEDING SPEED 32.8 FPM, (10 m/min)
STOCK FEED (AUTOMATIC)
EQUIPPED WITH: Operator Control Station.
       Saw Enclosure Open & Close by Pneumatic Powered.  Operator Control Station.
       Mayfran Chip Conveyor.  Fosta Dust Collector.    Acculube Lubricant Dispenser.
Inventory Reference S0825-10018  CLICK HERE FOR QUOTATION  kaltenbach automatic circular mitering cold sawing machine_model SKL-400 NA_capacity 5.250 inch round_square 4.75 inch_rectangle or wide section 12 inch x 1.57 inch_cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch_blade diameter 15.75 inch_two cutting speed ranges_adjustable cut off length single & double stroke 0.4 inch thru 94.488 inch_auto stock feed_adjustable back fence_adjustable pneumatic clamping_equipped withfull point of operation enclosure_mayfram chip tote conveyor_fosta dust collection system_acculube lubricant dispenser_mfg 1994_Serial Number 117241_EXCELLENT CONDITION
CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Front view with point of operation enclosure closed Photo Front view with point of operation enclosure closed.      CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Point of Operation Enclosure Open Right Side to Front view Photo Point of Operation Enclosure Open Right Side to Front view.
          CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Front lower access doors open. Front lower access doors open.        CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Front lower access doors open. Photo Left Side to Front view with point of operation hood open.
CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Close-up point of operation. Photo Close-up point of operation.      CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Close-up Part in-feed carriage  Photo Close-up Part in-feed carriage.      CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Close-up point of operation. Photo Close-up point of operation.
         CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Close-up feed adjustment. Photo Close-up feed adjustment.     CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View in-feed end towards Part Carriage. Photo View in-feed end towards Part Carriage.    CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View Pneumatic Valves & Controls. Photo View Pneumatic Valves & Controls.
CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View inside of Electrical Controls Cabinet. Photo View inside of Electrical Controls Cabinet.    CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View of Over-All Saw from Right End to Front. Photo View of Over-All Saw from Right End to Front.
        CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View of Over-All Saw from Left End to Front. Photo View of Over-All Saw from Left End to Front.      CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View of Over-All Saw from Right End. Photo View of Over-All Saw from Right End.
CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Fosta Dust Collector. Photo Fosta Dust Collector.     CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Mayfran Chip Tote Conveyor. Photo Mayfran Chip Tote Conveyor.     CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Mfg. ID Tag. Photo Mfg. ID Tag.




 

SAWS, MITER (Double Blade)  S0860-


DeWALT RADIAL ARM SAW with Power Cross Feed
 
18" Diameter Blade Capacity
Miter at 45 degrees RIGHT & LEFT
Out Rip 38"
Cross Rip 13"
SAW BLADE MOTOR CROSS FEED  Power Feed
      Vari Feed Rate.  Adjustable saw carriage stops.
MOTOR DRIVE. 7½ hp.208-220/440 volts
Cross Cut Feed Motor DC volts
OPERATOR CONTROLS mounted on front of arm
EQUIPPED WITH:
       1-Saw Blade carbide tipped.
RADIAL SAW IS MOUNTED ON BED FRAME and is equipped with independent 
   Pneumatic Part In-Feed Shuttle with clamping.     Radial Arm Saw and Columns
   are attached to bed frame and can adjust longitudinally with-in guiderails.
Distance between saws 103
Inventory Reference S1203-4037-10224  CLICK HERE FOR QUOTATION  18 inch diameter blade DeWALT RADIAL ARM SAW with Power Cross Feed, Miter at 45 degrees RIGHT & LEFT, Out Rip 38", Cross Rip 13", SAW BLADE MOTOR CROSS FEED  Power Feed Vari Feed Rate.  Adjustable saw carriage stops, MOTOR DRIVE 7½ hp, Cross Cut Feed Motor DC volts, OPERATOR CONTROLS mounted on front of arm, EQUIPPED WITH 1-Saw Blade carbide tipped, RADIAL SAW IS MOUNTED ON BED FRAME and is equipped with independent  Pneumatic Part In-Feed Shuttle with clamping. Radial Arm Saw and  Columns are attached to bed frame and can adjust longitudinally with-in guiderails,Distance between saws 103
Two RADIAL ARM SAWS mounted on same base with Part in-feed table between.
and one saw has Power Feed on saw head




 

SAW, PANEL: CNC, Horizontal S1098-

CHALLONER MEDALIST HORIZONTAL CNC SHEET PANEL SAW
Capacity Sheet 10½ feet

Blade Diameter 16"
Equipped with Part Infeed and Outfeed
    Air Sheet Lift Tables

"Very Little Use"
Inventory ReferenceS1098-7036  CLICK HERE FOR QUOTATION  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340
       CLICK HERE FOR PHOTO  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340_Front View
Saw Front View        Left to Right View Saw  CLICK HERE FOR PHOTO  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340_Left to Right Front View
CLICK HERE FOR PHOTO  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340_End View Close up Eagle Eye(2 photo) 2-Photo's Side View Saw & Close Up Eagle Eye Safety Curtain
        CLICK HERE FOR PHOTO  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340_CNC Controls CNC Control              Feed Unite & Table  CLICK HERE FOR PHOTO  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340_Feed Table (2 photos)
CLICK HERE FOR PHOTO  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340_(3) Air Lift Tables 3-Air Lift Tables        2-Roller Tables  CLICK HERE FOR PHOTO  challoner medalist CNC panel saw_capacity cut 10 feet wide_blade diameter 16 inch_capacity between upright 126 inch_blade drive 15 hp_inch - metric calabration_in-feed and out-feed_Serial Number MS72340_(2) Roller Tables

                                                                          
MOVING OUT OF WAREHOUSE DISCOUNTED PRICE
             
 $2,500.00






 

SAW, PLATE: Cold, "Circular Blade"   S1154-


KALTENBACH AUTOMATIC
MITERING CIRCULAR COLD SAWING MACHINE
Model SKL400-NA,      Serial Number 117241,     Mfg’d 1994
SPECIFICATIONS
SAW BLADE DIAMETER 15¾", (400 mm)
CUTTING CAPACITY at 90 degrees
     Round  5.-7/64", (130 mm)      Square 4¾",  (120 mm)
Wide Sections 12.40" x 1.57" Thick, (315 mm x 40 mm)
CUTTING CAPACITY AT ± 45 degrees
         
Profiles Laying 5⅝" x 2⅜", (220 mm x 60 mm)   Profiles Standing 3-1/16" x 4¾", (80 mm x 120 mm)
CUTTING SPEEDS: Two Speed Ranges
SAW BLADE FEED, Infinitely Variable.
ADJUSTABLE CUT-OFF LENGTH Single & Double Stroke.
MATERIAL FEEDING SPEED 32.8 FPM, (10 m/min)
STOCK FEED (AUTOMATIC)
EQUIPPED WITH: Operator Control Station.
       Saw Enclosure Open & Close by Pneumatic Powered.  Operator Control Station.
       Mayfran Chip Conveyor.  Fosta Dust Collector.    Acculube Lubricant Dispenser.
Inventory Reference S0825-10018  CLICK HERE FOR QUOTATION  kaltenbach automatic circular mitering cold sawing machine_model SKL-400 NA_capacity 5.250 inch round_square 4.75 inch_rectangle or wide section 12 inch x 1.57 inch_cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch_blade diameter 15.75 inch_two cutting speed ranges_adjustable cut off length single & double stroke 0.4 inch thru 94.488 inch_auto stock feed_adjustable back fence_adjustable pneumatic clamping_equipped withfull point of operation enclosure_mayfram chip tote conveyor_fosta dust collection system_acculube lubricant dispenser_mfg 1994_Serial Number 117241_EXCELLENT CONDITION
CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Front view with point of operation enclosure closed Photo Front view with point of operation enclosure closed.      CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Point of Operation Enclosure Open Right Side to Front view Photo Point of Operation Enclosure Open Right Side to Front view.
          CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Front lower access doors open. Front lower access doors open.        CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Front lower access doors open. Photo Left Side to Front view with point of operation hood open.
CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Close-up point of operation. Photo Close-up point of operation.      CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Close-up Part in-feed carriage  Photo Close-up Part in-feed carriage.      CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Close-up point of operation. Photo Close-up point of operation.
         CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Close-up feed adjustment. Photo Close-up feed adjustment.     CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View in-feed end towards Part Carriage. Photo View in-feed end towards Part Carriage.    CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View Pneumatic Valves & Controls. Photo View Pneumatic Valves & Controls.
CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View inside of Electrical Controls Cabinet. Photo View inside of Electrical Controls Cabinet.    CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View of Over-All Saw from Right End to Front. Photo View of Over-All Saw from Right End to Front.
        CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View of Over-All Saw from Left End to Front. Photo View of Over-All Saw from Left End to Front.      CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo View of Over-All Saw from Right End. Photo View of Over-All Saw from Right End.
CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Fosta Dust Collector. Photo Fosta Dust Collector.     CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Mayfran Chip Tote Conveyor. Photo Mayfran Chip Tote Conveyor.     CLICK HERE FOR PHOTO  kaltenbach automatic circular mitering cold sawing machine, model SKL-400 NA, capacity 5.250 inch round, square 4.75 inch, rectangle or wide section 12 inch x 1.57 inch, cutting capacity at 45 degrees laying 5.625 inch x 2.375 inch & standing 3.062 inch x 4.75 inch, blade diameter 15.75 inch, two cutting speed ranges, adjustable cut off length single & double stroke 0.4 inch thru 94.49 inch, auto stock feed, adjustable back fence, adjustable pneumatic clamping, equipped withfull point of operation enclosure, mayfram chip tote conveyor, fosta dust collection system, acculube lubricant dispenser, mfg 1994, Serial Number 117241, EXCELLENT CONDITION, Photo Mfg. ID Tag. Photo Mfg. ID Tag.






 

SAWS, PLATE, Vertical Band    S1170-

SORRY NONE AT THIS TIME




 

SAWS, RADIAL ARM  S1203-


DELTA ROCKWELL
RADIAL ARM SAW
   16" Diameter Blade Capacity

Cross Rip 14"
Out Rip 34"
Motor drive 5 hp
Equipped with Dato Blades
Inventory Reference S1203-9515  CLICK HERE FOR QUOTATION  16 inch diameter blade delta rockwell radial arm saw, motor drive 5 hp, cross rip 14 inch, outrip 34 inch, with one saw blade and dato set, Serial Number BS8907



DEWALT RADIAL ARM SAW  Model GE
   16" Diameter Blade Capacity

Cross Rip 24"
Out Rip 38"
Motor drive 7
½ hp
Equipped with:
  one16" diameter carbide tip saw blade.
Inventory Reference S1203-10238  CLICK HERE FOR QUOTATION  16 inch diameter blade dewalt radial arm saw, capacity blade 16 inch diameter model GE, motor drive 7.5 hp, cross rip 24 inch, out rip 38 inch, with one 16 inch diameter carbide tip saw blade, Serial Number 114721


DeWALT RADIAL ARM SAW with Power Cross Feed
 
18" Diameter Blade Capacity
Miter at 45 degrees RIGHT & LEFT
Out Rip 38"
Cross Rip 13"
SAW BLADE MOTOR CROSS FEED  Power Feed
      Vari Feed Rate.  Adjustable saw carriage stops.
MOTOR DRIVE.
7½ hp.208-220/440 volts
Cross Cut Feed Motor DC volts
OPERATOR CONTROLS mounted on front of arm
EQUIPPED WITH:
       1-Saw Blade carbide tipped.

Inventory Reference S1203-4037-10224  CLICK HERE FOR QUOTATION  18 inch diameter blade DeWALT RADIAL ARM SAW with Power Cross Feed, Miter at 45 degrees RIGHT & LEFT, Out Rip 38", Cross Rip 13", SAW BLADE MOTOR CROSS FEED  Power Feed Vari Feed Rate.  Adjustable saw carriage stops, MOTOR DRIVE 7½ hp, Cross Cut Feed Motor DC volts, OPERATOR CONTROLS mounted on front of arm, EQUIPPED WITH 1-Saw Blade carbide tipped, RADIAL SAW IS MOUNTED ON BED FRAME and is equipped with independent  Pneumatic Part In-Feed Shuttle with clamping. Radial Arm Saw and  Columns are attached to bed frame and can adjust longitudinally with-in guiderails,Distance between saws 103




                                     
ORIGINAL RADIAL ARM SAW
 
20" Diameter Blade Capacity
Arm Length 44"

Miter at 45 degrees RIGHT & LEFT
Out Rip 40
¾"      Cross Rip 24"
Depth of Cut 4⅜"
MOTOR DRIVE. 7½ hp.208-220/440 volts
Cross Cut Feed Motor DC volts
OPERATOR CONTROLS mounted on front of arm
EQUIPPED WITH:
       1-20" diameter Saw Blade carbide tipped.
Inventory Reference S1203-10324  CLICK HERE FOR QUOTATION  ORIGINAL RADIAL ARM SAW 20" Diameter Blade Capacity, Arm Length 44", Miter at 45 degrees RIGHT & LEFT, Out Rip 40¾", Cross Rip 24", Depth of Cut 4⅜", MOTOR DRIVE. 7½ hp.208-220/440 volts, Cross Cut Feed Motor DC volts, OPERATOR CONTROLS mounted on front of arm, EQUIPPED WITH 20" diameter Saw Blade carbide tipped   CLICK HERE FOR PHOTO  ORIGINAL RADIAL ARM SAW 20" Diameter Blade Capacity, Arm Length 44", Miter at 45 degrees RIGHT & LEFT, Out Rip 40¾", Cross Rip 24", Depth of Cut 4⅜", MOTOR DRIVE. 7½ hp.208-220/440 volts, Cross Cut Feed Motor DC volts, OPERATOR CONTROLS mounted on front of arm, EQUIPPED WITH 20" diameter Saw Blade carbide tipped, Photo Front view Photo Front view.      
    
CLICK HERE FOR PHOTO  ORIGINAL RADIAL ARM SAW 20" Diameter Blade Capacity, Arm Length 44", Miter at 45 degrees RIGHT & LEFT, Out Rip 40¾", Cross Rip 24", Depth of Cut 4⅜", MOTOR DRIVE. 7½ hp.208-220/440 volts, Cross Cut Feed Motor DC volts, OPERATOR CONTROLS mounted on front of arm, EQUIPPED WITH 20" diameter Saw Blade carbide tipped, Photo Close-up Saw Motor and Arm Photo Close-up Saw Motor and Arm.          CLICK HERE FOR PHOTO  ORIGINAL RADIAL ARM SAW 20" Diameter Blade Capacity, Arm Length 44", Miter at 45 degrees RIGHT & LEFT, Out Rip 40¾", Cross Rip 24", Depth of Cut 4⅜", MOTOR DRIVE. 7½ hp.208-220/440 volts, Cross Cut Feed Motor DC volts, OPERATOR CONTROLS mounted on front of arm, EQUIPPED WITH 20" diameter Saw Blade carbide tipped, Photo Right Side view Photo Right Side view.
CLICK HERE FOR PHOTO  ORIGINAL RADIAL ARM SAW 20" Diameter Blade Capacity, Arm Length 44", Miter at 45 degrees RIGHT & LEFT, Out Rip 40¾", Cross Rip 24", Depth of Cut 4⅜", MOTOR DRIVE. 7½ hp.208-220/440 volts, Cross Cut Feed Motor DC volts, OPERATOR CONTROLS mounted on front of arm, EQUIPPED WITH 20" diameter Saw Blade carbide tipped, Photo Rear to Right Side view Photo Rear to Right Side view.




 

 SAW, SCROLL (JIG Type) S1018-

OLIVER SCROLL SAW, JIG SAW, Model 273-D
    Throat Depth 36",
    Height Under Guide 10"
    Table  Size 34" x 34",  Tilts Right & left 30 degrees
Motor Drive 2 hp. 230/460 volts
Inventory Reference S1018-9253
CLICK HERE FOR QUOTATION  36 inch throat depth oliver scroll jig saw, model 273-D, hieght under blade guide 10 inch, tilting table 34 inch x 34 inch and tilts 30 degrees left and right, motor drive 2 hp, with air pump, Serial Number 206157 
CLICK HERE FOR PHOTO   36 inch throat depth oliver scroll jig saw, model 273-D, hieght under blade guide 10 inch, tilting table 34 inch x 34 inch and tilts 30 degrees left and right, motor drive 2 hp, with air pump, Serial Number 206157
    
"Website discounted price $2450.00"
 


For quotes    Please
    Call 1-213-627-2847
   
Fax  1- 213-627-2499
    or E-mail us at
sales@centurymachinery.com





 

SAWS,TABLE  


OLIVER
TILTING ARBOR TABLE SAW   Model 232-D
     Blade Diameter up to 14"
Capacity:
    Blade projects
2⅜"
    Width to cut on:
                              Left side of blade (In-front) 15½
"
                              Right side of blade (To rear) 46
"
3 hp  direct motor drive to blade
Bed Over-all Size
33¾" x 34⅝"
Bed Extension for Peg Rip Fence 29½
"
length
Equipped with:
 1-Over head Swing Down Blade Guard.
 1-Oliver Rip Fence (Peg Type)
 1-Miter Gauge.
 1- Carbide Tip Saw Blade

Inventory Reference S1402-10382  CLICK HERE FOR QUOTATION  oliver tilting arbor table saw, model 232-D, capacity blade 14 inch, capacity width to cut in front of blade 15.5 inch and at rear of blade 46 inch,motor direct drive 3 hp, with peg rip fence, miter gage, blade guard with anti kick back, Serial Number 97544



OLIVER TILTING ARBOR Rolling Top TABLE SAW   Model 88-D
     Blade Diameter up to 18"
Capacity:
    Blade projects 4¾
"
    Width to cut on:
                              Left side of blade (In-front) 17
"
                              Right side of blade (To rear) 52
"
    Cross Cut 32
"
5 hp  direct motor drive to blade
ROLLING TOP TABLE 17½
" x 44½"
Bed Over-all Size
41½" x 44½"
Bed Extension for Peg Rip Fence 36
"
length x 21⅝"
Equipped with:
 1-Over head Swing Down Blade Guard.
 1-Oliver Rip Fence (Peg Type)
 1-Miter Gauge.
 1- Saw Blade

Inventory Reference S1402-10378  CLICK HERE FOR QUOTATION  oliver rolling top tilting arbor table saw, model 88-D, capacity blade 18" x 4.75" projects, capacity width to cut in front of blade 17" and at rear of blade 52",roll top table 17.5" wide direct drive 5 hp motor, with peg rip fence, miter gage, blade guard with anti kick back, Serial Number 96445



 

Several In Stock
TABLE SAW RIP FENCES, Peg Type
FITS Oliver Table Saws and Tannewitz Table Saw

FOR QUOTES
Call 1-213-627-2847
Email
sales@centurymachinery.com


Optional Accessories available
For quotes  Please
    Call 1-213-627-2847
   
Fax  1- 213-627-2499
    or E-mail us at 
  sales@centurymachinery.com





 

SAWS, MISCELLANEOUS

  AERO QUIP HOSE CUT OFF SAW
    Capacity Hose 4 thru 40

    Blade diameter 14"
Inventory Reference C8006-6701


 

DUST COLLECTORS
▼                            ▼

MICRO AIR FILTER and FAN

Model MT800
Mounted on wheels
Motor Drive 1/4 hp. 115 volts
Inventory Reference A2980-9180 CLICK HERE FOR PHOTO micro air filter and fan_model MT800_mounted on wheels_motor drive 0.250 hp_115 volts



REESE SELF CONTAINED DUST COLLECTOR
Can be used with Metal Grinder
Model 5.4-60
Hopper Type
Exhaust Cubic Feet Per Minute 1100 cfm
Filter Medium Cloth Bags
Motor drive 3/4 hp 230/460 volts
Inventory Reference D8300-9536 CLICK HERE FOR QUOTATION  reese dust collector_model 5-4-60_self contained_cubic feet per minute 1100 cfm_filter medium cloth bages_inlet opening 3 inch_drive 0.75 hp_Serial Number 11478-1



AGET DUSTKOP DUST COLLECTOR
Can be used with Metal Grinder
Series 800,  Model 8N50,   Serial Number 541
CENTRIFUGAL SEPARATOR
FILTER MEDIUM: Dry Type, Wire Mesh
RATINGS, 200 TO 900 C.F.M. at 5.25” to 2” W.G
RECOMMENDED OPERATING RANGE, 300 TO 700 C.F.M. at 5.25”
With
DUST STORAGE: Pull-Out Drawer: Capacity 3.4 Cubic Feet
     
1-After Filter located on top of cyclone
      1-Section Inlet duct with Suction Shut Off 
Inventory Reference   D8300-9535-1B  CLICK HERE FOR QUOTATION  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541
CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541   CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541  CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541  CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541  View of unit.

 aget dustkop dust collector, series 800, model 8N50, ratings 200 - 900 cfm at 5.25 inch to 2 inch MG, with pull-out storage bin, motor drive 0.75 hp, Serial Number 541
CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541 Photo  CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541 Photo  CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541 Photo  CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541 Photo View of unit.
 

THIS IS JUST A SMALL SELECTION OF OUR BAND SAWS
*PLEASE SEND US YOUR CUTTING REQUIREMENTS*

Phone 1- 213-627-2847     Fax  1-213-627-2499     or
E-Mail us at    sales@centurymachinery.com
"THANK YOU for taking the time to visit our web site"

"THANK YOU for taking the time to visit our website"