Link back to Home Page► www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, PRESSES & PUNCHES CATEGORIES ARE IN ALPHABETICAL ORDER.▬▬►

*AIR PRESS*
*ARBOR PRESS*
*C-FRAME GAP Air FORMING & PUNCH Press*
*C-FRAME GAP Hydraulic Presses*
*CLICKER or DIE PRESS*
*
FABRICATORS & TURRET PUNCHES*
*FOUR POST Hydraulic Presses, HOBBING PRESS &  MOLDING PRESSES*  *DIE TRYOUT & SPOTTING PRESS*
*FLUID FORMING PRESSES Verson Wheelon*
*HYDROFORM  PRESSES, FLUID FORMING Cincinnati
Verson, Avure (Asea Quintus) 
    CAVITY FORMING _MALE DIE FORMING
*

Serving Industry for 83 years

If you require a Quote Sheet PLEASE  send  us your requirements:
CENTURY logo
1937 South Santa Fe Avenue
Los Angeles, California 90021

Email  sales@centurymachinery.com
Website  www.centurymachinery.com
Telephone 1-213-627-2847

Fax 1-213-627-2499

 
 

 PUNCH PRESS ACCESSORIES:
Air Feeds, Straighteners, & Coil Reels

COIL MATIC SINGLE END POWER UNCOILER REEL
Model PR3-3054-A
SPECIFICATIONS
    
Coil Capacity 6000 LBS.
    
Coil Width, Maximum 30"
     Coil Outside Diameter, Maximum 54"
     Range of Coil Inside Diameter10" thru 20"
     Infinitely Variable 5 thru 150 FPM
VARI DRIVE: Motor 2 hp
EQUIPPED WITH:
     Self Centering. Three Arm Style Mandrels.
     Three Keepers.
Inventory Reference R1903-10256 6000 lbs COIL MATIC SINGLE END POWER UNCOILER REEL, Model PR3-3054-A, Coil Capacity 6000 LBS, Coil Width, Maximum 30", Coil Outside, Diameter, Maximum 54", Range of Coil Inside Diameter10" thru 20" Infinitely Variable 5 thru 150 FPM, VARI DRIVE: Motor 2 hp, EQUIPPED WITH Self Centering, Three Arm Style Mandrels, Three Keepers, Serial Number 87821
6000 lbs COIL MATIC SINGLE END POWER UNCOILER REEL, Model PR3-3054-A, Coil Capacity 6000 LBS, Coil Width, Maximum 30", Coil Outside, Diameter, Maximum 54", Range of Coil Inside Diameter10" thru 20" Infinitely Variable 5 thru 150 FPM, VARI DRIVE: Motor 2 hp, EQUIPPED WITH Self Centering, Three Arm Style Mandrels, Three Keepers, Serial Number 87821, Photo right side view with controls Photo right side view with controls.    6000 lbs COIL MATIC SINGLE END POWER UNCOILER REEL, Model PR3-3054-A, Coil Capacity 6000 LBS, Coil Width, Maximum 30", Coil Outside, Diameter, Maximum 54", Range of Coil Inside Diameter10" thru 20" Infinitely Variable 5 thru 150 FPM, VARI DRIVE: Motor 2 hp, EQUIPPED WITH Self Centering, Three Arm Style Mandrels, Three Keepers, Serial Number 87821, Photo End view Arms Photo End view Arms.
   6000 lbs COIL MATIC SINGLE END POWER UNCOILER REEL, Model PR3-3054-A, Coil Capacity 6000 LBS, Coil Width, Maximum 30", Coil Outside, Diameter, Maximum 54", Range of Coil Inside Diameter10" thru 20" Infinitely Variable 5 thru 150 FPM, VARI DRIVE: Motor 2 hp, EQUIPPED WITH Self Centering, Three Arm Style Mandrels, Three Keepers, Serial Number 87821, Photo End to Right Side view Arms and Keepers. Photo End to Right Side view Arms
and Keepers.
6000 lbs COIL MATIC SINGLE END POWER UNCOILER REEL, Model PR3-3054-A, Coil Capacity 6000 LBS, Coil Width, Maximum 30", Coil Outside, Diameter, Maximum 54", Range of Coil Inside Diameter10" thru 20" Infinitely Variable 5 thru 150 FPM, VARI DRIVE: Motor 2 hp, EQUIPPED WITH Self Centering, Three Arm Style Mandrels, Three Keepers, Serial Number 87821, Photo close-up ID Tag. Photo close-up ID Tag
Please Note you may wish to purchase the Coil-Matic Air Feeder & Straightener to go with this unit.


 

COMBINATION FEEDER AND STRAIGHTENER
▼               ▼               ▼               ▼

COIL-MATIC AIR STOCK FEEDER and STRAIGHTENER
          Model XHF-3012
SPECIFICATIONS AIR FEEDER
     Stock Width 30
"Maximum
    
Stroke Range 0 thru 12"
    
Stock Thickness 0.061"
     Stroke Cycles per minute at maximum stroke 45
         Pneumatic Driven Stock Gripper
SPECIFICATIONS STRAIGHTENING PINCH ROLLS
     Five Rolls (2 over 3) each roll diameter 2
"
EQUIPPED WITH:
    Stroke Length Adjustable via hand crank.
    Manual Top Straightening Roll adjustment.
    Stock Edge Guide.
    Infeed Skate Conveyor 24" x 24"
    Mounted on Portable Frame with Height Adjustment.
    Inlet Air Filter and Oiler.
Inventory Reference S7748-10257  COIL-MATIC AIR STOCK FEEDER and STRAIGHTENER Model XHF-3012, STOCK WIDTH 30" maximum, STROKE, RANGE12", STOCK THICKNESS 0.061", STROKE Cycles per minute at maximum stroke 45  Pneumatic Driven Stock Gripper and One Holding Gripper, STRAIGHTENING PINCH ROLLS 5 (2 over 3) diameter of each roll 2", EQUIPPED WITH Stroke Length Adjustable via hand crank, Manual Top, Straightening Roll adjustment, Stock Edge Guide, Infeed Skate Conveyor 24" x 24", Mounted on Portable Frame with Height Adjustment,  Inlet Air Filter and Oiler, Height Floor to top of infeed Conveyor 45"
  PLEASE NOTE photos of Rowe Feeder & Straightener  taken prior to unit being clea
         COIL-MATIC AIR STOCK FEEDER and STRAIGHTENER Model XHF-3012, STOCK WIDTH 30" maximum, STROKE, RANGE12", STOCK THICKNESS 0.061", STROKE Cycles per minute at maximum stroke 45  Pneumatic Driven Stock Gripper and One Holding Gripper, STRAIGHTENING PINCH ROLLS 5 (2 over 3) diameter of each roll 2", EQUIPPED WITH Stroke Length Adjustable via hand crank, Manual Top, Straightening Roll adjustment, Stock Edge Guide, Infeed Skate Conveyor 24" x 24", Mounted on Portable Frame with Height Adjustment,  Inlet Air Filter and Oiler, Height Floor to top of infeed Conveyor 45", Photo end view Gripper- Conveyor and portable stand with height adjustment Photo end view Gripper- Conveyor and portable stand with height adjustment.

 COIL-MATIC AIR STOCK FEEDER and STRAIGHTENER Model XHF-3012, STOCK WIDTH 30" maximum, STROKE, RANGE12", STOCK THICKNESS 0.061", STROKE Cycles per minute at maximum stroke 45  Pneumatic Driven Stock Gripper and One Holding Gripper, STRAIGHTENING PINCH ROLLS 5 (2 over 3) diameter of each roll 2", EQUIPPED WITH Stroke Length Adjustable via hand crank, Manual Top, Straightening Roll adjustment, Stock Edge Guide, Infeed Skate Conveyor 24" x 24", Mounted on Portable Frame with Height Adjustment,  Inlet Air Filter and Oiler, Height Floor to top of infeed Conveyor 45", Photo close-up Gripper- Conveyor and portable stand with height adjustment Photo close-up Gripper- Conveyor and portable stand with height adjustment.
        COIL-MATIC AIR STOCK FEEDER and STRAIGHTENER Model XHF-3012, STOCK WIDTH 30" maximum, STROKE, RANGE12", STOCK THICKNESS 0.061", STROKE Cycles per minute at maximum stroke 45  Pneumatic Driven Stock Gripper and One Holding Gripper, STRAIGHTENING PINCH ROLLS 5 (2 over 3) diameter of each roll 2", EQUIPPED WITH Stroke Length Adjustable via hand crank, Manual Top, Straightening Roll adjustment, Stock Edge Guide, Infeed Skate Conveyor 24" x 24", Mounted on Portable Frame with Height Adjustment,  Inlet Air Filter and Oiler, Height Floor to top of infeed Conveyor 45", Photo side view Gripper Stroke cylinder and adjustment control Photo close-up side view Gripper Stroke cylinder and adjustment control.
 COIL-MATIC AIR STOCK FEEDER and STRAIGHTENER Model XHF-3012, STOCK WIDTH 30" maximum, STROKE, RANGE12", STOCK THICKNESS 0.061", STROKE Cycles per minute at maximum stroke 45  Pneumatic Driven Stock Gripper and One Holding Gripper, STRAIGHTENING PINCH ROLLS 5 (2 over 3) diameter of each roll 2", EQUIPPED WITH Stroke Length Adjustable via hand crank, Manual Top, Straightening Roll adjustment, Stock Edge Guide, Infeed Skate Conveyor 24" x 24", Mounted on Portable Frame with Height Adjustment,  Inlet Air Filter and Oiler, Height Floor to top of infeed Conveyor 45", Photo End view with Straightener, Stroke Control and Height adjustment control. Photo End view with Straightener, Stroke Control and Height adjustment control.

Please Note you may wish to purchase the Coil-Matic 6000 lbs Uncoiler to go with this unit.




ROWE STOCK STRAIGHTENER AND FEEDER 
Model S-15M
CAPACITY STRAIGHTENER
     Width  15" x Thickness,
     Maximum Mild Steel 0.30" thru 0.125"
ROLLS SPEED, Variable  35 thru 100 fpm,
MOTOR DRIVE 2 H.P.

Controls Model MBRM-215.

Inventory Reference S7748-9485  ROWE STOCK STRAIGHTENER AND FEEDER  Model S-15m, Controls Model MBRM-215. CAPACITY STRAIGHTENER Width  15" x Thickness, Maximum Mild Steel 0.30" thru 0.125". ROLLS SPEED, Variable  35 thru 100 fpm, MOTOR DRIVE 2 H.P.  
 ROWE STOCK STRAIGHTENER AND FEEDER  Model S-15m, Controls Model MBRM-215. CAPACITY STRAIGHTENER Width  15" x Thickness, Maximum Mild Steel 0.30" thru 0.125". ROLLS SPEED, Variable  35 thru 100 fpm, MOTOR DRIVE 2 H.P, Photo Operator Control Side view Photo Operator Controls Side view.

      ROWE STOCK STRAIGHTENER AND FEEDER  Model S-15m, Controls Model MBRM-215. CAPACITY STRAIGHTENER Width  15" x Thickness, Maximum Mild Steel 0.30" thru 0.125". ROLLS SPEED, Variable  35 thru 100 fpm, MOTOR DRIVE 2 H.P, Photo Infeed to Control side Photo Infeed to Operator Control side         ROWE STOCK STRAIGHTENER AND FEEDER  Model S-15m, Controls Model MBRM-215. CAPACITY STRAIGHTENER Width  15" x Thickness, Maximum Mild Steel 0.30" thru 0.125". ROLLS SPEED, Variable  35 thru 100 fpm, MOTOR DRIVE 2 H.P, Photo Operator Control Side view to Out-Feed End Photo Operator Control Side view to Out-Feed End

  ROWE STOCK STRAIGHTENER AND FEEDER  Model S-15m, Controls Model MBRM-215. CAPACITY STRAIGHTENER Width  15" x Thickness, Maximum Mild Steel 0.30" thru 0.125". ROLLS SPEED, Variable  35 thru 100 fpm, MOTOR DRIVE 2 H.P, Photo Right End to Controls lCabinet at rear Photo Right End to Controls Cabinet at rear.




COMBINATION FEEDER AND STRAIGHTENER
HEBBLE Rack "N" Roll, PUNCH PRESS FEEDER
    Capacity 2" wide
   connected to COOPER WEYMOUTH STOCK STRAIGHTENER  7 Rolls

Inventory Reference F0854-4033  stock straightener and hebble punch press feeder, cooperweymouth_capacity material 2.5 inch wide with 7 rolls_Serial Numbers 2567258 and 2099   stock straightener and hebble punch press feeder, cooperweymouth_capacity material 2.5 inch wide with 7 rolls_Serial Numbers 2567258 and 2099  stock straightener and hebble punch press feeder, cooperweymouth_capacity material 2.5 inch wide with 7 rolls_Serial Numbers 2567258 and 2099








AIR PRESS     P3626-












 

 

ARBOR PRESSES     P5648-





 

C-FRAME,  HYDRAULIC PRESSES   P5102-
GAP FRAME and Pneumatic Punch


APEX DENISON C-FRAME GAP PRESS
Multipress
Model WR023MC-304FSE2030350
Capacity 2 Tons
Stroke adjustable thru 12"

Daylight Opening 16"
Throat depth center of ram to frame 7
"
Ram diameter 1⅝"
Bed Area 30" L-R x 12" F-B
Bed Opening  5" L-R x 8
" F-B
Equipped with:
    Dual Push Buttons for stroke activation
    Emergency Stop Button.
    Hydraulic Pump Drive 3 hp
Excellent Running Condition
Inventory Reference P5102-10048  apex denison C- frame hyd press_multipress_model WR023MC304FSE2030350.93605C_capacity 2 tons_adjustable stroke thru 12 inch_throat depth 7.5 inch_daylight 14.5 inch_diameter of ram 1.625 inch_bolster plate 12 inch x 30 inch x 1 inch thick_bed area below bolster 11 inch x 18 inch with 5 inch x 8.5 inch cut out_working pressure 1000 psi_Serial Number 24535
     apex denison C- frame hyd press_multipress_model WR023MC304FSE2030350.93605C_capacity 2 tons_adjustable stroke thru 12 inch_throat depth 7.5 inch_daylight 14.5 inch_diameter of ram 1.625 inch_bolster plate 12 inch x 30 inch x 1 inch thick_bed area below bolster 11 inch x 18 inch with 5 inch x 8.5 inch cut out_working pressure 1000 psi_Serial Number 24535_Front view
Photo Front view.    apex denison C- frame hyd press_multipress_model WR023MC304FSE2030350.93605C_capacity 2 tons_adjustable stroke thru 12 inch_throat depth 7.5 inch_daylight 14.5 inch_diameter of ram 1.625 inch_bolster plate 12 inch x 30 inch x 1 inch thick_bed area below bolster 11 inch x 18 inch with 5 inch x 8.5 inch cut out_working pressure 1000 psi_Serial Number 24535_Right Side to Front view Photo Right Side to Front view.
apex denison C- frame hyd press_multipress_model WR023MC304FSE2030350.93605C_capacity 2 tons_adjustable stroke thru 12 inch_throat depth 7.5 inch_daylight 14.5 inch_diameter of ram 1.625 inch_bolster plate 12 inch x 30 inch x 1 inch thick_bed area below bolster 11 inch x 18 inch with 5 inch x 8.5 inch cut out_working pressure 1000 psi_Serial Number 24535_Left Side to Front view
Photo Left Side to Front view.     apex denison C- frame hyd press_multipress_model WR023MC304FSE2030350.93605C_capacity 2 tons_adjustable stroke thru 12 inch_throat depth 7.5 inch_daylight 14.5 inch_diameter of ram 1.625 inch_bolster plate 12 inch x 30 inch x 1 inch thick_bed area below bolster 11 inch x 18 inch with 5 inch x 8.5 inch cut out_working pressure 1000 psi_Serial Number 24535_Rear view. Photo Rear view.




DENISON C-FRAME GAP PRESS  MULTIPRESS
Model FH12      Date Mfg. 1974
Capacity 12 Tons
Stroke12"

Daylight Opening 21"
Ram diameter 3"
Ram End diameter 2"
Piston diameter 4"
2-Speeds Ram
17" x 26" Bed Area
Excellent Running Condition
Inventory Reference P5102-9224  abex denison c-frame hydraulic press_capacity 12 ton_multipress_model FH12-10MC304SSW-1CR5610_adjustable ram stroke thru 12 inch_daylight ram up 21 inch_bed 17.250 inch x 26 inch_two ram speeds_Serial Number 24435   abex denison c-frame hydraulic press_capacity 12 ton_multipress_model FH12-10MC304SSW-1CR5610_adjustable ram stroke thru 12 inch_daylight ram up 21 inch_bed 17.250 inch x 26 inch_two ram speeds_Serial Number 24435 Photo



GREENERD 
C-FRAME GAP PRESS
Capacity 30 Tons
Throat Depth 11⅜" cc of ram.

Stroke 16"
Throat Depth 11" cc of ram
Open Height 18"
Bed Size 15" F-B x 20-5/16" L-R
Equipped with
   Electric Foot Trip
   Hydraulic Motor Drive 15 Hp.
   Manual & Auto Down Feed
Inventory Reference P5102-9961  greenerd C- frame hydraulic press_capacity 30 ton_model H-30-35_adjustble stroke thru 17 inch_throat depth 11.375 inch center ram to frame_open height 18.5 inch_bed 15 inch FB x 20-5-16 inch LR_hydraul pump drive 15 hp_electric foot trip_Serial Number 69T1503
greenerd C- frame hydraulic press_capacity 30 ton_model H-30-35_adjustble stroke thru 17 inch_throat depth 11.375 inch center ram to frame_open height 18.5 inch_bed 15 inch FB x 20-5-16 inch LR_hydraul pump drive 15 hp_electric foot trip_Serial Number 69T1503_Photo Front to Right Side
Photo Front to Right Side.    greenerd C- frame hydraulic press_capacity 30 ton_model H-30-35_adjustble stroke thru 17 inch_throat depth 11.375 inch center ram to frame_open height 18.5 inch_bed 15 inch FB x 20-5-16 inch LR_hydraul pump drive 15 hp_electric foot trip_Serial Number 69T1503_Photo Rear to Right Side Photo Rear to Right Side.



HANNIFIN 
C-FRAME GAP PRESS
Capacity Approx 50 Tons
Throat Depth 13"
Stroke 27"
Open Height 29"
Bed Size 22" x 34"
Equipped with: Lower Up Acting Cylinder
Inventory Reference P5102-6300 hannifin C-frame hydraulic press capacity 50 ton approx,stroke 27 inch,throat 13.5 inch,open height 29.5 inch,ram diameter 5 inch,with up action ram,bed 22 inch x 34.5 inch,Serial Number NA     2-photo's with-in hannifin C-frame hydraulic press capacity 50 ton approx,stroke 27 inch,throat 13.5 inch,open height 29.5 inch,ram diameter 5 inch,with up action ram,bed 22 inch x 34.5 inch,Serial Number NA





 

This press is designed to produce formed sheet metal parts typically produced on drop hammer.
▼     ▼     ▼

SHERIDAN GRAY STRETCH DRAW FORMING PRESS
 Model SDP 250-120-60-1500
HYDRAULIC COMPRESSION PRESS: 250 Tons
    
Down Acting 24
" stroke
     Open Height 76"
     Bed and Ram T-Slotted
     Area with-in 4-Post 114" F-B x 130" L-R
     Sheet Capacity 60" x 120"
two STRETCH JAWS:
  Width 64",  Stretch Tonnage 150, 

     Jaw Oscillation Angle 10 degrees left / right.
     Jaws Swing Up thru 22 degrees.
     Jaw Tilt either side of center 15.
     Jaw Pull Down Cylinder Stroke Up thru11".
     Tension Cylinder 54" stroke
OPERATOR CONTROL: Windows 2000 Software with
     Drop Down menus, tabs used to select the various
        screens & controls buttons for input field and
       Manual Control Buttons.
 Inventory Reference S8120-10043
sheridan gray stretch draw press_model SDP-250-120-60-150_Hydraulic Press Compression: 250 Tons_24 inch down acting stroke_open height 76 inch_T-slotted bed and ram_distance between 4-posts 114 inch foward back x 130 inch left right_stretch press 60 inch wide jaws x 120 inch sheet length_jaws swing up-tilt 15 degrees_swing left right 22 degrees_jaw rise fall thru 12 inch_pull back cylinders 24.5 inches_tension cylinders 54 inch stroke_controls software Window 2000 drop down menus
sheridan gray stretch draw press_model SDP-250-120-60-150_Hydraulic Press Compression: 250 Tons_24 inch down acting stroke_open height 76 inch_T-slotted bed and ram_distance between 4-posts 114 inch foward back x 130 inch left right_stretch press 60 inch wide jaws x 120 inch sheet length_jaws swing up-tilt 15 degrees_swing left right 22 degrees_jaw rise fall thru 12 inch_pull back cylinders 24.5 inches_tension cylinders 54 inch stroke_controls software Window 2000 drop down menus_Left Side-Front Photo Left Side-Front view.     sheridan gray stretch draw press_model SDP-250-120-60-150_Hydraulic Press Compression: 250 Tons_24 inch down acting stroke_open height 76 inch_T-slotted bed and ram_distance between 4-posts 114 inch foward back x 130 inch left right_stretch press 60 inch wide jaws x 120 inch sheet length_jaws swing up-tilt 15 degrees_swing left right 22 degrees_jaw rise fall thru 12 inch_pull back cylinders 24.5 inches_tension cylinders 54 inch stroke_controls software Window 2000 drop down menus_Left Side-Rear view Photo Left Side-Rear view.
sheridan gray stretch draw press_model SDP-250-120-60-150_Hydraulic Press Compression: 250 Tons_24 inch down acting stroke_open height 76 inch_T-slotted bed and ram_distance between 4-posts 114 inch foward back x 130 inch left right_stretch press 60 inch wide jaws x 120 inch sheet length_jaws swing up-tilt 15 degrees_swing left right 22 degrees_jaw rise fall thru 12 inch_pull back cylinders 24.5 inches_tension cylinders 54 inch stroke_controls software Window 2000 drop down menus_Rear view thru press and view with Electric control boxes and access ladder to hydraulic drive motors at top of press Photo Rear view.     sheridan gray stretch draw press_model SDP-250-120-60-150_Hydraulic Press Compression: 250 Tons_24 inch down acting stroke_open height 76 inch_T-slotted bed and ram_distance between 4-posts 114 inch foward back x 130 inch left right_stretch press 60 inch wide jaws x 120 inch sheet length_jaws swing up-tilt 15 degrees_swing left right 22 degrees_jaw rise fall thru 12 inch_pull back cylinders 24.5 inches_tension cylinders 54 inch stroke_controls software Window 2000 drop down menus_Right Side to Front view Photo Right Side to Front view.




 

PLEASE NOTE:
"FOR THOSE ITEMS THAT HAVE NOT BEEN PAINTED: Please check out
      presses that have been finished for quality of our finished products."






CLICKER or DIE CUTTING PRESS 

HERMAN SCHWABE C-FRAME DIE CUTTING PRESS (clicker)
            Model DV-HD,  Dytraulic,     Heavy Duty
CAPACITY TONS 25
STROKE OF CYLINDER, Adjustable " to 3"
UPPER ARM PLATEN SIZE: 30" LR x 31⅝" FB
BED SIZE  30" LR x 30" FB
EQUIPPED WITH:
     Dual arm braces
     Hydraulic Pump 5hp
Condition: Excellent

Inventory Reference P3865-10309  25 Ton capacity HERMAN SCHWABE C-FRAME DIE CUTTING PRESS clicker Model DV-HD, Dytraulic, Heavy Duty UPPER ARM PLATEN SIZE: 30" LR x 31⅝" FB, BED SIZE  30" LR x 30" FB, STROKE OF CYLINDER, Adjustable " to 3", EQUIPPED WITH Dual arm braces, Hydraulic Pump 5hp, Serial Number 26990
25 Ton capacity HERMAN SCHWABE C-FRAME DIE CUTTING PRESS clicker Model DV-HD, Dytraulic, Heavy Duty UPPER ARM PLATEN SIZE: 30" LR x 31⅝" FB, BED SIZE  30" LR x 30" FB, STROKE OF CYLINDER, Adjustable " to 3", EQUIPPED WITH Dual arm braces, Hydraulic Pump 5hp, Serial Number 26990, Photo left side to front Photo left side to front view.    25 Ton capacity HERMAN SCHWABE C-FRAME DIE CUTTING PRESS clicker Model DV-HD, Dytraulic, Heavy Duty UPPER ARM PLATEN SIZE: 30" LR x 31⅝" FB, BED SIZE  30" LR x 30" FB, STROKE OF CYLINDER, Adjustable " to 3", EQUIPPED WITH Dual arm braces, Hydraulic Pump 5hp, Serial Number 26990, Photo right side to front Photo right side to front view.
25 Ton capacity HERMAN SCHWABE C-FRAME DIE CUTTING PRESS clicker Model DV-HD, Dytraulic, Heavy Duty UPPER ARM PLATEN SIZE: 30" LR x 31⅝" FB, BED SIZE  30" LR x 30" FB, STROKE OF CYLINDER, Adjustable " to 3", EQUIPPED WITH Dual arm braces, Hydraulic Pump 5hp, Serial Number 26990, Photo rear Photo rear view.




 

FABRICATORS & TURRET PUNCHES 
SINGLE END & TURRET      CNC & MANUAL    P8959-   P9135- &  P9295-

30 Ton STRIPPIT FABRICATOR HOLE PUNCHING MACHINE
 
      Sonic 18/30   Machine Number 301
Throat Depth 19
"
Throat Depth with Microgauging 15"

Maximum Sheet Thickness 1/4" thru 3/4"
 
MAXIMUM HOLE thru 3/32" thru 3"
 
WORKPIECE SIZE w/ Microgauging 15" x 36"
 WORKPIECE SIZE w/ Repositioning 30" x 72"
 
Equipped with:
  
Duplicator.   Micrometer Gauge Bar.    (two) Tool Holders
   80 +/- Miscellaneous Punch & Die Sets, located on Left and Right side of Punch Frame
       with-in 14 storage drawers.
   90 +/-  Punch and Dies with-in Portable 30 drawer Storage Cabinet.
   Electric Foot Trip.
Inventory Reference P8959-10323
  30 Ton STRIPPIT Sonic 18/30 FABRICATOR HOLE PUNCHING MACHINE, Throat Depth 19", Throat Depth  with Microgauging 15", Maximum Sheet Thickness 1/4" thru 3/4", Maximum Hole thru 3/32" thru 3", Workpiece Size w/ Microgauging 15" x 36", Workpiece Size w/ Repositioning 30" x 72", Equipped with Duplicator, Micrometer Gauge Bar, (two) Tool Holders, 170 Miscellaneous Punch & Die Sets,  Machine Number 301


 

 FOUR POSTS, HYDRAULIC PRESSES:   P5102-
DIE TRYOUT & SPOTTING PRESS:
M4098-
HOBBING PRESS P4974-  &   MOLDING PRESSES  P5910-


LIKE NEW

PHI MOLDING PRESS   Up Acting   4-Post
Model IHIS75R-2536-4-81-C
Capacity 75 Tons
RAM STROKE 8"
Bed Size 19" F-B x 28" L-R
Electric Heated Top & Bottom Platens Size each 18" x 18" x 2" thick
Open Height with-out platens 19" adjustable
Equipped with Digital Controls
   2-Honeywell Temperature Gauges.
Inventory Reference P5904-19018
 
phi hydraulic molding press_model  S75R-253C-4-Y1-C_capacity 75 tons_4 post_bed 19 inch x 28 inch bed_stroke 8 inch_electric heated plattens 18.5 inch x 18.5 inch  phi hydraulic molding press_model  S75R-253C-4-Y1-C_capacity 75 tons_4 post_bed 19 inch x 28 inch bed_stroke 8 inch_electric heated plattens 18.5 inch x 18.5 inch Photo

 

This press is double acting 50 ton press that CASTS and MAKES ITS OWN DIES. 
                                                                                              
RUSSELL DUALFORM (JEWELITE) HYDRAULIC PRESS
    Model 40/50T/20X17/6    Type: DOUBLE ACTING
RATED CAPACITY TONS 50
MAIN RAM STROKE 16" (405mm)
BLANKHOLDER

Pressure Maximum 30 Tons,   Stroke 11" (280mm)    DISTANCE BETWEEN RAM FACE and DIEPLATE  24" (610mm
DISTANCE BETWEEN BLANKHOLDER and DIEPLATE 11" (280MM)
PUNCH SIZE, Maximum 20" x 17" (510mm x 430mm)
DEPTH OF PRESS (Stroke) Maximum 6" (150mm)
    SIZE OF BLANK Maximum 32" x 29" (815mm x 735mm)               
Inventory Reference P5127-10234 
RUSSELL DUALFORM JEWELITE 50 ton DOUBLE ACTING HYDRAULIC PRESS, Model 40/50T/20X17/6, RAM STROKE 16" 405mm, BLANKHOLDER 30 ton max Pressure, Stroke 11" 280mm, DISTANCE BETWEEN RAM FACE and DIEPLATE 24" 610mm, DISTANCE BETWEEN BLANKHOLDER and DIEPLATE 11" 280mm PUNCH SIZE, Maximum 20" x 17" 510mm x 430mm, DEPTH OF PRESS Stroke Maximum 6" 150mm, SIZE OF BLANK Maximum 32" x 29", 815mm x 735mm, Serial Number ZP06114
▲                                                   ▲
The press is specialty designed to combine the Dualform tool casting process with that of a robust
      double-action hydraulic press.
The Dualform press allows the operator to make press tools - both punch and die - in the press itself.
Within the bed of the double-acting hydraulic Dualform press is housed a bath of Jewelite a
      (eutectic bismuth-based alloy melting at about 150 F and of high compressive strength. 
Jewelite is melted by built-in electric heaters; the punch and die are cast simultaneously
     within the bath and solidified by cold water)
                                                                                                   
DISCOUNTED BEING OFFERED 15%  OFF LISTED PRICE





 

FLUID FORMING PRESS
Verson Wheelon
P5206-

                                        "DIRECT ACTING,     FLEX-DIE,     RUBBER PAD PRESSES"

THIS PRESS WILL BE AVAILABLE FOR-SALE November 2017

▼                                                                                      ▼

VERSON WHEELON FLUID FORMING PRESS   Model 41000R-50x168
 
   Capacity 41,000 Tons
   
Two
50" x 168" Trays
   
Forming Depth 6 and 10"
    Forming Pressure 10,000 psi
Equipped with: 2-Tray Fill Plates
        2- Throw Pad Roll Up Devices, Hydraulic Driven Fluid Cell Removal Unit and Spare Parts
Inventory Reference P5206-15923 verson wheelon fluid froming press_model 41000R-50-168_forming pressure up to 10000 psi_depth 7 inch and 10 inch  verson wheelon fluid froming press, model 41000R-50-168, forming pressure up to 10,000 psi, depth 7 inch and 10 inch Photo



HYDROFORM PRESSES FLUID FORMING _ CAVITY FORMING _ MALE DIE FORMING
Cincinnati,  Verson,  Avure (Asea Quintus)   P4740- & P5206

PENDING SALE
25-6-10 CINCINNATI HYDROFORM PRESS
Round Chamber
        25" Blank Diameter
        6,000 psi Forming Pressure 
       10" Forming (Draw Depth

Equipped with:
       
Rear Tool Changer
        1-new Single Action Hydraulic Press Conversion Kit.
        1-new extra Diaphragm.
        20-new Pressure Wear pads.
        Miscellaneous Draw Rings.
Inventory Reference P5206-9960 cincinnati hydroform press_model 25-6-10_blank diameter 25 inch_forming press 6000 psi_draw depth 10 inch_punch dia 19 inch_rear tool chamber_round chamber_extra new diaphragm_20 pressure wear pads_miscellaneous draw rings_Serial Number 71-441F991-1
cincinnati hydroform press_model 25-6-10_blank diameter 25 inch_forming press 6000 psi_draw depth 10 inch_punch dia 19 inch_rear  tool chamber_round chamber_equipped with one new extra cell_20 new ware pads_draw rings_one set conversion components to convert press to single action hydraulic press_Serial Number 71-441F991-1_Front to Right Side Photo Front to Right Side View.    cincinnati hydroform press_model 25-6-10_blank diameter 25 inch_forming press 6000 psi_draw depth 10 inch_punch dia 19 inch_rear  tool chamber_round chamber_equipped with one new extra cell_20 new ware pads_draw rings_one set conversion components to convert press to single action hydraulic press_Serial Number 71-441F991-1_Photo Close-up Controls on Press Photo Close-up Controls on Press.
Photo Close-up Operator Remote Push Button Controls.
     Photo Left Side view.     
cincinnati hydroform press_model 25-6-10_blank diameter 25 inch_forming press 6000 psi_draw depth 10 inch_punch dia 19 inch_rear  tool chamber_round chamber_equipped with one new extra cell_20 new ware pads_draw rings_one set conversion components to convert press to single action hydraulic press_Serial Number 71-441F991-1_Photo Close-up Auto Tool Changer Photo Close-up Auto Tool Changer.
Photo
Right Side to Rear view.     cincinnati hydroform press_model 25-6-10_blank diameter 25 inch_forming press 6000 psi_draw depth 10 inch_punch dia 19 inch_rear  tool chamber_round chamber_equipped with one new extra cell_20 new ware pads_draw rings_one set conversion components to convert press to single action hydraulic press_Serial Number 71-441F991-1_Photo new Diaphragm and Wear Pads. Photo new Diaphragm and Wear Pads.



26-15-12 CINCINNATI HYDROFORM PRESS   Round Chamber
   
26" Blank Diameter
    15,000 psi Forming Pressure
    12" Forming (Draw) Depth

cincinnati hydroform press_model 26-15-12_blank diameter 26 inch_forming pressure 15000 psi_forming depth 12 inch_four post design_right to front view Photo
Right Side to Front View.  cincinnati hydroform press_model 26-15-12_blank diameter 26 inch_forming pressure 15000 psi_forming depth 12 inch_four post design_ left to front view Photo Left Side to Front View.   cincinnati hydroform press_model 26-15-12_blank diameter 26 inch_forming pressure 15000 psi_forming depth 12 inch_four post design_left side view Photo Left Side View.
cincinnati hydroform press_model 26-15-12_blank diameter 26 inch_forming pressure 15000 psi_forming depth 12 inch_four post design_rear view
Photo Rear View.    Inventory Reference P5206-19381  cincinnati hydroform press_model 26-15-12_blank diameter 26 inch_forming pressure 15000 psi_forming depth 12 inch_four post design
▲▲
THIS ITEM SOLD. 
Please contact us to be placed onto our
  our active Wanted List.  sales@centurymachinery.com





 

PLEASE CONTACT US FOR QUOTATION and PHOTO'S

Phone  1-213-627-2847      FAX  1-213-627-2499  or
E-Mail us at  sales@centurymachinery.com

" THANK YOU for taking the time to visit our web site "