CYLINDRICAL GRINDERS: All Types

Link back to Home Page►  www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, CATEGORIES ARE IN ALPHABETICAL ORDER.

*CYLINDRICAL GRINDER, GAP BED
STRUT GRINDER CNC, Butler Newall
and
Warner and Swasey - Norton
*PLAIN TYPE*
*STEP, CENTER TYPE: CNC Cylindrical Grinder*
*UNIVERSAL TYPE*

 


If you require a Quote Sheet PLEASE  send  us your requirements:

CENTURY logo
1937 South Santa Fe Avenue
   Los Angeles, California 90021

Email  sales@centurymachinery.com
Website  www.centurymachinery.com

Telephone 1-213-627-2847
Fax 1-213-627-2499

Serving Industry for 83 years


CYLINDRICAL GRINDER, GAP BED  G4790-
STRUT GRINDER CNC, Butler Newall
   G7930


     THIS GRINDER HAS OPTIONAL BED EXTENSIONS
to increase gap distance, between Workhead & Footstock.
                                  ▼                                                 
119" swing in x 106"centers NORTON GAP BED STRUT CYLINDRICAL GRINDER
 CAPACITY
       Swing over Table 32" Diameter
       Swing in Gap 119
" Diameter
       Distance between Centers: Gap Open 106"
     Distance between Centers with BED EXTENSION: Gap Open 312"
GRINDING WHEELHEAD:  Spindle Speed, Variable
GRINDING WHEEL diameter 30"
WHEELHEAD:
    Carriage Traverse: Grinding Rate, INFINITE
Equipped with:
      
Up-graded  Controls with Solid State Motor Drives
       Parts Rests for use with Bed Extensions.
       1-Grinding Wheel Hub.    
       1- Chuck 20" diameter 4-Jaws with reversible top jaws
       Flood Coolant System

 Inventory Reference G7930-10189
CLICK HERE FOR QUOTATION NORTON GAP BED STRUT CYLINDRICAL GRINDER, CAPACITY Swing over Table: 32" diameter, Swing in Gap (Diameter) 119.5", Distance between Headstock and Footstock, Gap Open WITHOUT BED EXTENSION 109", Gap Open WITH BED EXTENSION 320", Width of Gap Open, with-out bed extension, Adjustable to 36",  Table Bed Swivel graduated to an angle of:  Away from Wheelhead 10 minutes.Towards Wheelhead 10 minutes, WHEELHEAD CARRIAGE TRAVERSE: Grinding Rate INFINITE, Full Length of Centers, HEADSTOCK: Live Spindle, Number of work rotation speeds Infinite, Range of work speed 8 to 100 R.P.M.,  Headstock adjustment left / right on top rack, driven by Hand 32", Headstock base adjustment left / right on top rack, driven by Hand, GRINDING WHEEL, RECIPROCATING ARRANGEMENT (Stone Oscillation), FOOTSTOCK: Adjustment left / right on table rack driven by Hand 50", GRINDING STONE CAPACITY Grinding Wheel, 32" diameter, 2" face, MOTOR DRIVES: Wired 440 volts, 3-phase, Wheelhead 20 H.P., Headstock, (Work Spindle)  Infinitely Variable  5 H.P., Table Carriage Drive,  Infinitely Variable 5 H.P. 23-/460 v, Way Oiler Pump Pump   H.P., Coolant Pumps   H.P., CONTROL SYSTEM: ABB Solid State Vari Speed Motor Drive Model ACS500 and Commander SE Control. EQUIPPED WITH Grinding Wheel Spindle with Oscillation, 1- Grinding Wheel Hub,  2-Work Rest for Bed Extension, 1- 20" diameter Four Jaw Chuck w/ 2 piece top jaws, Serial Number 32-86-96-C25203
CLICK HERE FOR PHOTO  NORTON GAP BED STRUT CYLINDRICAL GRINDER, CAPACITY Swing over Table: 32" diameter, Swing in Gap (Diameter) 119.5", Distance between Headstock and Footstock, Gap Open WITHOUT BED EXTENSION 109", Gap Open WITH BED EXTENSION 320", Width of Gap Open, with-out bed extension, Adjustable to 36",  Table Bed Swivel graduated to an angle of:  Away from Wheelhead 10 minutes.Towards Wheelhead 10 minutes, WHEELHEAD CARRIAGE TRAVERSE: Grinding Rate INFINITE, Full Length of Centers, HEADSTOCK: Live Spindle, Number of work rotation speeds Infinite, Range of work speed 8 to 100 R.P.M.,  Headstock adjustment left / right on top rack, driven by Hand 32", Headstock base adjustment left / right on top rack, driven by Hand, GRINDING WHEEL, RECIPROCATING ARRANGEMENT (Stone Oscillation), FOOTSTOCK: Adjustment left / right on table rack driven by Hand 50", GRINDING STONE CAPACITY Grinding Wheel, 32" diameter, 2" face, MOTOR DRIVES: Wired 440 volts, 3-phase, Wheelhead 20 H.P., Headstock, (Work Spindle)  Infinitely Variable  5 H.P., Table Carriage Drive,  Infinitely Variable 5 H.P. 23-/460 v, Way Oiler Pump Pump   H.P., Coolant Pumps   H.P., CONTROL SYSTEM: ABB Solid State Vari Speed Motor Drive Model ACS500 and Commander SE Control. EQUIPPED WITH Grinding Wheel Spindle with Oscillation, 1- Grinding Wheel Hub,  2-Work Rest for Bed Extension, 1- 20" diameter Four Jaw Chuck w/ 2 piece top jaws, Serial Number 32-86-96-C25203, Photo Left-Front with Controls Photo Left Side to Front with Controls.     CLICK HERE FOR PHOTO  NORTON GAP BED STRUT CYLINDRICAL GRINDER, CAPACITY Swing over Table: 32" diameter, Swing in Gap (Diameter) 119.5", Distance between Headstock and Footstock, Gap Open WITHOUT BED EXTENSION 109", Gap Open WITH BED EXTENSION 320", Width of Gap Open, with-out bed extension, Adjustable to 36",  Table Bed Swivel graduated to an angle of:  Away from Wheelhead 10 minutes.Towards Wheelhead 10 minutes, WHEELHEAD CARRIAGE TRAVERSE: Grinding Rate INFINITE, Full Length of Centers, HEADSTOCK: Live Spindle, Number of work rotation speeds Infinite, Range of work speed 8 to 100 R.P.M.,  Headstock adjustment left / right on top rack, driven by Hand 32", Headstock base adjustment left / right on top rack, driven by Hand, GRINDING WHEEL, RECIPROCATING ARRANGEMENT (Stone Oscillation), FOOTSTOCK: Adjustment left / right on table rack driven by Hand 50", GRINDING STONE CAPACITY Grinding Wheel, 32" diameter, 2" face, MOTOR DRIVES: Wired 440 volts, 3-phase, Wheelhead 20 H.P., Headstock, (Work Spindle)  Infinitely Variable  5 H.P., Table Carriage Drive,  Infinitely Variable 5 H.P. 23-/460 v, Way Oiler Pump Pump   H.P., Coolant Pumps   H.P., CONTROL SYSTEM: ABB Solid State Vari Speed Motor Drive Model ACS500 and Commander SE Control. EQUIPPED WITH Grinding Wheel Spindle with Oscillation, 1- Grinding Wheel Hub,  2-Work Rest for Bed Extension, 1- 20" diameter Four Jaw Chuck w/ 2 piece top jaws, Serial Number 32-86-96-C25203, Photo Front view with Workhead bed extension Photo Front view with Workhead bed extension.
        CLICK HERE FOR PHOTO  NORTON GAP BED STRUT CYLINDRICAL GRINDER, CAPACITY Swing over Table: 32" diameter, Swing in Gap (Diameter) 119.5", Distance between Headstock and Footstock, Gap Open WITHOUT BED EXTENSION 109", Gap Open WITH BED EXTENSION 320", Width of Gap Open, with-out bed extension, Adjustable to 36",  Table Bed Swivel graduated to an angle of:  Away from Wheelhead 10 minutes.Towards Wheelhead 10 minutes, WHEELHEAD CARRIAGE TRAVERSE: Grinding Rate INFINITE, Full Length of Centers, HEADSTOCK: Live Spindle, Number of work rotation speeds Infinite, Range of work speed 8 to 100 R.P.M.,  Headstock adjustment left / right on top rack, driven by Hand 32", Headstock base adjustment left / right on top rack, driven by Hand, GRINDING WHEEL, RECIPROCATING ARRANGEMENT (Stone Oscillation), FOOTSTOCK: Adjustment left / right on table rack driven by Hand 50", GRINDING STONE CAPACITY Grinding Wheel, 32" diameter, 2" face, MOTOR DRIVES: Wired 440 volts, 3-phase, Wheelhead 20 H.P., Headstock, (Work Spindle)  Infinitely Variable  5 H.P., Table Carriage Drive,  Infinitely Variable 5 H.P. 23-/460 v, Way Oiler Pump Pump   H.P., Coolant Pumps   H.P., CONTROL SYSTEM: ABB Solid State Vari Speed Motor Drive Model ACS500 and Commander SE Control. EQUIPPED WITH Grinding Wheel Spindle with Oscillation, 1- Grinding Wheel Hub,  2-Work Rest for Bed Extension, 1- 20" diameter Four Jaw Chuck w/ 2 piece top jaws, Serial Number 32-86-96-C25203, Close-up photo Workhead bed extension and part Supports Close-up photo Workhead bed extension and part Supports.
CLICK HERE FOR PHOTO  NORTON GAP BED STRUT CYLINDRICAL GRINDER, CAPACITY Swing over Table: 32" diameter, Swing in Gap (Diameter) 119.5", Distance between Headstock and Footstock, Gap Open WITHOUT BED EXTENSION 109", Gap Open WITH BED EXTENSION 320", Width of Gap Open, with-out bed extension, Adjustable to 36",  Table Bed Swivel graduated to an angle of:  Away from Wheelhead 10 minutes.Towards Wheelhead 10 minutes, WHEELHEAD CARRIAGE TRAVERSE: Grinding Rate INFINITE, Full Length of Centers, HEADSTOCK: Live Spindle, Number of work rotation speeds Infinite, Range of work speed 8 to 100 R.P.M.,  Headstock adjustment left / right on top rack, driven by Hand 32", Headstock base adjustment left / right on top rack, driven by Hand, GRINDING WHEEL, RECIPROCATING ARRANGEMENT (Stone Oscillation), FOOTSTOCK: Adjustment left / right on table rack driven by Hand 50", GRINDING STONE CAPACITY Grinding Wheel, 32" diameter, 2" face, MOTOR DRIVES: Wired 440 volts, 3-phase, Wheelhead 20 H.P., Headstock, (Work Spindle)  Infinitely Variable  5 H.P., Table Carriage Drive,  Infinitely Variable 5 H.P. 23-/460 v, Way Oiler Pump Pump   H.P., Coolant Pumps   H.P., CONTROL SYSTEM: ABB Solid State Vari Speed Motor Drive Model ACS500 and Commander SE Control. EQUIPPED WITH Grinding Wheel Spindle with Oscillation, 1- Grinding Wheel Hub,  2-Work Rest for Bed Extension, 1- 20" diameter Four Jaw Chuck w/ 2 piece top jaws, Serial Number 32-86-96-C25203, Photo Workhead bed extension showing pivot point Photo Workhead bed extension showing pivot point.
       CLICK HERE FOR PHOTO  NORTON GAP BED STRUT CYLINDRICAL GRINDER, CAPACITY Swing over Table: 32" diameter, Swing in Gap (Diameter) 119.5", Distance between Headstock and Footstock, Gap Open WITHOUT BED EXTENSION 109", Gap Open WITH BED EXTENSION 320", Width of Gap Open, with-out bed extension, Adjustable to 36",  Table Bed Swivel graduated to an angle of:  Away from Wheelhead 10 minutes.Towards Wheelhead 10 minutes, WHEELHEAD CARRIAGE TRAVERSE: Grinding Rate INFINITE, Full Length of Centers, HEADSTOCK: Live Spindle, Number of work rotation speeds Infinite, Range of work speed 8 to 100 R.P.M.,  Headstock adjustment left / right on top rack, driven by Hand 32", Headstock base adjustment left / right on top rack, driven by Hand, GRINDING WHEEL, RECIPROCATING ARRANGEMENT (Stone Oscillation), FOOTSTOCK: Adjustment left / right on table rack driven by Hand 50", GRINDING STONE CAPACITY Grinding Wheel, 32" diameter, 2" face, MOTOR DRIVES: Wired 440 volts, 3-phase, Wheelhead 20 H.P., Headstock, (Work Spindle)  Infinitely Variable  5 H.P., Table Carriage Drive,  Infinitely Variable 5 H.P. 23-/460 v, Way Oiler Pump Pump   H.P., Coolant Pumps   H.P., CONTROL SYSTEM: ABB Solid State Vari Speed Motor Drive Model ACS500 and Commander SE Control. EQUIPPED WITH Grinding Wheel Spindle with Oscillation, 1- Grinding Wheel Hub,  2-Work Rest for Bed Extension, 1- 20" diameter Four Jaw Chuck w/ 2 piece top jaws, Serial Number 32-86-96-C25203,  Photo Right Side view with Way Oiler Lubrication reservoir Photo Right Side view with Way Lubrication reservoir.     CLICK HERE FOR PHOTO  NORTON GAP BED STRUT CYLINDRICAL GRINDER, CAPACITY Swing over Table: 32" diameter, Swing in Gap (Diameter) 116", Distance between Headstock and Footstock, Gap Open WITHOUT BED EXTENSION 109", Gap Open WITH BED EXTENSION 320", Width of Gap Open, with-out bed extension, Adjustable to 36",  Table Bed Swivel graduated to an angle of:  Away from Wheelhead 10 minutes.Towards Wheelhead 10 minutes, WHEELHEAD CARRIAGE TRAVERSE: Grinding Rate INFINITE, Full Length of Centers, HEADSTOCK: Live Spindle, Number of work rotation speeds Infinite, Range of work speed 8 to 100 R.P.M.,  Headstock adjustment left / right on top rack, driven by Hand 32", Headstock base adjustment left / right on top rack, driven by Hand, GRINDING WHEEL, RECIPROCATING ARRANGEMENT (Stone Oscillation), FOOTSTOCK: Adjustment left / right on table rack driven by Hand 50", GRINDING STONE CAPACITY Grinding Wheel, 32" diameter, 2" face, MOTOR DRIVES: Wired 440 volts, 3-phase, Wheelhead 20 H.P., Headstock, (Work Spindle)  Infinitely Variable  5 H.P., Table Carriage Drive,  Infinitely Variable 5 H.P. 23-/460 v, Way Oiler Pump Pump   H.P., Coolant Pumps   H.P., CONTROL SYSTEM: ABB Solid State Vari Speed Motor Drive Model ACS500 and Commander SE Control. EQUIPPED WITH Grinding Wheel Spindle with Oscillation, 1- Grinding Wheel Hub,  2-Work Rest for Bed Extension, 1- 20" diameter Four Jaw Chuck w/ 2 piece top jaws, Serial Number 32-86-96-C25203, Photo Carriage Way Lubrication Pump Photo Carriage Way Lubrication Pump.
CLICK HERE FOR PHOTO  NORTON GAP BED STRUT CYLINDRICAL GRINDER, CAPACITY Swing over Table: 32" diameter, Swing in Gap (Diameter) 119.5", Distance between Headstock and Footstock, Gap Open WITHOUT BED EXTENSION 109", Gap Open WITH BED EXTENSION 320", Width of Gap Open, with-out bed extension, Adjustable to 36",  Table Bed Swivel graduated to an angle of:  Away from Wheelhead 10 minutes.Towards Wheelhead 10 minutes, WHEELHEAD CARRIAGE TRAVERSE: Grinding Rate INFINITE, Full Length of Centers, HEADSTOCK: Live Spindle, Number of work rotation speeds Infinite, Range of work speed 8 to 100 R.P.M.,  Headstock adjustment left / right on top rack, driven by Hand 32", Headstock base adjustment left / right on top rack, driven by Hand, GRINDING WHEEL, RECIPROCATING ARRANGEMENT (Stone Oscillation), FOOTSTOCK: Adjustment left / right on table rack driven by Hand 50", GRINDING STONE CAPACITY Grinding Wheel, 32" diameter, 2" face, MOTOR DRIVES: Wired 440 volts, 3-phase, Wheelhead 20 H.P., Headstock, (Work Spindle)  Infinitely Variable  5 H.P., Table Carriage Drive,  Infinitely Variable 5 H.P. 23-/460 v, Way Oiler Pump Pump   H.P., Coolant Pumps   H.P., CONTROL SYSTEM: ABB Solid State Vari Speed Motor Drive Model ACS500 and Commander SE Control. EQUIPPED WITH Grinding Wheel Spindle with Oscillation, 1- Grinding Wheel Hub,  2-Work Rest for Bed Extension, 1- 20" diameter Four Jaw Chuck w/ 2 piece top jaws, Serial Number 32-86-96-C25203, Photo Left Side view Photo Left Side view.    CLICK HERE FOR PHOTO  NORTON GAP BED STRUT CYLINDRICAL GRINDER, CAPACITY Swing over Table: 32" diameter, Swing in Gap (Diameter) 119.5", Distance between Headstock and Footstock, Gap Open WITHOUT BED EXTENSION 109", Gap Open WITH BED EXTENSION 320", Width of Gap Open, with-out bed extension, Adjustable to 36",  Table Bed Swivel graduated to an angle of:  Away from Wheelhead 10 minutes.Towards Wheelhead 10 minutes, WHEELHEAD CARRIAGE TRAVERSE: Grinding Rate INFINITE, Full Length of Centers, HEADSTOCK: Live Spindle, Number of work rotation speeds Infinite, Range of work speed 8 to 100 R.P.M.,  Headstock adjustment left / right on top rack, driven by Hand 32", Headstock base adjustment left / right on top rack, driven by Hand, GRINDING WHEEL, RECIPROCATING ARRANGEMENT (Stone Oscillation), FOOTSTOCK: Adjustment left / right on table rack driven by Hand 50", GRINDING STONE CAPACITY Grinding Wheel, 32" diameter, 2" face, MOTOR DRIVES: Wired 440 volts, 3-phase, Wheelhead 20 H.P., Headstock, (Work Spindle)  Infinitely Variable  5 H.P., Table Carriage Drive,  Infinitely Variable 5 H.P. 23-/460 v, Way Oiler Pump Pump   H.P., Coolant Pumps   H.P., CONTROL SYSTEM: ABB Solid State Vari Speed Motor Drive Model ACS500 and Commander SE Control. EQUIPPED WITH Grinding Wheel Spindle with Oscillation, 1- Grinding Wheel Hub,  2-Work Rest for Bed Extension, 1- 20" diameter Four Jaw Chuck w/ 2 piece top jaws, Serial Number 32-86-96-C25203, Photo Inside Control Cabinet with temp hook up. Photo Inside Control Cabinet with temp hook up.

CLICK HERE FOR PHOTO  NORTON GAP BED STRUT CYLINDRICAL GRINDER, CAPACITY Swing over Table: 32" diameter, Swing in Gap (Diameter) 119.5", Distance between Headstock and Footstock, Gap Open WITHOUT BED EXTENSION 109", Gap Open WITH BED EXTENSION 320", Width of Gap Open, with-out bed extension, Adjustable to 36",  Table Bed Swivel graduated to an angle of:  Away from Wheelhead 10 minutes.Towards Wheelhead 10 minutes, WHEELHEAD CARRIAGE TRAVERSE: Grinding Rate INFINITE, Full Length of Centers, HEADSTOCK: Live Spindle, Number of work rotation speeds Infinite, Range of work speed 8 to 100 R.P.M.,  Headstock adjustment left / right on top rack, driven by Hand 32", Headstock base adjustment left / right on top rack, driven by Hand, GRINDING WHEEL, RECIPROCATING ARRANGEMENT (Stone Oscillation), FOOTSTOCK: Adjustment left / right on table rack driven by Hand 50", GRINDING STONE CAPACITY Grinding Wheel, 32" diameter, 2" face, MOTOR DRIVES: Wired 440 volts, 3-phase, Wheelhead 20 H.P., Headstock, (Work Spindle)  Infinitely Variable  5 H.P., Table Carriage Drive,  Infinitely Variable 5 H.P. 23-/460 v, Way Oiler Pump Pump   H.P., Coolant Pumps   H.P., CONTROL SYSTEM: ABB Solid State Vari Speed Motor Drive Model ACS500 and Commander SE Control. EQUIPPED WITH Grinding Wheel Spindle with Oscillation, 1- Grinding Wheel Hub,  2-Work Rest for Bed Extension, 1- 20" diameter Four Jaw Chuck w/ 2 piece top jaws, Serial Number 32-86-96-C25203, Close-up Workhead Bed Extension. Close-up Workhead Bed Extension.      CLICK HERE FOR PHOTO  NORTON GAP BED STRUT CYLINDRICAL GRINDER, CAPACITY Swing over Table: 32" diameter, Swing in Gap (Diameter) 119.5", Distance between Headstock and Footstock, Gap Open WITHOUT BED EXTENSION 109", Gap Open WITH BED EXTENSION 320", Width of Gap Open, with-out bed extension, Adjustable to 36",  Table Bed Swivel graduated to an angle of:  Away from Wheelhead 10 minutes.Towards Wheelhead 10 minutes, WHEELHEAD CARRIAGE TRAVERSE: Grinding Rate INFINITE, Full Length of Centers, HEADSTOCK: Live Spindle, Number of work rotation speeds Infinite, Range of work speed 8 to 100 R.P.M.,  Headstock adjustment left / right on top rack, driven by Hand 32", Headstock base adjustment left / right on top rack, driven by Hand, GRINDING WHEEL, RECIPROCATING ARRANGEMENT (Stone Oscillation), FOOTSTOCK: Adjustment left / right on table rack driven by Hand 50", GRINDING STONE CAPACITY Grinding Wheel, 32" diameter, 2" face, MOTOR DRIVES: Wired 440 volts, 3-phase, Wheelhead 20 H.P., Headstock, (Work Spindle)  Infinitely Variable  5 H.P., Table Carriage Drive,  Infinitely Variable 5 H.P. 23-/460 v, Way Oiler Pump Pump   H.P., Coolant Pumps   H.P., CONTROL SYSTEM: ABB Solid State Vari Speed Motor Drive Model ACS500 and Commander SE Control. EQUIPPED WITH Grinding Wheel Spindle with Oscillation, 1- Grinding Wheel Hub,  2-Work Rest for Bed Extension, 1- 20" diameter Four Jaw Chuck w/ 2 piece top jaws, Serial Number 32-86-96-C25203, Close-up Work Rest. Close-up Work Rest.
▲THE ABOVE PHOTO TAKEN PRIOR TO GRINDER BEING RE-PAINTED▲




120" swing in x 180" centers
BUTLER NEWALL
CNC GAP BED STRUT CYLINDRICAL GRINDER
 
 CAPACITY
        Rated Swing over Table 32" Diameter
        Swing in Gap 120" Diameter
        Distance between Centers: Gap Closed 90"
                                                        Gap Open 180"
        Grinding Wheelhouse Stroke 76"
 GRINDING WHEELHEAD:  Spindle Speed, Variable
 GRINDING WHEEL (diameter, face and hole) 30" x 3" x 12"
 WHEELHEAD:
     Spindle Speeds Infinitely Variable 4000 to 8000 fpm : 500 to 1500 rpm
     Carriage Traverse: Grinding Rate, INFINITE
 HEADSTOCK:
      
12 inch diameter thru hole.
       with two 36 inch diameter chucks mounted on front and rear.
       Number of work rotation speeds., Infinite 10 to 100 rpm.
 CNC CONTROLS
 Equipped with:
         two 32" diameter Four Jaw Chuck with Top Reversible Jaws.
        Automatic Grinding Stone Dresser Attachment.

  Inventory Reference G7930-101
74 
CLICK HERE FOR QUOTATION  butler newall cnc gap bed strut cyl grinder120 in swing in gap x 180 in centers,swing over table ways 32 inch, actual swing 44 inch, gap width open108 inch, workhead has Front and Rear 36 inch diameter Chucks with 12 inch diameter thru hole,Serial GBG4094
       CLICK HERE FOR PHOTO  butler newall cnc gap bed strut cyl grinder120 in swing in gap x 180 in centers,swing over table ways 32 inch, actual swing 44 inch, gap width open108 inch, workhead has Front and Rear 36 inch diameter Chucks with 12 inch diameter thru hole,Serial GBG4094, Photo right end to front view Photo Right End to Front view.    CLICK HERE FOR PHOTO  butler newall cnc gap bed strut cyl grinder120 in swing in gap x 180 in centers,swing over table ways 32 inch, actual swing 44 inch, gap width open108 inch, workhead has Front and Rear 36 inch diameter Chucks with 12 inch diameter thru hole,Serial GBG4094, Photo Front view at Left End towards Workhead Photo Front view at Left End towards Workhead.
CLICK HERE FOR PHOTO  butler newall cnc gap bed strut cyl grinder120 in swing in gap x 180 in centers,swing over table ways 32 inch, actual swing 44 inch, gap width open108 inch, workhead has Front and Rear 36 inch diameter Chucks with 12 inch diameter thru hole,Serial GBG4094, Photo Front view Wheelhead Photo Front view Wheelhead.    CLICK HERE FOR PHOTO  butler newall cnc gap bed strut cyl grinder120 in swing in gap x 180 in centers,swing over table ways 32 inch, actual swing 44 inch, gap width open108 inch, workhead has Front and Rear 36 inch diameter Chucks with 12 inch diameter thru hole,Serial GBG4094, Photo Front view Footstock Photo Front view Footstock.
       CLICK HERE FOR PHOTO  butler newall cnc gap bed strut cyl grinder120 in swing in gap x 180 in centers,swing over table ways 32 inch, actual swing 44 inch, gap width open108 inch, workhead has Front and Rear 36 inch diameter Chucks with 12 inch diameter thru hole,Serial GBG4094, Photo Rear view Footstock Photo Rear view Footstock.    CLICK HERE FOR PHOTO  butler newall cnc gap bed strut cyl grinder120 in swing in gap x 180 in centers,swing over table ways 32 inch, actual swing 44 inch, gap width open108 inch, workhead has Front and Rear 36 inch diameter Chucks with 12 inch diameter thru hole,Serial GBG4094, Photo Right End view toward wheelhouse Photo Right End view toward wheelhouse.
CLICK HERE FOR PHOTO  butler newall cnc gap bed strut cyl grinder120 in swing in gap x 180 in centers,swing over table ways 32 inch, actual swing 44 inch, gap width open108 inch, workhead has Front and Rear 36 inch diameter Chucks with 12 inch diameter thru hole,Serial GBG4094, Photo Footstock end rear view Photo Footstock end rear view.      CLICK HERE FOR PHOTO  butler newall cnc gap bed strut cyl grinder120 in swing in gap x 180 in centers,swing over table ways 32 inch, actual swing 44 inch, gap width open108 inch, workhead has Front and Rear 36 inch diameter Chucks with 12 inch diameter thru hole,Serial GBG4094, Photo Operator Control Station Photo Operator Control Station.
         CLICK HERE FOR PHOTO  butler newall cnc gap bed strut cyl grinder120 in swing in gap x 180 in centers,swing over table ways 32 inch, actual swing 44 inch, gap width open108 inch, workhead has Front and Rear 36 inch diameter Chucks with 12 inch diameter thru hole,Serial GBG4094, Photo Workhead Photo Workhead.    CLICK HERE FOR PHOTO  butler newall cnc gap bed strut cyl grinder120 in swing in gap x 180 in centers,swing over table ways 32 inch, actual swing 44 inch, gap width open108 inch, workhead has Front and Rear 36 inch diameter Chucks with 12 inch diameter thru hole,Serial GBG4094, Photo view towards front of Workhead Photo view towards front of Workhead.
CLICK HERE FOR PHOTO  butler newall cnc gap bed strut cyl grinder120 in swing in gap x 180 in centers,swing over table ways 32 inch, actual swing 44 inch, gap width open108 inch, workhead has Front and Rear 36 inch diameter Chucks with 12 inch diameter thru hole,Serial GBG4094, Photo Workhead longitudinal movement pneumatic drive motor Photo Workhead longitudinal movement pneumatic drive motor.
         CLICK HERE FOR PHOTO  butler newall cnc gap bed strut cyl grinder120 in swing in gap x 180 in centers,swing over table ways 32 inch, actual swing 44 inch, gap width open108 inch, workhead has Front and Rear 36 inch diameter Chucks with 12 inch diameter thru hole,Serial GBG4094, Photo Wheelhouse longitudinal Ways Photo Wheelhouse longitudinal Ways
CLICK HERE FOR PHOTO  butler newall cnc gap bed strut cyl grinder120 in swing in gap x 180 in centers,swing over table ways 32 inch, actual swing 44 inch, gap width open108 inch, workhead has Front and Rear 36 inch diameter Chucks with 12 inch diameter thru hole,Serial GBG4094, Photo Gap Ways, towards Workhead Photo Gap Ways, towards Workhead.    CLICK HERE FOR PHOTO  butler newall cnc gap bed strut cyl grinder120 in swing in gap x 180 in centers,swing over table ways 32 inch, actual swing 44 inch, gap width open108 inch, workhead has Front and Rear 36 inch diameter Chucks with 12 inch diameter thru hole,Serial GBG4094, Photo Gap Ways, towards Wheelhouse Photo Gap Ways, towards Wheelhouse.





 

CYLINDRICAL GRINDER, PLAIN TYPE   G8500-


4-31/32" x 18" BROWN and SHARPE PLAIN CYLINDRICAL GRINDER
MODEL 5
TABLE: Hand and Power.

HEAD STOCK: Live & Dead,   Speeds 202, 319, 508, 800 rpm.
FOOT STOCK Lever Operated No. 7 Jarno Taper
WHEEL SIZE:  14" dia. x 1" width x 5" bore
EQUIPPED WITH:
   Grinding Wheel Reciprocating (Stone Oscillation)
   Plunge In Feed.  Wheel Slide Rapid Travel.
   Independent Cross Feed Arrangement.
   True with Headstock Grind/True Switch.
   Wheel Slide Rapid On/Off Switch.
   1-Grinding Wheel Hub.  Coolant Pump
Inventory Reference G4706-10175 
brown and sharpe plain cylindrical grinder, model 5, capacity 4.907 inch x 18 inch, hand & power table, plunge in, live headstock, spark timing, stone oscillation, hardened bed, electrolign, Serial Number 522-5-782
These photos taken of another unit just sold, Please us as example of finish you can expect.
▼▼

 CLICK HERE FOR EXAMPLE OF OUR FINISHED GRINDER  4-31/32" x 18" BROWN and SHARPE PLAIN CYLINDRICAL GRINDER MODEL 5, TABLE Hand and Power, HEAD STOCK: Live & Dead, Speeds 202, 319, 508, 800 rpm, FOOT STOCK Lever Operated No. 7 Jarno Taper, WHEEL SIZE:  14" dia. x 1" width x 5" bore, EQUIPPED WITH Grinding Wheel Reciprocating (Stone Oscillation), Plunge In Feed, Wheel Slide Rapid Travel, Independent Cross Feed Arrangement, True with Headstock Grind/True Switch, Wheel Slide Rapid On/Off Switch, 1-Grinding Wheel Hub, Coolant Pump   CLICK HERE FOR EXAMPLE OF OUR FINISHED GRINDER 4-31/32" x 18" BROWN and SHARPE PLAIN CYLINDRICAL GRINDER MODEL 5, TABLE Hand and Power, HEAD STOCK: Live & Dead, Speeds 202, 319, 508, 800 rpm, FOOT STOCK Lever Operated No. 7 Jarno Taper, WHEEL SIZE:  14" dia. x 1" width x 5" bore, EQUIPPED WITH Grinding Wheel Reciprocating (Stone Oscillation), Plunge In Feed, Wheel Slide Rapid Travel, Independent Cross Feed Arrangement, True with Headstock Grind/True Switch, Wheel Slide Rapid On/Off Switch, 1-Grinding Wheel Hub, Coolant Pump  Photos show finished Grinder, this is what you can expect this or other grinders finish to be.



THIS UNIT HAS JUST BEEN SOLD

4-31/32" x 18" BROWN and SHARPE PLAIN CYLINDRICAL GRINDER
MODEL 5
TABLE: Hand and Power.  
Flat Bed, Hardened & Ground Working Surface.
HEAD STOCK: Live & Dead,   Speeds 202, 319, 508, 800 rpm.
FOOT STOCK Lever Operated No. 7 Jarno Taper
WHEEL SIZE:  16" dia. x " width x 8" bore
EQUIPPED WITH: Hydrostatic Headstock
   Electralign Gauging.    Plunge In Feed.  Wheel Slide Rapid Travel.
   Independent Cross Feed Arrangement.
   True with Headstock Grind/True Switch.
   Timing Range Setting Dial.   Wheel Slide Rapid On/Off Switch.
   Vibration On/Off Switch.  End of Spark Timing Light.
   1-Grinding Wheel Hub.
Inventory Reference G4706-9920 
brown & sharpe plain cyl grinder #5, swing 4.907 inch x 18 inch, hand & power table, plunge in, stone oscill, spark, vari headstock
▼▼

 CLICK HERE FOR EXAMPLE OF OUR FINISHED GRINDER  brown and sharpe plain cylindrical grinder_model 5_capacity 4.907 inch x 18 inch_hand & power table travel_plunge in_live headstock_spark timing_stone oscillation_hardened bed_electrolign  Photos show finished Grinder, this is what you can expect this or other grinders finish to be.
 

CNC Cylindrical Grinder: STEP, CENTER TYPE

Sorry we are out of stock, but Call Us we do have a data base of customers who just might have what you are looking for.




CYLINDRICAL GRINDER, UNIVERSAL TYPE  G4800-

9" x 24" BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER    
Model 814U   Valumaster
Capacity Grinding Wheel 7" diameter  x 1" wide
Equipped with   Hand and Power Longitudinal Travel
   Grinding Wheelhead swivel range 110 right / left
   Automatic Infeed at table reversal.
   Headstock Live, 4- Work Speeds
   Wheel Slide Rapid Travel     Coolant Pump
Inventory Reference G4800-9665  BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER, model 814U, valumaster, swing 8" diameter x centers 24", swivel table 90 degree, grinding wheelhead swivel right or left, headstock & footstock live, infinitely variable speed 195 thru 540 rpm, headstock swivel range towards away from wheelhead 100 degrees, auto infeed at table reversal, wheelhead 1 hp motor, headstock 1/6 hp,Serial Number 525-8144-2581
CLICK HERE FOR PHOTO  BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER_model 814U_valumaster_capacity  swing over table 8" diameter_length between centers 24" maximum_swivel table graduated to an angle of towards and away from wheelhead 90 degree_swivel table graduated taper per foot towards and away from wheelhead 3"_grinding wheelhead swivel Range Upper Swivel110 Degrees right or left_grinding wheel is t diameter x 1 wide_headstock and footstock is live with number 10 brown & sharpe taper_number of work rotation speed is infinitely variable range 195 thru 540 rpm_headstock swivel range towards and away from wheelhead  s 100 degrees_table traverse speed 7.7 thru 100 inch per minute_hand and power feed_automatic infeed at table reversal_ wheelhead is powered by 1 hp motor_headstock is by 1/6 hp_table is by  hp_and coolant pump by  hp_equipped with coolant and work light_Serial Number 525-8144-2581_Photo taken prior to clean-up
Photo taken prior to clean up. Check Landis below for finish that you can expect.




10" x 20" LANDIS UNIVERSAL CYLINDRICAL GRINDER
Model 1R     Rebuilt July 1989
C
apacity Grinding Wheel 12" diameter  x 2" wide
Equipped with   Hand and Power Longitudinal Travel
   Grinding Wheelhead swivel range 90 right / left
   Automatic Infeed at table reversal.
   6- Headstock Work Speeds 60 thru 600 rpm
   Headstock swivel range 90 Towards / Away  from wheelhead.
   Wheel Slide Rapid Travel     Coolant Pump
Inventory Reference G4800-9775  1R landis universal cylindrical grinder, 10 inch swing x 20 inch centers, table feed hand and hydraulic,hand cross feed, Serial Number 835-97   1R landis universal cylindrical grinder, capacity 10 inch swing x 20 inch centers, table feed hand and hydraulic,hand cross feed,mfg 68,Rebuilt 7-1989,Serial Number 835-97, Photo front view



10" x 22" BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER
Model 1
Condition: Very Little Use

C
apacity TWO Grinding Wheels 10" diameter  x 1/2" wide
  
(Swiveling at Wheel Head or at Wheel Slide permits any compound setting required
        in combination straight and taper grinding, external or internally.)

Hand and Power Longitudinal Travel
Grinding Wheelhead swivel range 90 right / left
Automatic Infeed at table reversal.
Headstock Work Speeds 60 thru 600 rpm
Headstock swivel range 90 Towards / Away  from wheelhead.
Wheel Slide Rapid Travel
Equipped with:  Internal Spindle,  1-Center Rest.  1-Radius Wheel Truing Attachment.
   2-Universal Back Rest with Adjustable Shoe.
   1-Table Type Wheel Truing Fixture.  B&S Electralign.   1-Coolant Pump
Inventory Reference G4800-10338   CLICK HERE FOR QUOTATION  10" x 22" BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER, Model 1 Capacity TWO Grinding Wheels 10" diameter  x 1/2" wide, (Swiveling at Wheel Head or at Wheel Slide permits any compound setting required in combination straight and taper grinding, external or internally.) Hand and Power Longitudinal Travel, Grinding Wheelhead swivel range 90 right / left, Automatic Infeed at table reversal, Headstock Work Speeds 60 thru 600 rpm, Headstock swivel range 90 Towards / Away  from wheelhead,  Wheel Slide Rapid Travel, Equipped with 1-Center Rest, 1-Radius Wheel Truing Attachment, 2-Universal Back Rest with Adjustable Shoe, 1-Table Type Wheel Truing Fixture, B&S Electralign, 1-Coolant Pump, Serial Number 521-1-803   CLICK HERE FOR PHOTO  10" x 22" BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER, Model 1 Capacity TWO Grinding Wheels 10" diameter  x 1/2" wide, (Swiveling at Wheel Head or at Wheel Slide permits any compound setting required in combination straight and taper grinding, external or internally.) Hand and Power Longitudinal Travel, Grinding Wheelhead swivel range 90 right / left, Automatic Infeed at table reversal, Headstock Work Speeds 60 thru 600 rpm, Headstock swivel range 90 Towards / Away  from wheelhead,  Wheel Slide Rapid Travel, Equipped with Internal Spindle, 1-Center Rest, 1-Radius Wheel Truing Attachment, 2-Universal Back Rest with Adjustable Shoe, 1-Table Type Wheel Truing Fixture, B&S Electralign, 1-Coolant Pump, Serial Number 521-1-803, Photo Front view Photo Front view
      CLICK HERE FOR PHOTO  10" x 22" BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER, Model 1 Capacity TWO Grinding Wheels 10" diameter  x 1/2" wide, (Swiveling at Wheel Head or at Wheel Slide permits any compound setting required in combination straight and taper grinding, external or internally.) Hand and Power Longitudinal Travel, Grinding Wheelhead swivel range 90 right / left, Automatic Infeed at table reversal, Headstock Work Speeds 60 thru 600 rpm, Headstock swivel range 90 Towards / Away  from wheelhead,  Wheel Slide Rapid Travel, Equipped with Internal Spindle, 1-Center Rest, 1-Radius Wheel Truing Attachment, 2-Universal Back Rest with Adjustable Shoe, 1-Table Type Wheel Truing Fixture, B&S Electralign, 1-Coolant Pump, Serial Number 521-1-803, Photo Left Side to Front view Photo Left Side to Front view.      CLICK HERE FOR PHOTO  10" x 22" BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER, Model 1 Capacity TWO Grinding Wheels 10" diameter  x 1/2" wide, (Swiveling at Wheel Head or at Wheel Slide permits any compound setting required in combination straight and taper grinding, external or internally.) Hand and Power Longitudinal Travel, Grinding Wheelhead swivel range 90 right / left, Automatic Infeed at table reversal, Headstock Work Speeds 60 thru 600 rpm, Headstock swivel range 90 Towards / Away  from wheelhead,  Wheel Slide Rapid Travel, Equipped with Internal Spindle, 1-Center Rest, 1-Radius Wheel Truing Attachment, 2-Universal Back Rest with Adjustable Shoe, 1-Table Type Wheel Truing Fixture, B&S Electralign, 1-Coolant Pump, Serial Number 521-1-803, Photo Right Side to Front view Photo Right Side to Front view.
CLICK HERE FOR PHOTO  10" x 22" BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER, Model 1 Capacity TWO Grinding Wheels 10" diameter  x 1/2" wide, (Swiveling at Wheel Head or at Wheel Slide permits any compound setting required in combination straight and taper grinding, external or internally.) Hand and Power Longitudinal Travel, Grinding Wheelhead swivel range 90 right / left, Automatic Infeed at table reversal, Headstock Work Speeds 60 thru 600 rpm, Headstock swivel range 90 Towards / Away  from wheelhead,  Wheel Slide Rapid Travel, Equipped with Internal Spindle, 1-Center Rest, 1-Radius Wheel Truing Attachment, 2-Universal Back Rest with Adjustable Shoe, 1-Table Type Wheel Truing Fixture, B&S Electralign, 1-Coolant Pump, Serial Number 521-1-803, Photo close-up tooling Photo Close-up Tooling.      CLICK HERE FOR PHOTO  10" x 22" BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER, Model 1 Capacity TWO Grinding Wheels 10" diameter  x 1/2" wide, (Swiveling at Wheel Head or at Wheel Slide permits any compound setting required in combination straight and taper grinding, external or internally.) Hand and Power Longitudinal Travel, Grinding Wheelhead swivel range 90 right / left, Automatic Infeed at table reversal, Headstock Work Speeds 60 thru 600 rpm, Headstock swivel range 90 Towards / Away  from wheelhead,  Wheel Slide Rapid Travel, Equipped with Internal Spindle, 1-Center Rest, 1-Radius Wheel Truing Attachment, 2-Universal Back Rest with Adjustable Shoe, 1-Table Type Wheel Truing Fixture, B&S Electralign, 1-Coolant Pump, Serial Number 521-1-803, Photo close-up tooling Photo Close-up Tooling.

 

Please contact us for Quotations and Photo's.

Phone   1-213-627-2847       Fax  1-213-627-2499

E-Mail us at  sales@centurymachinery.com

" THANK YOU for taking the time to visit our web site "