, VERSAFORM EXTRUSION STRETCH WRAP FORMING MACHINE
Model DB70T, Serial Number 169-SF-002
SPECIFICATIONS
FORMING TONNAGE 70
JAW AXIAL ROTATION +/- 180 Degrees
DISTANCE BETWEEN JAWS 334" (8,483.6 mm)
OPERATING (psi) 2,000
TENSION CYLINDER STROKE 30" (762 mm)
TENSION CYLINDER SPEED, up to 30 ipm (762 mm/min.)
TENSION CYLINDER ROTATION +/- 25 Degrees
ARM SWING (Each Arm) Independent
10 Degrees Forward to 90 Degrees Back.
WRAPPING SPEED RANGE Adjustable
DIE LENGTH at FULL TONNAGE and 180 degrees Wrap:
Minimum 18" (457 mm)
Maximum 72" (1829 mm)
DIE TABLE: (4) FB-Slots & 3 LR Slots
Working Surface, W x D 72" x 48" (1,828 mm x 1,219.2 mm)
Height Table To Floor 36" (914 mm)
(62) Pre-Drilled & Threaded Holes
MOTOR DRIVE: Wired 460 volts, 3 Phase
Hydraulic Pump Swing Arms 50 hp. 230/460 volts
Hydraulic Pump Pull Back Cylinders 40 hp. 230-460 volts
Hydraulic Oil Cooler Fan 1/3 hp
CONTROLS: Hand Push Buttons, with Start and Stop Buttons
EQUIPPED WITH: (1) set 8" (203.2mm) Gripper Jaws
(1) 6" (152.4mm) dimeter Jaw Cone1 set of Die Holder L Plates each 24" LR x 18" Ht
(1 set) of Die Holder L Plates each 24" LR x 18" Ht
(1 set) Tool Post Adjustable (threaded) 5” (127mm) diameter x 11" (279.4mm) Adjustable Height
(1-set) V-Top Tool Holder 9" (228.6mm) Adjustable Height
(1-lot) Miscellaneous Bolts, Wrenches and Blocking)
COMPLETE FACTORY SAFETY GUARDS
Dimensions Machine 96" LR x 180" FB x 103" Height
(2,438.4mm LR x 4,572mm FB x 2,616.2 Height)
Dimensions, Operator Control Station 48" LR x 56" FB x 55" Height
(1,219.2mm LR x 1,422.4mm FB x 1397mm Height)
Weight Approximate 38,000 lbs.
NOTE PIT REQUIRED: All hydraulic lines from machine to operator control station run beneath forming table
![17.5 tons, Hufford A-10 Extrusion Stretch Wrap Forming Press Machine, Distance between 4" jaws 219", Tension Cylinder Stroke18.5", Simultaneous Arms Movement, ID BHW-P 361 [S8120-10219]](https://centurymachinery.com/wp-content/uploads/2021/04/10219-1-hufford-stretch-wrap-forming-press-A-10-17.5-T-4-in-jaws-BJ-219-intension-cyl-str-18.5in-Simultaneous-Arms-ID-BHW-P-361-F-LS-229x300.jpg "Hufford A-10 Extrusion Stretch Wrap Forming Press Machine, Distance between 4\" jaws 219\", Tension Cylinder Stroke18.5\", Simultaneous Arms Movement, ID BHW-P 361, Inventory Reference S8120-10219 - Century Machinery")
![60 tons, Hufford A-12 Extrusion & Sheet Stretch Wrap Forming Press Machine, Distance between jaws Minimum 28", Maximum 264", Sheet Jaws 20 inch wide, Extrusion Gripper Jaws 6 inch, Tension Cylinder Stroke 30", Independent Arm Movement, Serial Number 40, [S8120-10342]](https://centurymachinery.com/wp-content/uploads/2021/04/10342-1-hufford-A-12-extrusion-_-sheet-stretch-wrap-former-60-T-BJ-28-inch-260-inch-20-inch-sheet-jaws-die-length-72-inch-Serial-40LS-F-300x300.jpg "Hufford A-12 Extrusion & Sheet Stretch Wrap Forming Press Machine - 60 tons - Distance between jaws Minimum 28\" - Maximum 264\" - Sheet Jaws 20\" wide and Extrusion Gripper Jaws 6 inch - Tension Cylinder Stroke 30\", Independent Arm Movement, Serial Number 40, Inventory Reference S8120-10342 - Century Machinery")
![30 tons, Cyril Bath-Alstom V-30-300 CNC Extrusion and Sheet Stretch Wrap Forming Press Machine, Distance between 6" Jaws 300", Tension Cylinder Stroke 30", Independent Arms Movement, Serial Number M-7416, [S8120-10287]](https://centurymachinery.com/wp-content/uploads/2021/04/10287-1-cyril-bath-alstom-CNC-stretch-wrap-former-V30-300-30-T4x5-in-jawsBJ-300-in-Str-30-inindepend-arms-Mfg-98-Serial-M-7416-L-F-300x300.jpg "30 tons, Cyril Bath-Alstom V-30-300 CNC Extrusion and Sheet Stretch Wrap Forming Press Machine, Distance between 6\" Jaws 300\", Tension Cylinder Stroke 30\", Independent Arms Movement, Serial Number M-7416, [S8120-10287] - Century Machinery")
