Description
ELEKTRA BECKUM VERTICAL BAND SAW
Model BAS450WN Serial Number 70E0530
SPECIFICATIONS
CAPACITIES:
THROAT DEPTH 17½" (440mm)
HEIGHT UNDER GUIDE 12.992" (330mm)
(Top of table to bottom of upper guide in the up position.)
BLADE SPEED: Four Speed thru belt change
269.02, 692.3, 1476.4, 3805.8 ft/min (82, 211, 450, 1160 m/min)
TABLE:
Working Area, 21.653" FB x 23.62" LR (550x600mm)
Tilting 10 degrees Up 45 degrees Down
BLADE TENSION ADJUSTMENT: by Hand Wheel with Indicator Gauge.
BLADE: Width 1/8" thru 1" (3 – 25mm)
Length Min. 149" (3785mm) Max. 152" (3861mm)
MOTOR DRIVES: Motors wired 440 volts
Main 1½ hp- 0.36 hp (2.1-5 kw) 440volts
CONTROLS: Controls Wired Low voltage
Start/Stop Buttons Remote
COMPLETE FACTORY SAFETY GUARDS
BLADE LENGTH: 133”
COMPLETE FACTORY SAFETY GUARDS
Dimensions: 24" FB x 32" LR x 76" height
Approximately weight 290 lbs.
![18" x 20" Marvel Tilting Frame Vertical Band Saw, Series 8, Mark I, Blade Speed variable 50 - 450 fpm, Motor Drive 2 hp, Serial Number 822757-W [S0690-10499]](https://centurymachinery.com/wp-content/uploads/2021/04/10499-1-marvel-tilt-frame-vertical-band-saw-18-inch-x-20-inch-series-8-mark-I-blade-speed-50-450-fpm-2-hp-Serial-822757-W-F-LS-300x300.jpg "18 inch x 20 inch Marvel Series 8 Mark I Tilting Frame Vertical Band Saw with Variable Blade Speed 50 thru 450 fpm, Motor Drive 2 hp, Serial Number 822757-W, Inventory Refrerence S0690-10499 - Century Machinery")
![16" Throat, Doall Vertical Band Saw, Model 16-Zephyr, Height Under Guide 10", Variable Speed 0-5000 fpm, Drive1 hp, with Air Pump, Blade Welder, Serial Number 450781 [S0690-10523]](https://centurymachinery.com/wp-content/uploads/2021/01/10523-1doall-vertical-band-saw16-inchmodel-16-zephyr-under-guide-10-inchVS-0-5000-fpm1-hp-air-pump-blade-welder-Serial-4507816-F-300x300.jpg "16 inch Doall Model 16-Zephyr Vertical Band Saw with 10 inch Height Under Guide Variable Speed 0-5000 fpm with Drive1 hp, with Air Pump, Blade Welder, Serial Number 450781, Inventory Reference S0690-10523 - Century Machinery")
