Marvel Spartan 66-Ton Hydraulic Ironworker Model IW-66D, Angle 5 in x 5 in x 0.50 in, Shear 0.4625 in x14 in, Notcher 2 in x 3.5 in-x 3-8 in, Mfg Date 4-02-Serial IW66D-165-Punch-End
Marvel Spartan 66-Ton Hydraulic Ironworker Model IW-66D, Angle 5 in x 5 in x 0.50 in, Shear 0.4625 in x14 in, Notcher 2 in x 3.5 in-x 3-8 in, Mfg Date 4-02-Serial IW66D-165, ID Tag, Ref 10623-11
Marvel Spartan 66-Ton Hydraulic Ironworker Model IW-66D, Angle 5 in x 5 in x 0.50 in, Shear 0.4625 in x14 in, Notcher 2 in x 3.5 in-x 3-8 in, Mfg Date 4-02-Serial IW66D-165, Tooling, Ref 10623-10
Marvel Spartan 66-Ton Hydraulic Ironworker Model IW-66D, Angle 5 in x 5 in x 0.50 in, Shear 0.4625 in x14 in, Notcher 2 in x 3.5 in-x 3-8 in, Mfg Date 4-02-Serial IW66D-165, Electrical Cabinet, Ref 10623-9
Marvel Spartan 66-Ton Hydraulic Ironworker Model IW-66D, Angle 5 in x 5 in x 0.50 in, Shear 0.4625 in x14 in, Notcher 2 in x 3.5 in-x 3-8 in, Mfg Date 4-02-Serial IW66D-165-Infeed angle-rod-cop end Ref 10623-2
Marvel Spartan 66-Ton Hydraulic Ironworker Model IW-66D, Angle 5 in x 5 in x 0.50 in, Shear 0.4625 in x14 in, Notcher 2 in x 3.5 in-x 3-8 in, Mfg Date 4-02-Serial IW66D-165, Notcher-Material Exit, Ref 10623-8
Marvel Spartan 66-Ton Hydraulic Ironworker Model IW-66D, Angle 5 in x 5 in x 0.50 in, Shear 0.4625 in x14 in, Notcher 2 in x 3.5 in-x 3-8 in, Mfg Date 4-02-Serial IW66D-165, Material Exit, Ref 10623-7
Marvel Spartan 66-Ton Hydraulic Ironworker Model IW-66D, Angle 5 in x 5 in x 0.50 in, Shear 0.4625 in x14 in, Notcher 2 in x 3.5 in-x 3-8 in, Mfg Date 4-02-Serial IW66D-165, Rear- Punch, Ref 10623-6
Marvel Spartan 66-Ton Hydraulic Ironworker Model IW-66D, Angle 5 in x 5 in x 0.50 in, Shear 0.4625 in x14 in, Notcher 2 in x 3.5 in-x 3-8 in, Mfg Date 4-02-Serial IW66D-165-, Notcher, Ref 10623-5
Marvel Spartan 66-Ton Hydraulic Ironworker Model IW-66D, Angle 5 in x 5 in x 0.50 in, Shear 0.4625 in x14 in, Notcher 2 in x 3.5 in-x 3-8 in, Mfg Date 4-02-Serial IW66D-165-, Notcher end, Ref 10623-4
Marvel Spartan 66-Ton Hydraulic Ironworker Model IW-66D, Angle 5 in x 5 in x 0.50 in, Shear 0.4625 in x14 in, Notcher 2 in x 3.5 in-x 3-8 in, Mfg Date 4-02-Serial IW66D-165-Infeed angle-rod-cop end Ref 10623-3

Best used Marvel Spartan IW66D Universal 66 Tons Ironworker with Angle Capacity 5 inch x 5 inch x 0.50 inch Punch Capacity 1.0625 inch thru 0.75 inch thick material and Rectangular Notcher 3.5 inch x 3.5 inch x 0.375 inch and Flat Shear 14 inch wide, Serial Number IW66D-165, Mfg’s 2002, Inventory Reference P8915-10623

Best used Marvel Spartan IW66D Universal 66 Tons Ironworker

Model Number: IW66D, Spartan

Serial Number: IW66D-165

Reference No: Ironworker, Universal, Hydraulic & P8915-10623

Condition: Best used Excellent

Mfg Date:

Model Number IW66D, Spartan

Serial Number IW66D-165

Reference Number Ironworker, Universal, Hydraulic & P8915-10623

Read More
Request Similar Item
1-213-627-2847
Category:

Description

MARVEL SPARTAN UNIVERSAL HYDRAULIC IRONWORKER
     Model IW66D   (Armstrong – Blum Mfg.)
     Serial Number IWC66D-165
     Date Mfg,d 4-18-2002

SPECIFICATIONS: 
PUNCHING CAPACITY:
     Nominal Tonnage 66
     Punch Diameter x Plate thickness  1-1/16" x 3/4" 
                                              (26.99mm x 19.05mm)
        with Special Tooling 6" in 1/8"  (152mm x 3.18mm
     Depth of Throat 12"  (304.8mm)
     Stroke /per/min (0.60 in)  30
     Stroke Depth adjustable.   Adjustable Back Stop
     Two Piece Gauging Table
 SHEARING CAPACITY:
     Blade Length 14" (356mm)  
     Flat Bar Shear 14" in 9/16", (355.6mm  in 14.29mm)
     12" in 3/4"  (304.8mm  in 19.05mm)
     Angle Flange Trim 4" (101.6mm)
ANGLE SHEAR:
    at 90 degrees 9" x 5" x 1/2"  (127mm x 127mm x 12.7mm)
    at 45 degrees 2½" x 2½" x 5/162" (63.5mm x 63.5mm x 7.94mm)
ROUND and SQUARE BAR SHEAR:
   Round thru 1½"  (38.1mm)
   Squares thru 1½" x 1½"  (38.1mm x38.1mm
   Channels and H-Beams 5"  (127mm)
RECTANGULAR NOTCHER CAPACITY: (9mm)
   90 degree Notcher  3½" x 3½" x 3/8"
             (88.9mm x 88.9mm x 9.5mm)
   Pipe Notcher 1½" – 40
  Squaring Guide
SPECIAL TOOLING: “CAPACITY ONLY"
   V-Press Brake 10" x ⅝"    Multi Vee 20" x 3/16"
   Pipe Notcher 4",    Angle Bending 4" x ¼
MOTOR DRIVE: Wired 230 volts, 3-phase 
   Hydraulic Pump7½ hp. (5.5kw) 220/440 volts
CONTROLS:  Wired Low Voltage
   Two Full Controls Foot Pedals.
   Pump Start/Stop Buttons. 
   Auto Manual Switch.   Normal / Jog Switch.
   Shear / Notch Switch.  Main On/Off
EQUIPPED WITH:
   (41) Punch & Die Sets.
   Two Piece Gaging on Notcher & Punch area. 
   Standard Punch & Die Holders.
   1-Oversize Die Holder.
   1-Magnetic Base Work Lig 
    Point of Operation Safety Guards at each cutting station.
    Fork Lift Accommodations.
COMPLETE FACTORY SAFETY GUARDS

Dimensions: 68" L x 31" W x 67" Ht.
   (1,727.2mm L x 787.4mm W x 1,701.8 mm Ht )
Approximate weight 3,969 lbs.

Discover quality refurbished Fabrication Equipmantf at CENTURY MACHINERY COMPANYINC. Contact us at 1-213-627-2847  if you need a machine not available.

Related products...