Hem H130HM-DC Horizontal Band Saw Capacity 18 inch height x 20 inch width, Blade Speeds 72 thru 400 fpm, Hydraulic Down Feed, Vise, & Blade Tension, Drive 10-hp, Blade Width-1.5 inch, Augar, Serial Number 52419, Front, Ref 10541-1
Hem H130HM-DC Horizontal Band Saw Capacity 18 inch height x 20 inch width, Blade Speeds 72 thru 400 fpm, Hydraulic Down Feed, Vise, & Blade Tension, Drive 10-hp, Blade Width-1.5 inch, Augar, Serial Number 52419, Band Wheel Guards Doors Open, Ref 10541-2
Hem H130HM-DC Horizontal Band Saw Capacity 18 inch height x 20 inch width, Blade Speeds 72 thru 400 fpm, Hydraulic Down Feed, Vise, & Blade Tension, Drive 10-hp, Blade Width-1.5 inch, Augar, Serial Number 52419, LS-F, Ref 10541-3
Hem H130HM-DC Horizontal Band Saw Capacity 18 inch height x 20 inch width, Blade Speeds 72 thru 400 fpm, Hydraulic Down Feed, Vise, & Blade Tension, Drive 10-hp, Blade Width-1.5 inch, Augar, Serial Number 52419, Operator Control Station, Ref 10541-4
Hem H130HM-DC Horizontal Band Saw Capacity 18 inch height x 20 inch width, Blade Speeds 72 thru 400 fpm, Hydraulic Down Feed, Vise, & Blade Tension, Drive 10-hp, Blade Width-1.5 inch, Augar, Serial Number 52419, Close-up Operator Control Station, Ref 10541-5
Hem H130HM-DC Horizontal Band Saw Capacity 18 inch height x 20 inch width, Blade Speeds 72 thru 400 fpm, Hydraulic Down Feed, Vise, & Blade Tension, Drive 10-hp, Blade Width-1.5 inch, Augar, Serial Number 52419, Right End, Ref 10541-6
Hem H130HM-DC Horizontal Band Saw Capacity 18 inch height x 20 inch width, Blade Speeds 72 thru 400 fpm, Hydraulic Down Feed, Vise, & Blade Tension, Drive 10-hp, Blade Width-1.5 inch, Augar, Serial Number 52419, R-Rear, Ref 10541-7
Hem H130HM-DC Horizontal Band Saw Capacity 18 inch height x 20 inch width, Blade Speeds 72 thru 400 fpm, Hydraulic Down Feed, Vise, & Blade Tension, Drive 10-hp, Blade Width-1.5 inch, Augar, Serial Number 52419, Close-up Hydraulic Pump, Ref 10541-8
Hem H130HM-DC Horizontal Band Saw Capacity 18 inch height x 20 inch width, Blade Speeds 72 thru 400 fpm, Hydraulic Down Feed, Vise, & Blade Tension, Drive 10-hp, Blade Width-1.5 inch, Augar, Serial Number 52419, Rear, Ref 10541-9
Hem H130HM-DC Horizontal Band Saw Capacity 18 inch height x 20 inch width, Blade Speeds 72 thru 400 fpm, Hydraulic Down Feed, Vise, & Blade Tension, Drive 10-hp, Blade Width-1.5 inch, Augar, Serial Number 52419, Close-up Left Blade Guide Post Ref 10541-10
Hem H130HM-DC Horizontal Band Saw Capacity 18 inch height x 20 inch width, Blade Speeds 72 thru 400 fpm, Hydraulic Down Feed, Vise, & Blade Tension, Drive 10-hp, Blade Width-1.5 inch, Augar, Serial Number 52419, Right Blade Guide Post & Blade Wheel Guard Ref 10541-11
10541 11 Right Blade Guide Post - Century Machinery
Hem H130HM-DC Horizontal Band Saw Capacity 18 inch height x 20 inch width, Blade Speeds 72 thru 400 fpm, Hydraulic Down Feed, Vise, & Blade Tension, Drive 10-hp, Blade Width-1.5 inch, Augar, Serial Number 52419, Close-up crap Augar Ref 10541-12
Hem H130HM-DC Horizontal Band Saw Capacity 18 inch height x 20 inch width, Blade Speeds 72 thru 400 fpm, Hydraulic Down Feed, Vise, & Blade Tension, Drive 10-hp, Blade Width-1.5 inch, Augar, Serial Number 52419, Left Blade Wheel Guard Ref 10541-11
Hem H130HM-DC Horizontal Band Saw Capacity 18 inch height x 20 inch width, Blade Speeds 72 thru 400 fpm, Hydraulic Down Feed, Vise, & Blade Tension, Drive 10-hp, Blade Width-1.5 inch, Augar, Serial Number 52419,ID Tag Ref 10541-14

HEM 18 inch x 20 inch Horizontal Band Saw Model H130HM-DC, Blade Speeds 72 thru 400 fpm, Power Down Feed, Blade Tension and Vise by Hydraulic. Blade 1½ inch width Chip Augar, Serial Number 524196, Inventory Reference S0653-10541

Model Number: H130HM-DC

Serial Number: 524196

Reference No: Horizontal Band Saw & S0653-10541

Condition: used

Mfg Date:

Model Number H130HM-DC

Serial Number 524196

Reference Number Horizontal Band Saw & S0653-10541

Read More
1-213-627-2847
Category: Tag:

Description

 Hem Horizontal Band Saw

Model H130HM-DC. Serial Number 524196 Year Built 1996

SPECIFICATIONS
CAPACITIES:
Round 18″ (457.2mm)
Rectangular H x W 18″ x 20″ (457.2m x 508mm)
BLADE:
Cutting Speeds Variable 72 thru 400 FPM.
Size: Width x Thickness x Length 1½” x 0.050″ x 19’
(381 x 1,27 x 5791.2mm)
Variable Cutting Pressure 0 thru 1,000 lbs.
Blade Tension Adjustment Power
FEED DOWN RATE 0 thru 3 IPS.
Cutting Pressure Gage and Adjustment Dial,
Feed Rate Dial,
SAW VISE:
Opening Maximum Width 22” ( 558.8mm)
Adjustment Control Power Clamping
Clamping Pressure 0 thru 1,500 lbs.
VISE OPENING, Maximum 22” Wide (558.8mm)
MOTOR DRIVES: wired 440 volts, 3 phase
Blade Drive (two Speed) 10 hp.(7.35kw) 460 volts
Hydraulic Pump 2 hp. (1.47kw) 230/460 volts
Coolant Pump 1/4 hp. (0.184kw) 230/460 volts
Chip Augar 1/8 hp. (0.092 kw)
EQUIPPED WITH:
Full Stroking Hydraulic Vise.
Power Guide Arms. Powered Blade Tension.
Downfeed Hydraulically Regulated.
Power Lift for elevating the blade frame.
Chip Augar. Coolant Pump and Pan.
Material Work Light, Wash Down Hose
CONTROLS CONSOLE, Swing Away
MOTOR: Off/On/Start Switch with Light.
SAW VISE: Open/Stop/Close Switch with Light.
ARM: Rise/Lower.
SAW DRIVE: Start/Stop Switch.
EMERGENCY STOP BUTTON.
AUGER: Auto/Off/On Switch, Auger: Min/Max. Speed Dial.
COOLANT: Auto/Off/On Switch.
DISCHARGE VISE: Open/Stop/Close.
LED: Blade Speed Readout Arm Descent (Inches Per Minute),
Arm Descent Reset Button.
GUIDE: Out/Stop/In Switch. Speed Adjustment Dial.
ENHANCETR: Auto/Off/On Switch. Enhance Start Enhance On Light.
CUT WATCHER: with DRO, Sensitivity Dial & On/Off /Reset Switch.
BLADE TENSION: Manual Control.
BROKEN BLADE – OUT of STOCK Warning light,
(Auto Blade Break Shut Down).
PANIC BUTTON.
COMPLETE FACTORY SAFETY GUARDS

Dimensions: 11’ L x 80″ W x 9’ Ht.
(3,6576MM X 2,032mm x 2743.2mm)
Approximate Weight 8,000 lbs.</pre>

 

Contact us now.

 Hem Horizontal Band Saw
Model H130HM-DC.    Serial Number 524196     Year Built 1996

SPECIFICATIONS
CAPACITIES:
    Round 18"  (457.2mm)
    Rectangular H x W 18" x 20"  (457.2m x 508mm)
BLADE:
    Cutting Speeds Variable 72 thru 400 FPM.
    Size: Width x Thickness x Length 1½" x 0.050" x 19’  
                               (381 x 1,27 x 5791.2mm)
    Variable Cutting Pressure 0 thru 1,000 lbs.
    Blade Tension Adjustment Power
FEED DOWN RATE 0 thru 3 IPS.
    Cutting Pressure Gage and Adjustment Dial,
    Feed Rate Dial,   
SAW VISE:
    Opening Maximum Width 22” ( 558.8mm)
    Adjustment Control  Power Clamping
    Clamping Pressure 0 thru 1,500 lbs.
VISE OPENING, Maximum 22” Wide (558.8mm)
MOTOR DRIVES: wired 440 volts, 3 phase
    Blade Drive (two Speed) 10 hp.(7.35kw) 460 volts
    Hydraulic Pump 2 hp. (1.47kw)  230/460 volts
    Coolant Pump 1/4 hp. (0.184kw) 230/460 volts
    Chip  Augar 1/8 hp. (0.092 kw)
EQUIPPED WITH:
     Full Stroking Hydraulic Vise.
     Power Guide Arms.   Powered Blade Tension.                 
     Downfeed Hydraulically Regulated.
     Power Lift for elevating the blade frame.
     Chip Augar.   Coolant Pump and Pan.
     Material Work Light,        Wash Down Hose
CONTROLS CONSOLE, Swing Away
    MOTOR: Off/On/Start Switch with Light.
    SAW VISE: Open/Stop/Close Switch with Light.
    ARM: Rise/Lower.
    SAW DRIVE: Start/Stop Switch.
    EMERGENCY STOP BUTTON.  
    AUGER: Auto/Off/On Switch, Auger: Min/Max. Speed Dial.
    COOLANT: Auto/Off/On Switch.     
    DISCHARGE VISE: Open/Stop/Close.
    LED: Blade Speed Readout Arm Descent (Inches Per Minute),
      Arm Descent Reset Button.
    GUIDE: Out/Stop/In Switch.   Speed Adjustment Dial.        
    ENHANCETR:   Auto/Off/On Switch.  Enhance Start  Enhance On Light.
    CUT WATCHER: with DRO, Sensitivity Dial & On/Off /Reset Switch.
    BLADE TENSION: Manual Control.
    BROKEN BLADE - OUT of STOCK Warning light, 
        (Auto Blade Break Shut Down).
    PANIC BUTTON.
COMPLETE FACTORY SAFETY GUARDS

Dimensions: 11’ L x 80" W x  9’ Ht.
        (3,6576MM X 2,032mm x 2743.2mm)
Approximate Weight 8,000 lbs.

Related products...