Description
“NEW” Hem Femi Horizontal Mitering Head Band Saw
Model 22100DA-XL. Serial Number 8.48.7077
SPECIFICATIONS
CAPACITIES:
Mitetr One Way 60 degrees
Rectangular W x H 5.4″ x 7.4″ (137.16.mm x 187.96mm)
Round 6.9″ (175.26mm)
BLADE:
Cutting Speeds Six Variable Spped
Size: Width x Thickness x Length 1½” x 0.050″ x 19’
(381 x 1,27 x 5791.2mm)
Variable Cutting Pressure 0 thru 1,000 lbs.
Blade Tension Adjustment Power
FEED DOWN RATE 0 thru 3 IPS.
Cutting Pressure Gage and Adjustment Dial,
Feed Rate Dial,
SAW VISE:
Opening Maximum Width 22” ( 558.8mm)
Adjustment Control Power Clamping
Clamping Pressure 0 thru 1,500 lbs.
VISE OPENING, Maximum 22” Wide (558.8mm)
MOTOR DRIVES: wired 440 volts, 3 phase
Blade Drive (two Speed) 10 hp.(7.35kw) 460 volts
Hydraulic Pump 2 hp. (1.47kw) 230/460 volts
Coolant Pump 1/4 hp. (0.184kw) 230/460 volts
Chip Augar 1/8 hp. (0.092 kw)
EQUIPPED WITH:
Full Stroking Hydraulic Vise.
Power Guide Arms. Powered Blade Tension.
Downfeed Hydraulically Regulated.
Power Lift for elevating the blade frame.
Chip Augar. Coolant Pump and Pan.
Material Work Light, Wash Down Hose
CONTROLS CONSOLE, Swing Away
MOTOR: Off/On/Start Switch with Light.
SAW VISE: Open/Stop/Close Switch with Light.
ARM: Rise/Lower.
SAW DRIVE: Start/Stop Switch.
EMERGENCY STOP BUTTON.
AUGER: Auto/Off/On Switch, Auger: Min/Max. Speed Dial.
COOLANT: Auto/Off/On Switch.
DISCHARGE VISE: Open/Stop/Close.
LED: Blade Speed Readout Arm Descent (Inches Per Minute),
Arm Descent Reset Button.
GUIDE: Out/Stop/In Switch. Speed Adjustment Dial.
ENHANCETR: Auto/Off/On Switch. Enhance Start Enhance On Light.
CUT WATCHER: with DRO, Sensitivity Dial & On/Off /Reset Switch.
BLADE TENSION: Manual Control.
BROKEN BLADE – OUT of STOCK Warning light,
(Auto Blade Break Shut Down).
PANIC BUTTON.
COMPLETE FACTORY SAFETY GUARDS
Dimensions: 11’ L x 80″ W x 9’ Ht.
(3,6576MM X 2,032mm x 2743.2mm)
Approximate Weight 8,000 lbs.</pre>
Hem Horizontal Band Saw
Model H130HM-DC. Serial Number 524196 Year Built 1996
SPECIFICATIONS
CAPACITIES:
Round 18″ (457.2mm)
Rectangular H x W 18″ x 20″ (457.2m x 508mm)
BLADE:
Cutting Speeds Variable 72 thru 400 FPM.
Size: Width x Thickness x Length 1½” x 0.050″ x 19’
(381 x 1,27 x 5791.2mm)
Variable Cutting Pressure 0 thru 1,000 lbs.
Blade Tension Adjustment Power
FEED DOWN RATE 0 thru 3 IPS.
Cutting Pressure Gage and Adjustment Dial,
Feed Rate Dial,
SAW VISE:
Opening Maximum Width 22” ( 558.8mm)
Adjustment Control Power Clamping
Clamping Pressure 0 thru 1,500 lbs.
VISE OPENING, Maximum 22” Wide (558.8mm)
MOTOR DRIVES: wired 440 volts, 3 phase
Blade Drive (two Speed) 10 hp.(7.35kw) 460 volts
Hydraulic Pump 2 hp. (1.47kw) 230/460 volts
Coolant Pump 1/4 hp. (0.184kw) 230/460 volts
Chip Augar 1/8 hp. (0.092 kw)
EQUIPPED WITH:
Full Stroking Hydraulic Vise.
Power Guide Arms. Powered Blade Tension.
Downfeed Hydraulically Regulated.
Power Lift for elevating the blade frame.
Chip Augar. Coolant Pump and Pan.
Material Work Light, Wash Down Hose
CONTROLS CONSOLE, Swing Away
MOTOR: Off/On/Start Switch with Light.
SAW VISE: Open/Stop/Close Switch with Light.
ARM: Rise/Lower.
SAW DRIVE: Start/Stop Switch.
EMERGENCY STOP BUTTON.
AUGER: Auto/Off/On Switch, Auger: Min/Max. Speed Dial.
COOLANT: Auto/Off/On Switch.
DISCHARGE VISE: Open/Stop/Close.
LED: Blade Speed Readout Arm Descent (Inches Per Minute),
Arm Descent Reset Button.
GUIDE: Out/Stop/In Switch. Speed Adjustment Dial.
ENHANCETR: Auto/Off/On Switch. Enhance Start Enhance On Light.
CUT WATCHER: with DRO, Sensitivity Dial & On/Off /Reset Switch.
BLADE TENSION: Manual Control.
BROKEN BLADE – OUT of STOCK Warning light,
(Auto Blade Break Shut Down).
PANIC BUTTON.
COMPLETE FACTORY SAFETY GUARDS
Dimensions: 11’ L x 80″ W x 9’ Ht.
(3,6576MM X 2,032mm x 2743.2mm)
Approximate Weight 8,000 lbs.</pre>
Hem Horizontal Band Saw
Model H130HM-DC. Serial Number 524196 Year Built 1996
SPECIFICATIONS
CAPACITIES:
Round 18" (457.2mm)
Rectangular H x W 18" x 20" (457.2m x 508mm)
BLADE:
Cutting Speeds Variable 72 thru 400 FPM.
Size: Width x Thickness x Length 1½" x 0.050" x 19’
(381 x 1,27 x 5791.2mm)
Variable Cutting Pressure 0 thru 1,000 lbs.
Blade Tension Adjustment Power
FEED DOWN RATE 0 thru 3 IPS.
Cutting Pressure Gage and Adjustment Dial,
Feed Rate Dial,
SAW VISE:
Opening Maximum Width 22” ( 558.8mm)
Adjustment Control Power Clamping
Clamping Pressure 0 thru 1,500 lbs.
VISE OPENING, Maximum 22” Wide (558.8mm)
MOTOR DRIVES: wired 440 volts, 3 phase
Blade Drive (two Speed) 10 hp.(7.35kw) 460 volts
Hydraulic Pump 2 hp. (1.47kw) 230/460 volts
Coolant Pump 1/4 hp. (0.184kw) 230/460 volts
Chip Augar 1/8 hp. (0.092 kw)
EQUIPPED WITH:
Full Stroking Hydraulic Vise.
Power Guide Arms. Powered Blade Tension.
Downfeed Hydraulically Regulated.
Power Lift for elevating the blade frame.
Chip Augar. Coolant Pump and Pan.
Material Work Light, Wash Down Hose
CONTROLS CONSOLE, Swing Away
MOTOR: Off/On/Start Switch with Light.
SAW VISE: Open/Stop/Close Switch with Light.
ARM: Rise/Lower.
SAW DRIVE: Start/Stop Switch.
EMERGENCY STOP BUTTON.
AUGER: Auto/Off/On Switch, Auger: Min/Max. Speed Dial.
COOLANT: Auto/Off/On Switch.
DISCHARGE VISE: Open/Stop/Close.
LED: Blade Speed Readout Arm Descent (Inches Per Minute),
Arm Descent Reset Button.
GUIDE: Out/Stop/In Switch. Speed Adjustment Dial.
ENHANCETR: Auto/Off/On Switch. Enhance Start Enhance On Light.
CUT WATCHER: with DRO, Sensitivity Dial & On/Off /Reset Switch.
BLADE TENSION: Manual Control.
BROKEN BLADE - OUT of STOCK Warning light,
(Auto Blade Break Shut Down).
PANIC BUTTON.
COMPLETE FACTORY SAFETY GUARDS
Dimensions: 11’ L x 80" W x 9’ Ht.
(3,6576MM X 2,032mm x 2743.2mm)
Approximate Weight 8,000 lbs.
