FARNHAM ROLL FORMING MACHINE
Model 1010-EXX, Serial Number 7-42-17
SPECIFICATIONS
CAPACITY:
Overall Length of Rolls (actual length 121″ (3,073.4mm)
Thickness 1/8″ (3.1750mm)
Minimum Radius 0.8438″ (21.43252mm)
ROLL DIAMETER:
Top Roll 1-11/16″ (1.6875″) (42.8675mm)
Bottom Rolls 1-15/16″ (1.9375″) (49.2125mm)
TOP ROLL LIFT MOTORS
Geared motor to screw located on each end.
Mechanical Counter for each end of Top Roll
Each motor with Electric Brake.
BOTTOM ROLLS:
Each with In/Out Adjustment and Indicators located on both end.
OUT-BOARD TEFLON SUPPORT ROLLS: located on
each side (Five) x 2″ diameter (five x 50.8mm)
TIE ROD BED ADJUSTMENT to put slight bow in bed.
MOTOR DRIVES: Wired 440 volts, 3-phase
All Rolls driven thru Geared Box by 2-Speed Motor 1 & 2 hp.
(0.,75 & 1.47kw) 440 volts
Top Roll Elevation Motors (Two) each 3 & 3/4 hp.
(2.2 & 0.55kw) 440 volts
CONTROLS:
Allen Bradley 1745-TCAT Motor Controller.
Roll Drive Motor Start/Stop Buttons.
Two Roll Speed in Forward/ One Roll Speed in Reverse.
TOP ROLL Up/Down buttons to adjust BOTH END elevation screws at same time.
TOP ROLL Up/Down buttons to independently adjust EACH END elevation screws.
Roll Forward/Reverse switch line located on front and rear.
Safety Stop Line located below front and rear bottom rolls.
COMPLETE FACTORY SAFETY GUARDS
Dimensions 41″ FB x 191″LR x 107″ Height
(0421.4mm FB x 4,851.4mm LR x 2,717.8mm height)
Approximate Weight 8500 lbs.
![10' Farnham Aircraft Roll Forming Machine 10 ft. Length, Model 1058-E, Material thickness 0.0938", Minimum Radius 0.6250", Top Roll 1.0" diameter, Bottom Rolls 1.75 in diameter, Serial Number 2-43-14 [R4510-10471]](https://centurymachinery.com/wp-content/uploads/2021/04/10471-15A-farnham-roll-forming-10-ft-1058-E-thick-0.0938-in-radius-0.6250-in-top-roll-1.0-in-dia-bottom-roll-1.75-in-dia-F-300x300.jpg "10 foot Farnham Model 1058-E Aircraft Roll Forming Machine 10 ft. Length - Material thickness 0.094\" - Minimum Radius 0.625\" - Top Roll 1.0\" diameter - Bottom Rolls 1.75\" diameter, Serial Number 2-43-14, Inventory Reference R4510-10471 - Century Machinery")
![10 Ton Jetline Universal Power Tank Turning Rolls, Diameter Range 7" thru 112", Wheel 12" diameter x 6" width, Power unit Varible Speed Drive Motor 115 volts, Serial Number 12223 [R5640-10359]](https://centurymachinery.com/wp-content/uploads/2021/04/10359-1-10-ton-jetline-universal-power-tank-turning-rolls-dia-range-7-in-112-in-wheel-12-in-dia-x-6-in-width-power-unit-vari-drive-115v-Driver-_-Idler-300x300.jpg "10 Ton Jetline Universal Power Tank Turning Rolls, Diameter Range 7\" thru 112\", Wheel 12\" diameter x 6\" width, Power unit Varible Speed Drive Motor 115 volts, Serial Number 12223 [R5640-10359] - Century Machinery")
