Description
VERSON STRAIGHT SIDE HYDRAULIC PRESS
Model 3000-HD3-240-72-4,
Serial Number 24629
SPECIFICATIONS:
CAPACITY TONS 3000
STROKE 36"
SHUT HEIGHT 68" (Originally 36" with 32" column extensions)
BOLSTER:
Area 216" L-R x 120" F-B x 11.5" High
Rolling Riser Plate on Bolster 8" High
SPEED RATE:
Fast Advance 500 inch / minute.
Fast Return 500 inch / minute
1000 tons @ 101 inch / minute.
2000 tons @ 50.5 inch / minute.
3000 tons @ 33.6 inch / minute.
Cushion Return 165 inch / minute.
MOTOR DRIVE:
3-Pumps each: 172 H.P., 880 rpm, 460 volts 3 Phase
CONTROLS:
Siemens Touch Panel, TP27 (operating original relay controls)
EQUIPPED WITH:
Cushion (4 pads with 150 Ton cushion and Stripper capacity)
Reservoir Capacity 1900 gallons
COMPLETE FACTORY SAFETY GUARDS
Dimensions: Press 342" Tall from Floor. Base is 125" below floor Level.
Width 300" x Depth 152" . Ram 10 feet tall x 252" wide x 120" deep.
DIMENSIONS & WEIGHT:
CROWN 60" Ht. x 316" L x 148" W Weight 217,000 lbs.
RAM 123" Ht. x 240" L x 118" W Weight 180,000 lbs.
BED 324” L x 148” W x 120" H 268,000 lbs.
(4) COLUMNS 30" x 36” x 180" L Weight 22,500 lbs each.
(4) CUSHIONS Weight 12,000 lbs each.
(2) PULL BACK CYLINDERS Weight 4,200 lbs each.
(3) MAIN CYLINDERS ASSEMBLIES Weight 26,000lbs each.
(4) TIE RODS & NUTS 18" diameter x 320" L Weight 22,800 lbs each.
OIL RESIVOIR ASSEMBLY 36' W X 36" H X 320" L Weight 40,000 lbs.
BOLSTER 240" L x 140" W x 24" H Weight 56,200 lbs.
Miscellaneous Parts Weight 15,000 lbs
![60,000 Ton, Verson Wheelon Fluid Cell Forming Press, Model 60000R-50-240, Forming Pressure 10,000 psi, Forming Depth to 10", 2-trays, Depth 6" & 10", Serial Number 21600 [P5206-7106]](https://centurymachinery.com/wp-content/uploads/2021/04/7106-1_verson-wheelon-fluid-forming-press_60000R-50-240_form-press-10K-psi_50-in-x-240-in_depth-10-in_2-trays_Serial-21600-300x300.jpg "60000 Ton Verson Wheelon 60000R-50-240 Fluid Cell Forming Press Forming Pressure 10000 psi Forming Depth 6 inch and 10 inch with-in two trays, Serial Number 21600, Inventory Reference P5206-7106 - Century Machinery")
![50 Tons capacity, Hannifin C-Frame Hydraulic Press, Stroke 27", Throat Depth 13.5", Open Height 29.5", Up Acting ram, Bed 22" x 34.5", Serial NA [P5102-6300]](https://centurymachinery.com/wp-content/uploads/2021/04/6300_hannifin-C-frame-hyd-press_50-T_DA-ram-5.5-in-dia_str-27-in_4-in-dia-lower-up-acting-ram-300x300.jpg "Hannifin 50 ton C-Frame Hydraulic Press with additional Up-acting Cylinder, Stroke Down 27 inch, Throat Depth 13.5 inch, Open Height 29.5 inch, Up Acting ram, Bed 22 inch x 34.5 inch, Serial NA, Inventory Reference P5102-6300 - Century Machinery")
