Description
VERSON WHEELON FLUID CELL FORMING PRESS
Model 60000R-50-240, Serial Number 21600
SPECIFICATIONS
DIRECT ACTING HYDRAULIC, FLEX-DIE RUBBER PAD,
CAPACITY TONNAGE 60,000
FORMING PRESSURE: Maximum 10,000 psi.
TRAYS: Two
Tray Size at Top 50" x 240",270 mm x 6,096mm)
Tray Area at 6 inches (152.4mm) Depth 42½" x
233" (1,079.5mm x 5,918.2mm)
Tray Area at 10 inches (254mm) Depth 37½" x
228" (952.5mm x 5,791.1mm)
(Filler Plates available reduces depth of Trays to 6" (152.4mm)
MOTOR DRIVES: All motors wired 440 volts, 3-phase
(2) Evacuate High Pressure Pumps 150 hp. and 75 hp. (110.33kw & 55.2kw)
(1) Accumulator charge Pump 30 hp. (22.07kw)
(1) Tray Pump 20 hp. (14.71kw)
(1) Pilot Pressure Pump 20 hp. (14.7kw)
(1) Vacuum & Cooler Pump 15 hp. (11.1kw)
(1) Pad Vacuum Pump 1 hp. (0.74kw)
(1) Cano-Micro Clean Oil Filter ¼ hp. (0.184kw)
(1) Roll Cover Pump 3 hp. (2.21kw)
CONTROLS: Wired 115 volts
(1) Operator Control Station.
(2) Side Controls Stations located Right & Left end
of barrel with Emergency Stop Buttons.
EQUIPPED WITH:
(2) Throw Pad Roll-Up devices.
Electrical Starter Panels.
(1) Extra Fluid Cell.
(1) Extra Rubber Pad.
COMPLETE FACTORY SAFETY GUARDS
Approximate total weight 725,000 lbs.
![60,000 Ton, Verson Wheelon Fluid Cell Forming Press, Model 60000R-50-240, Forming Pressure 10,000 psi, Forming Depth to 10", 2-trays, Depth 6" & 10", Serial Number 21600 [P5206-7106]](https://centurymachinery.com/wp-content/uploads/2021/04/7106-1_verson-wheelon-fluid-forming-press_60000R-50-240_form-press-10K-psi_50-in-x-240-in_depth-10-in_2-trays_Serial-21600.jpg "7106-1_verson wheelon fluid forming press_60000R-50-240_form press 10K psi_50 in x 240 in_depth 10 in_2-trays_Serial 21600")
![60,000 Ton, Verson Wheelon Fluid Cell Forming Press, Model 60000R-50-240, Forming Pressure 10,000 psi, Forming Depth to 10", 2-trays, Depth 6" & 10", Serial Number 21600 [P5206-7106]](https://centurymachinery.com/wp-content/uploads/2021/04/7106-2_verson-wheelon-fluid-forming-press_60000R-50-240_form-press-10K-psi_50-in-x-240-in_depth-10-in_2-trays_Serial-21600.jpg "7106-2_verson wheelon fluid forming press_60000R-50-240_form press 10K psi_50 in x 240 in_depth 10 in_2-trays_Serial 21600")
![Cincinnati Hydroform Hydraulic Fluid Forming Press, Model 12-15-7, 15,000 psi Forming Pressure, Blank Diameter 12", Draw depth 7", Flush Floor Mounted, Serial 4C1V1Y-Z [P5206-5795]](https://centurymachinery.com/wp-content/uploads/2021/04/5795_cincinnati-hydroform-press_size-12-15-7_round-chamber_four-post-design_Serial-4C1V1Y-Z-300x300.jpg "Cincinnati Hydroform 4-Post Hydraulic Fluid Forming Press, Model 12-15-7, Forming Pressure 15,000 psi, Blank Diameter 12\", Draw Depth 7\", Flush Floor Mounted, Serial Number 4C1V1Y-Z [P5206-5795] - Century Machinery")
![100 Tons capacity, OTC Power Team H- Frame Hydraulic Press, Model SPF100, Traveling Ram, Stroke 13-1/8", Bed 50" L x 17" W, Vertical height 40", 3 hp, Serial Number 0206U00281 [P5102-10137]](https://centurymachinery.com/wp-content/uploads/2021/04/10137-1-otc-power-team-H-frame-hyd-press-100T-SPF100-trav-ram-str13.125-in-50-in-x-17-in-VH-40-in-3-hp-Serial-0206U00281-F-Right-300x300.jpg "OTC Power Team 100 ton Traveling Ram H- Frame Hydraulic Press Model SPF100, Stroke 13.125 inch Bed 50 inch length x 17 inch width Vertical height 40 inch, 3 hp, Serial Number 0206U00281, Inventory Reference P5102-10137 - Century Machinery")
