avure quintus fluid cell forming, cavity die forming press,QRL-63, 2-blank diamters 42.9 inch & 26.9 inch 2-forming pessures 9100 psi & 23200 psi, draw depth 12.3 inch, tooling suttle table, Serial Number l4689.1000-1, F-R, Inventory Reference P5206-10130-1
avure quintus fluid cell forming, cavity die forming press, QRL-63, 2-blank diamters 42.9 inch & 26.9 inch 2-forming pessures 9100 psi & 23200 psi, draw depth 12.3 inch, tooling suttle table, Serial Number l4689.1000-1, L-F, Inventory Reference P5206-10130-2
avure-quintus-fluid-cell-form-pressQRL-63-2-blank-diamters-42.9-in-26.9-in-2-forming-pessures-9100-psi-23200-psi-draw-12.3-in-tooling-suttle-taSerial-l4689.1000-1-Rear-L-Side-1.
avure quintus fluid cell forming, cavity die forming press, QRL-63, 2-blank diamters 42.9 inch & 26.9 inch 2-forming pessures 9100 psi & 23200 psi, draw depth 12.3 inch, tooling suttle table, Serial Number l4689.1000-1, CRT Operator Controls, Inventory Reference P5206-10130-6
avure quintus fluid cell forming, cavity die forming press, QRL-63, 2-blank diamters 42.9 inch & 26.9 inch 2-forming pessures 9100 psi & 23200 psi, draw depth 12.3 inch, tooling suttle table, Serial Number l4689.1000-1, Operator Controls, Inventory Reference P5206-10130-4
avure quintus fluid cell forming, cavity die forming press, QRL-63, 2-blank diamters 42.9 inch & 26.9 inch 2-forming pessures 9100 psi & 23200 psi, draw depth 12.3 inch, tooling suttle table, Serial Number l4689.1000-1, Electric Control Cabinet, Inventory Reference P5206-10130-5
avure quintus fluid cell forming, cavity die forming press, QRL-63, 2-blank diamters 42.9 inch & 26.9 inch 2-forming pessures 9100 psi & 23200 psi, draw depth 12.3 inch, tooling suttle table, Serial Number l4689.1000-1, 27.7 inch diameter Cell, Inventory Reference P5206-10130-8
avure quintus fluid cell forming, cavity die forming press, QRL-63, 2-blank diamters 42.9 inch & 26.9 inch, 2-forming pessures 9100 psi & 23200 psi, draw depth 12.3 inch, tooling suttle table, Serial Number l4689.1000-143 inch diameter Cell, Inventory Reference P5206-10130-7

Avure Quintus QRL-63 Fluid Cell Deep Drawing and Cavity Forming Press Blank diameter 42.9 inch and 26.9 inch Draw Depth 12.3 inch, hydroforming Pressure 9100 psi and 23200 psi, Serial Number L4689-1000-1, Inventory Reference P5206-10130

Model Number: QRL-63, Quintas

Serial Number: L4689.1000.1

Reference No: Fluid Cell Hydro Forming Press, CELL Deep Draw, Cavity Die Forming Press & P5206-10130

Condition: used, Excellent

Mfg Date:

Model Number QRL-63, Quintas

Serial Number L4689.1000.1

Reference Number Fluid Cell Hydro Forming Press, CELL Deep Draw, Cavity Die Forming Press & P5206-10130

Read More
1-213-627-2847
Categories: , , , , , , , , , Tags: , , ,

Description

1 – used  Avure Quintus  FLUID CELL FORMING PRESS Model QRL-63,   Cavity Die & Deep Drwing Forming Press   Serial Number L4689.1000-1

Avure Quintus

 SPECIFICATIONS: TWO FLUID FORM UNITS AVAIABLE WITH THIS PRESS 1st Fluid Form Unit Φ =1120 mm BLANK DIAMETER, Maximum….. 42.9″  (1100 mm) DRAW DEPTH, Maximum………… 12.3″  (315 mm) FORMING PRESSURE, Maximum…..9,100 psi (63 MPa) Tonnage.. 6,610 Nominal diameter…..43.7″  (1120 mm) Outer diameter, cylinder…. 57.3″  (1469 mm) Outer diameter, piston fastener… 68.6″  (1760 mm) Height (unloaded … 39″ (1000 mm) Total weight 18,743 lbs. (8500 kg)   Oil volume 108 US gal. 2nd Fluid Form Unit Φ =1120 mm BLANK DIAMETER, Maximum… 26.9″  (710 mm) DRAW DEPTH, Maximum… 12.3″  (315 mm) FORMING PRESSURE, Maximum… 23,200 psi (160 MPa) Tonnage… 6,930 Nominal diameter …  27.7″ (710 mm) Outer diameter, cylinder… 43.5″  (1115 mm) Outer diameter, piston fastener … 42.9″ square (1100 mm) square Height (unloaded … 39″  (1000 mm) Total weight 10,584 lbs. (4800 kg)  Oil volume 39.6 US gal. Type of Oil Castor oil 1172-1011-106 SPEED of OPERATION SEQUENCE (Hydroforming)     AUTO MODE: Mobile Table in to press (Fast & Slow). Press (Advance, Press Speed, Inching Speed, Hold Time, Decompression, Return) Mobile Table to Charging Stat. (Table Out Fast & Slow). FAST SPEED: Advance 144 mm/s.  Press Speed 2,7 mm/s. Inching Speed 0,14 mm/s.  Return 144 mm/s. MEDIUM SPEED: Advance 44 mm/s. Press Speed 1,05 mm/s. Inching Speed 0,14 mm/s.  Return 92 mm/s. SLOW SPEED: Advance 5,6 mm/s.  Press Speed 0,14 mm/s. Return 11,77 mm/s. INCH MODE: Mobile Table in to press (Fast & Slow).   Press (Advance, & Return) Mobile Table to Charging Stat (Table Out Fast / Slow). Ejector Cylinder Up /  Down. FAST SPEED: Advance 144 mm/s. Press Speed 2,7 mm/s. Inching Speed 0,14 mm/s. Return 144 mm/s. MEDIUM SPEED: Advance 44 mm/s. Press Speed 1,05 mm/s. Inching Speed 0,14 mm/s.  Return 92 mm/s. SLOW SPEED: Advance 5,6 mm/s.  Press Speed 0,14 mm/s.  Return 11,77 mm/s. SERVICE MODE: Mobile Table in to press (Slow).   Press (Advance, & Return). Mobile Table to Charging  State (Table Out Slow).   Ejector Cylinder Up / Down. FAST SPEED: Advance 144 mm/s. Press Speed 2,7 mm/s.  Inching Speed 0,14 mm/s. Return 144 mm/s. CONTROLS: Located on and with-in MAIN ELECTRICAL CONTROL CABINET: CRT. Circuit Breaker, Relays, Contactors.  Fault Signal System,| Indication Signal Indicators, Announciator Panels, Cycle Counter and Timers, Press Command – Function Push Buttons, Pump Motors Start – Stop Buttons, Press Operation Selector Switches, Emergency Stop Button. OPERATOR MOBIL PUSH BUTTON CONTROL STATION with: Dual Hand Cycle Start Push Buttons, Start – Stop Buttons and Emergency Stop Button. Located on PRESS: CONTROL PANEL FOR PRESSURE: Pressure Gauge. Pressure Set Dial,  Pressure Display, Calibration Button. Ready Auto Button. Ready Inch Button. CONTROL MODE SWITCH: Inch/Auto.  SPEED SWITCH: Slow / Medium / Fast. AUTO MODE Table not out and On switch.  INCH MODE BUTTONS for: Table In/Out, Press Up, Ejection Up/Down Switch. EMERGENCY STOP BUTTON.    PRESSURE SET DIAL. EQUIPPED WITH: 1-Mobil Tool Table. 1-Operator Mobil Control Station. Operation and Part Manuals.  PC Program. 1-Disconnect Switch. MOTOR DRIVE: Wired 460 volts, 3 phase Main Hydraulic Pump…146 hp (108 kw) 460 volts Mobil Table Pump… 17 hp. (13 kw) 460 volts Filter & Coolant Pump …  4.7 hp (3.5 kw) 460 volts COMPLETE FACTORY SAFETY GUARDS Dimensions Height above ground 281.6″ (7150.1mm)  Below ground 37″  (939.8mm) Total over-all 331″ (8407.4mm)Ht. x 205″ (5207mm) F-B x 103.3″ (2623.82mm) Frame (192″ (4876.8mm) L-R with Catwalk) Weight Press 242,500 lbs.      Weight Tool Table 22,100 lbs. Current Replacement Cost 3,500,000.00 USD You may view this item at our warehouse and see photos on our website at www.centurymachinery.com Our Price to you at our Los Angeles, California warehouse is $725,000.00 US DOLLARS Respectfully Submitted, CENTURY MACHINERY CO., INC. Please feel free to contact us for more info.  

1 – used  AVURE (ASEA) QUINTUS FLUID CELL FORMING PRESS

          Model QRL-63,   Cavity Die & Deep Drwing Forming Press   Serial Number L4689.1000-1

 SPECIFICATIONS:
TWO FLUID FORM UNITS AVAIABLE WITH THIS PRESS
1st Fluid Form Unit Φ =1120 mm
     BLANK DIAMETER, Maximum….. 42.9″  (1100 mm)
     DRAW DEPTH, Maximum………… 12.3″  (315 mm)
     FORMING PRESSURE, Maximum…..9,100 psi (63 MPa)
       Tonnage.. 6,610
       Nominal diameter…..43.7″  (1120 mm)
Outer diameter, cylinder…. 57.3″  (1469 mm)
       Outer diameter, piston fastener… 68.6″  (1760 mm)
Height (unloaded … 39″ (1000 mm)
       Total weight 18,743 lbs. (8500 kg)   Oil volume 108 US gal.
 2nd Fluid Form Unit Φ =1120 mm
       BLANK DIAMETER, Maximum… 26.9″  (710 mm)
       DRAW DEPTH, Maximum… 12.3″  (315 mm)
       FORMING PRESSURE, Maximum… 23,200 psi (160 MPa)
          Tonnage… 6,930
          Nominal diameter …  27.7″ (710 mm)
          Outer diameter, cylinder… 43.5″  (1115 mm)
Outer diameter, piston fastener … 42.9″ square (1100 mm) square
          Height (unloaded … 39″  (1000 mm)
      Total weight 10,584 lbs. (4800 kg)  Oil volume 39.6 US gal.
Type of Oil Castor oil 1172-1011-106
SPEED of OPERATION SEQUENCE (Hydroforming)
    AUTO MODE: Mobile Table in to press (Fast & Slow).
Press (Advance, Press Speed, Inching Speed,
         Hold Time, Decompression, Return) Mobile Table to Charging Stat.
(Table Out Fast & Slow).
    FAST SPEED: Advance 144 mm/s.  Press Speed 2,7 mm/s.
Inching Speed 0,14 mm/s.  Return 144 mm/s.

    MEDIUM SPEED: Advance 44 mm/s. Press Speed 1,05 mm/s.
Inching Speed 0,14 mm/s.  Return 92 mm/s.
    SLOW SPEED: Advance 5,6 mm/s.  Press Speed 0,14 mm/s.
Return 11,77 mm/s.
    INCH MODE: Mobile Table in to press (Fast & Slow).   Press
(Advance, & Return) Mobile Table to Charging Stat (Table Out Fast / Slow).
Ejector Cylinder Up /  Down.
    FAST SPEED: Advance 144 mm/s. Press Speed 2,7 mm/s. Inching Speed 0,14 mm/s.
Return 144 mm/s.
    MEDIUM SPEED: Advance 44 mm/s. Press Speed 1,05 mm/s.
Inching Speed 0,14 mm/s.  Return 92 mm/s.
    SLOW SPEED: Advance 5,6 mm/s.  Press Speed 0,14 mm/s.  Return 11,77 mm/s.
    SERVICE MODE: Mobile Table in to press (Slow).   Press (Advance, & Return).
Mobile Table to Charging  State (Table Out Slow).   Ejector Cylinder Up / Down.
    FAST SPEED: Advance 144 mm/s. Press Speed 2,7 mm/s.  Inching Speed 0,14 mm/s.
Return 144 mm/s.
CONTROLS:
    Located on and with-in MAIN ELECTRICAL CONTROL CABINET:
CRT. Circuit Breaker, Relays, Contactors.  Fault Signal System,|
Indication Signal Indicators, Announciator Panels, Cycle Counter and Timers,
Press Command – Function Push Buttons, Pump Motors Start – Stop     
       Buttons, Press Operation Selector Switches, Emergency Stop Button.
      OPERATOR MOBIL PUSH BUTTON CONTROL STATION with:
Dual Hand Cycle Start Push Buttons, Start – Stop Buttons and Emergency Stop Button.
       Located on PRESS: CONTROL PANEL FOR PRESSURE:
Pressure Gauge. Pressure Set Dial,  Pressure Display, Calibration Button.
Ready Auto Button. Ready Inch Button.
       CONTROL MODE SWITCH: Inch/Auto.  SPEED SWITCH: Slow / Medium / Fast.
       AUTO MODE Table not out and On switch.  INCH MODE BUTTONS for: Table In/Out, Press Up, Ejection
            Up/Down Switch.
      EMERGENCY STOP BUTTON.    PRESSURE SET DIAL.
EQUIPPED WITH:
      1-Mobil Tool Table.
1-Operator Mobil Control Station. Operation and Part Manuals.  PC Program.
     1-Disconnect Switch.
MOTOR DRIVE: Wired 460 volts, 3 phase
     Main Hydraulic Pump…146 hp (108 kw) 460 volts
     Mobil Table Pump… 17 hp. (13 kw) 460 volts
     Filter & Coolant Pump …  4.7 hp (3.5 kw) 460 volts

COMPLETE FACTORY SAFETY GUARDS

Dimensions Height above ground 281.6″ (7150.1mm)  Below ground 37″  (939.8mm)
     Total over-all 331″ (8407.4mm)Ht. x 205″ (5207mm) F-B x 103.3″ (2623.82mm) Frame (192″ (4876.8mm) L-R with Catwalk)
Weight Press 242,500 lbs.      Weight Tool Table 22,100 lbs.

Current Replacement Cost 3,500,000.00 USD

You may view this item at our warehouse and see photos on our website at www.centurymachinery.com

Our Price to you at our Los Angeles, California warehouse is $725,000.00 US DOLLARS

Respectfully Submitted,
CENTURY MACHINERY CO., INC.      

Please feel free to contact us for more info.

 

Related products...