Description
1– used BRIDGEPORT VERTICAL MILLING MACHINE
Series 1 Serial Number Milling Head J281128
Serial Number Knee BR2562259
SPECIFICATIONS
SPINDLE:
Taper R-8
Collet Capacity ¾" (19.05mm)
Quill Travel 6" (152.4mm)
Quill Feed (per spindle revolutions) 0.0015", 0.003", 0.006" IPM
(0.0381, 0.0762, 0.124 mm.pm)
SPINDLE SPEEDS: Infinitely Variable thru 2-Speed Range 60-500 & 500-4200 rpm.
SPINDLE HEAD: Tilts Right/Left and Swivels Right/Left
EXTRA Height Under Spindle with 4" (1201.6 mm) Riser 25½" (647.7mm)
OVERARM: Moves In / Out 12” (305mm) and Rotates 360 degrees
TABLE: (3) T-Slots
Size Overall, 9" x 42" (228.6mm)
Longitudinal Travel, (X-Axis) 30” Manually & Power Feed 26" (660.4mm)
Cross-Slide Travel, (Y-Axis) 12" (304,8mm)
Vertical Travel Knee, (Z-Axis) 16" (406.4mm)
FEEDS: Table and Knee
Spindle Vertical Manual and Power
Table Longitudinal by Bridgeport Drive (X-Axis) Manual and Power
Table Cross Slide by Bridgeport Drive (Y-Axis) Manual and Power
Knee Vertical Rise and Fall by Servo Drive (Z-Axis) Manual and Power
MOTOR DRIVES:
Spindle 2 hp. 220/440volts
Table Longitudinal & Cross Feeds each & Knee Vertical Feed 0.45 Amps
Power Draw Bar
CONTROLS: Control voltage 115 volts
Remote Operator Control Station with High / Low & Off Buttons.
Spindle Rotation Forward / Reverse Switch.
Power Draw Bar with In / Out Buttons, & Pneumatic Lube
EQUIPPED WITH:
Sony 2-Axis DRO Table Longitudinal & Cross Travel Table Carriage.
(6) R-8 Collets. (1) Collet Power Draw Bar. Work Light.
COMPLETE FACTORY SAFETY GUARDS
Dimensions 60″ Depth x 60″ Width
(1524mm D Width x 83″ (2108.2mm) Height
Approximate Weight 3400 lbs.
![Ekstrom Carlson Vertical Router & Milling Machine, Model 540, Variable Speed100-5000 rpm, Tilting Table 18" x 36", Longitudinal Table Travel 30", Manual Spindle Travel 8", Serial Number 540-166 [M2824-4032]](https://centurymachinery.com/wp-content/uploads/2021/04/4032_ekstrom-carlson-vert-routing-mill_mdl-540_tilt-18-in-x-36-in_Ltrav-30-in_100-5K-rpm_S-trav-8-in_Serial-540-166-300x300.jpg "Vertical Milling and Router Machine Ekstrom Carlson Model 540 Variable Speed100-5000 rpm with Tilting Table 18 inch x 36 inch, Longitudinal Table Travel 30 inch, Manual Spindle Travel 8 inch, Serial Number 540-166, Inventory Reference M2824-4032] - Century Machinery")
![Cincinnati Milicron 5-axis Hydrotel Profiler Miller, Model 20V-80, Spindle Speed 20-10,800 rpm, Table 30" x 80", 30 ATC, 20 hp, Serial Number 85-414Q-001-1 [M1748-16972]](https://centurymachinery.com/wp-content/uploads/2021/04/6972-2_cincinnati-milicron-5-axis-hydrotel-profiler-miller_20V-80_30-in-x-80-in_20-3600-rpm_50-NS_30-ATC_20-hp_Serial-85-414Q-001-1-300x300.jpg "Cincinnati Milicron 5-axis Hydrotel Profiler Miller, Model 20V-80, Spindle Speed 20-10,800 rpm, Table 30\" x 80\", 30 ATC, 20 hp, Serial Number 85-414Q-001-1 [M1748-16972] - Century Machinery")
