Description
LAGUN VERTICAL MILLING MACHINE
Model FTV-2 Serial Number SE-13759
THIS MILL IS SET UP TO RUN ON 220 volts Single Phase
SPECIFICATIONS
SPINDLE:
Taper R-8
Collet Capacity ¾" (19.05mm)
Quill Travel 5" (127mm)
Quill Feed (Power per spindle revolutions)
.003", .0015", .006" IPM
SPINDLE SPEEDS: Infinitely Variable thru 2-Speed Range
55 thru 4250 rpm
SPINDLE HEAD: Tilts Up/Down 45º and Swivels Right/Left 90º
TABLE: (3) T-Slots
Size Overall 10" W x 50.25" L (1,0403 X 254mm)
Longitudinal Travel, (X-Axis) Manual 33″ (838mm)
Power Feed 30" (762mm)
Cross-Slide Travel, (Y-Axis) Manual & Power 16" (406mm)
Vertical Travel Knee, (Z-Axis) 16" (406mm)
FEEDS Table and Knee:
Longitudinal (Variable Feeds) Manual and Power
Knee Vertical Rise and Fall Manual
RAM:
Rotates 360 degrees
In/Out 22-3/16" (563.563mm)
MOTOR DRIVES:
Power in Phase-A-Matic Converter 220 volts, 1 phase
Spindle 2 hp (1.47 kw) 220-440 volts
1-Feed Drive 2.2 Amps. 110 volts
CONTROLS
Power Feed Rate Control on each drive.
Spindle Speed Variable Control.
Spindle Feed Rate Shift Lever.
Down/Stop/Up Switch.
EQUIPPED WITH:
Newall 2-Axis DRO Model B60, Serial K0137JK on
Table Longitudinal & Cross Travel
Table Power Feed Drive. 110 volts Single Phase
(12) R8 Collets (1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 15/32",
1/2", 9/16", 5/8", 11/16", 3/4")
Coolant Pump
One Shot Lubrication.
Phase-A-Matic Converter run mill at 220 volts Single Phase
COMPLETE FACTORY SAFETY GUARDS
Dimensions 67" (1701mm) LR x 60¾" F-B x 104" (2641mm) Height
Approximate weight 2,850 lbs
![Lagun Vertical Milling Machine, Model FTV-2, Variable Spindle Speed 55 thru 4250 rpm, Power Feed 10" x 50" Table, Phase Converter, DRO, 2 hp, Serial Number SE-13759 [M2824-10517]](https://centurymachinery.com/wp-content/uploads/2021/04/10517-1-lagun-vertical-mill-FTV-2-power-feed-10-in-x-50-in-tbl-vari-speed-55-4250-rpm-2-hp-phase-converter-DRO-Serial-SE-1375-RS-F.jpg "10517-1, lagun vertical mill, FTV-2, power feed 10 in x 50 in tbl, vari speed 55-4250 rpm, 2 hp phase converter, DRO, Serial SE-1375, RS-F")
![Lagun Vertical Milling Machine, Model FTV-2, Variable Spindle Speed 55 thru 4250 rpm, Power Feed 10" x 50" Table, Phase Converter, DRO, 2 hp, Serial Number SE-13759 [M2824-10517]](https://centurymachinery.com/wp-content/uploads/2021/04/10517-2-lagun-vertical-mill-FTV-2-power-feed-10-in-x-50-in-tbl-vari-speed-55-4250-rpm-2-hp-phase-converter-DRO-Serial-SE-1375-LS-F.jpg "10517-2, lagun vertical mill, FTV-2, power feed 10 in x 50 in tbl, vari speed 55-4250 rpm, 2 hp phase converter, DRO, Serial SE-1375, LS-F")
![Lagun Vertical Milling Machine, Model FTV-2, Variable Spindle Speed 55 thru 4250 rpm, Power Feed 10" x 50" Table, Phase Converter, DRO, 2 hp, Serial Number SE-13759 [M2824-10517]](https://centurymachinery.com/wp-content/uploads/2021/04/10517-3-lagun-vertical-mill-FTV-2-power-feed-10-in-x-50-in-tbl-vari-speed-55-4250-rpm-2-hp-phase-converter-DRO-Serial-SE-1375-Rear.jpg "10517-3, lagun vertical mill, FTV-2, power feed 10 in x 50 in tbl, vari speed 55-4250 rpm, 2 hp phase converter, DRO, Serial SE-1375, Rear")
![Lagun Vertical Milling Machine, Model FTV-2, Variable Spindle Speed 55 thru 4250 rpm, Power Feed 10" x 50" Table, Phase Converter, DRO, 2 hp, Serial Number SE-13759 [M2824-10517]](https://centurymachinery.com/wp-content/uploads/2021/04/10517-4-lagun-vertical-mill-FTV-2-power-feed-10-in-x-50-in-tbl-vari-speed-55-4250-rpm-2-hp-phase-converter-DRO-Serial-SE-1375-CU-tbl-R-end.jpg "10517-4, lagun vertical mill, FTV-2, power feed 10 in x 50 in tbl, vari speed 55-4250 rpm, 2 hp phase converter, DRO, Serial SE-1375, CU tbl R-end")
![Bridgeport Vertical Milling Machine, Series 1, Power Feed Table 9" x 42", Variable Speed 60-4200 rpm, , Slot Attachment, 2 hp drive, Serial Number Head J262241, Serial Knee BR257265 [M2824-9329]](https://centurymachinery.com/wp-content/uploads/2021/04/9329-1_bridgeport-vert-mill_series-1_PF-tbl-9-in-x-48-in_VS-60-4200-rpm_2-hp_slott-att_Serial-Hd-J262241-288x300.jpg "Bridgeport Vertical Milling Machine, Series 1, Power Feed Table 9\" x 42\", Variable Speed 60-4200 rpm, , Slot Attachment, 2 hp drive, Serial Number Head J262241, Serial Knee BR257265 [M2824-9329] - Century Machinery")
![Index Vertical Milling Machine Model 45, Variable Spindle Apeed 80-2750 rpm, Table 9" x 46.5", 1 hp, Serial Number 45-8283 [M2824-9437]](https://centurymachinery.com/wp-content/uploads/2021/04/9437_index-vert-mill_mod-45_tbl-9-in-x-46.5-in_80-2750-rpm_1-hp_Serial-45-8283-300x300.jpg "Index Vertical Milling Machine Model 45, Variable Spindle Apeed 80-2750 rpm, Table 9\" x 46.5\", 1 hp, Serial Number 45-8283 [M2824-9437] - Century Machinery")
![Cincinnati Milicron 5-axis Hydrotel Profiler Miller, Model 20V-80, Spindle Speed 20-10,800 rpm, Table 30" x 80", 30 ATC, 20 hp, Serial Number 85-414Q-001-1 [M1748-16972]](https://centurymachinery.com/wp-content/uploads/2021/04/6972-2_cincinnati-milicron-5-axis-hydrotel-profiler-miller_20V-80_30-in-x-80-in_20-3600-rpm_50-NS_30-ATC_20-hp_Serial-85-414Q-001-1-300x300.jpg "Cincinnati Milicron 5-axis Hydrotel Profiler Miller, Model 20V-80, Spindle Speed 20-10,800 rpm, Table 30\" x 80\", 30 ATC, 20 hp, Serial Number 85-414Q-001-1 [M1748-16972] - Century Machinery")
