Description
LAGUN VERTICAL MILLING MACHINE
Model FTV-2 Serial Number SE-13759
THIS MILL IS SET UP TO RUN ON 220 volts Single Phase
SPECIFICATIONS
SPINDLE:
Taper R-8
Collet Capacity ¾" (19.05mm)
Quill Travel 5" (127mm)
Quill Feed (Power per spindle revolutions)
.003", .0015", .006" IPM
SPINDLE SPEEDS: Infinitely Variable thru 2-Speed Range
55 thru 4250 rpm
SPINDLE HEAD: Tilts Up/Down 45º and Swivels Right/Left 90º
TABLE: (3) T-Slots
Size Overall 10" W x 50.25" L (1,0403 X 254mm)
Longitudinal Travel, (X-Axis) Manual 33″ (838mm)
Power Feed 30" (762mm)
Cross-Slide Travel, (Y-Axis) Manual & Power 16" (406mm)
Vertical Travel Knee, (Z-Axis) 16" (406mm)
FEEDS Table and Knee:
Longitudinal (Variable Feeds) Manual and Power
Knee Vertical Rise and Fall Manual
RAM:
Rotates 360 degrees
In/Out 22-3/16" (563.563mm)
MOTOR DRIVES:
Power in Phase-A-Matic Converter 220 volts, 1 phase
Spindle 2 hp (1.47 kw) 220-440 volts
1-Feed Drive 2.2 Amps. 110 volts
CONTROLS
Power Feed Rate Control on each drive.
Spindle Speed Variable Control.
Spindle Feed Rate Shift Lever.
Down/Stop/Up Switch.
EQUIPPED WITH:
Newall 2-Axis DRO Model B60, Serial K0137JK on
Table Longitudinal & Cross Travel
Table Power Feed Drive. 110 volts Single Phase
(12) R8 Collets (1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 15/32",
1/2", 9/16", 5/8", 11/16", 3/4")
Coolant Pump
One Shot Lubrication.
Phase-A-Matic Converter run mill at 220 volts Single Phase
COMPLETE FACTORY SAFETY GUARDS
Dimensions 67" (1701mm) LR x 60¾" F-B x 104" (2641mm) Height
Approximate weight 2,850 lbs
![Lagun Vertical Milling Machine, Model FTV-2, Variable Spindle Speed 55 thru 4250 rpm, Power Feed 10" x 50" Table, Phase Converter, DRO, 2 hp, Serial Number SE-13759 [M2824-10517]](https://centurymachinery.com/wp-content/uploads/2021/04/10517-1-lagun-vertical-mill-FTV-2-power-feed-10-in-x-50-in-tbl-vari-speed-55-4250-rpm-2-hp-phase-converter-DRO-Serial-SE-1375-RS-F.jpg "Lagun FTV-2 Vertical Milling Machine with Power Feed 10 inch x 50 inch Table and 2 hp Variable Spindle Speed 55 thru 4250 rpm DRO and Single Phase Power Converter, Serial Number SE-13759, Inventory Reference M2824-10517 - Century Machinery")
![Lagun Vertical Milling Machine, Model FTV-2, Variable Spindle Speed 55 thru 4250 rpm, Power Feed 10" x 50" Table, Phase Converter, DRO, 2 hp, Serial Number SE-13759 [M2824-10517]](https://centurymachinery.com/wp-content/uploads/2021/04/10517-2-lagun-vertical-mill-FTV-2-power-feed-10-in-x-50-in-tbl-vari-speed-55-4250-rpm-2-hp-phase-converter-DRO-Serial-SE-1375-LS-F.jpg "Lagun FTV-2 Vertical Milling Machine with Power Feed 10 inch x 50 inch Table and 2 hp Variable Spindle Speed 55 thru 4250 rpm DRO and Single Phase Power Converter, Serial Number SE-13759, Inventory Reference M2824-10517 - Century Machinery")
![Lagun Vertical Milling Machine, Model FTV-2, Variable Spindle Speed 55 thru 4250 rpm, Power Feed 10" x 50" Table, Phase Converter, DRO, 2 hp, Serial Number SE-13759 [M2824-10517]](https://centurymachinery.com/wp-content/uploads/2021/04/10517-3-lagun-vertical-mill-FTV-2-power-feed-10-in-x-50-in-tbl-vari-speed-55-4250-rpm-2-hp-phase-converter-DRO-Serial-SE-1375-Rear.jpg "Lagun FTV-2 Vertical Milling Machine with Power Feed 10 inch x 50 inch Table and 2 hp Variable Spindle Speed 55 thru 4250 rpm DRO and Single Phase Power Converter, Serial Number SE-13759, Inventory Reference M2824-10517 - Century Machinery")
![Lagun Vertical Milling Machine, Model FTV-2, Variable Spindle Speed 55 thru 4250 rpm, Power Feed 10" x 50" Table, Phase Converter, DRO, 2 hp, Serial Number SE-13759 [M2824-10517]](https://centurymachinery.com/wp-content/uploads/2021/04/10517-4-lagun-vertical-mill-FTV-2-power-feed-10-in-x-50-in-tbl-vari-speed-55-4250-rpm-2-hp-phase-converter-DRO-Serial-SE-1375-CU-tbl-R-end.jpg "Lagun FTV-2 Vertical Milling Machine with Power Feed 10 inch x 50 inch Table and 2 hp Variable Spindle Speed 55 thru 4250 rpm DRO and Single Phase Power Converter, Serial Number SE-13759, Inventory Reference M2824-10517 - Century Machinery")
![Lagun Vertical Milling Machine, Model FTV-2, Power Feed 10" x 50" Table, Variable Speed 55 thru 4250 rpm, Motor Drive 3 hp, Serial Number SE-39087 [M2824-10493]](https://centurymachinery.com/wp-content/uploads/2021/04/10493-1-lagun-vert-mill-FTV-2-power-feed-10-in-x-50-in-tbl-vari-speed-55-4250-rpm-3-hp-Serial-SE-39087-F-300x300.jpg "used Lagun FTV-2 Vertical Milling Machine with Power Feed 10 inch x 50 inch Table and Variable Speed 55 thru 4250 rpm, Motor Drive 3 hp, Serial Number SE-39087, Inventory Reference M2824-10493 - Century Machinery")
![Cincinnati Milicron 5-axis Hydrotel Profiler Miller, Model 20V-80, Spindle Speed 20-10,800 rpm, Table 30" x 80", 30 ATC, 20 hp, Serial Number 85-414Q-001-1 [M1748-16972]](https://centurymachinery.com/wp-content/uploads/2021/04/6972-2_cincinnati-milicron-5-axis-hydrotel-profiler-miller_20V-80_30-in-x-80-in_20-3600-rpm_50-NS_30-ATC_20-hp_Serial-85-414Q-001-1-300x300.jpg "Cincinnati Milicron 5-axis Hydrotel Profiler Miller, Model 20V-80, Spindle Speed 20-10,800 rpm, Table 30\" x 80\", 30 ATC, 20 hp, Serial Number 85-414Q-001-1 [M1748-16972] - Century Machinery")
