lagun-FT-1-vertical-milling-machine-power-feed-9-inch-x-42-inch-table-spindle-speeds-55-2940-rpm-2-hp-Serial-SE8702.-F. Ref 105712-1
lagun-FT-1-vertical-milling-machine-power-feed-9-inch-x-42-inch-table-spindle-speeds-55-2940-rpm-2-hp-Serial-SE8702.-F-RS. Ref 10571-2
lagun-FT-1-vertical-milling-machine-power-feed-9-inch-x-42-inch-table-spindle-speeds-55-2940-rpm-2-hp-Serial-SE8702.-LS-F. Ref 10571-3
lagun-FT-1-vertical-milling-machine-power-feed-9-inch-x-42-inch-table-spindle-speeds-55-2940-rpm-2-hp-Serial-SE8702.-LS. Ref 10571-4
lagun-FT-1-vertical-milling-machine-power-feed-9-inch-x-42-inch-table-spindle-speeds-55-2940-rpm-2-hp-Serial-SE8702. Rear-LS. Ref 10571-5
lagun-FT-1-vertical-milling-machine-power-feed-9-inch-x-42-inch-table-spindle-speeds-55-2940-rpm-2-hp-Serial-SE8702. Rear-LS. Ref 10571-6
lagun-FT-1-vertical-milling-machine-power-feed-9-inch-x-42-inch-table-spindle-speeds-55-2940-rpm-2-hp-Serial-SE8702. Down-view-RS-F-Table-KneeRef 10571-7
lagun-FT-1-vertical-milling-machine-power-feed-9-inch-x-42-inch-table-spindle-speeds-55-2940-rpm-2-hp-Serial-SE8702. Down-view-RS-F-Table-Knee, Ref 10571-8
lagun-FT-1-vertical-milling-machine-power-feed-9-inch-x-42-inch-table-spindle-speeds-55-2940-rpm-2-hp-Serial-SE8702. Down-view- Knee & Table, Ref 10571-9

used Lagun FT-1 Vertical Milling Machine 2 hp Power Feed Table 9 inch x 42 inch, 8-Spindle Speed 55-2940 rpm, with Collets & Coolant Pump, Serial Number SE8702, Inventory Reference M2824-10571

Model Number: FT-1

Serial Number: Serial Number SE8702

Reference No: Vertical Milling Machine & M2824-10571

Condition: Used

Mfg Date:

Model Number FT-1

Serial Number Serial Number SE8702

Reference Number Vertical Milling Machine & M2824-10571

Read More
1-213-627-2847
Categories: , , Tags: , , , ,

Description

LAGUN MODEL FT-1 VERTICAL MILLING MACHINE
  Serial Number SE8702

SPECIFICATIONS
SPINDLE:
  Taper R-8
  Collet Capacity ¾"
  Quill Travel  5"
  Quill Feed (per spindle revolutions)
    .0015", .003", .006" IPM
SPINDLE SPEEDS: 8 SPINDLE SPEEDS thru
   55 thru 2940 rpm
SPINDLE HEAD: Tilts Right/Left and Swivels Right/Left
OVERARM:  Moves In / Out and Rotates 360 degrees
TABLE: (3) T-Slots
  Size Overall, 9" W x 42" L
  Longitudinal Travel, (X-Axis) 28"
  Manually & Power Feed
  Cross-Slide Travel, (Y-Axis) 15"
  Vertical Travel Knee, (Z-Axis) 16"
FEEDS: Table and Knee
  Spindle Vertical, Manual & Power
  Table Longitudinal Manual and Power
  Table Cross Slide Manual
  Knee Vertical Rise & Fall Manual
MOTOR DRIVES: wired 220 volts, 3 phase
  Spindle 2 H.P. 220 / 440volts
  Coolant 1/8 hp
CONTROLS:
  Remote Operator Control Station with On/Off Buttons,
  Spindle Rotation Forward / Reverse Buttons.
EQUIPPED WITH:
  6-Collets
  1-Draw Bar                                                                                  
COMPLETE FACTORY SAFETY GUARDS

Dimensions 56" LR x 60" FB x 79" Height

Related products...