Description
1– used BRIDGEPORT VERTICAL MILLING MACHINE
Series 1 Serial Number Milling Head J281128
Serial Number Knee BR2562259
SPECIFICATIONS
SPINDLE:
Taper R-8
Collet Capacity ¾" (19.05mm)
Quill Travel 6" (152.4mm)
Quill Feed (per spindle revolutions) 0.0015", 0.003", 0.006" IPM
(0.0381, 0.0762, 0.124 mm.pm)
SPINDLE SPEEDS: Infinitely Variable thru 2-Speed Range 60-500 & 500-4200 rpm.
SPINDLE HEAD: Tilts Right/Left and Swivels Right/Left
EXTRA Height Under Spindle with 4" (1201.6 mm) Riser 25½" (647.7mm)
OVERARM: Moves In / Out 12” (305mm) and Rotates 360 degrees
TABLE: (3) T-Slots
Size Overall, 9" x 42" (228.6mm)
Longitudinal Travel, (X-Axis) 30” Manually & Power Feed 26" (660.4mm)
Cross-Slide Travel, (Y-Axis) 12" (304,8mm)
Vertical Travel Knee, (Z-Axis) 16" (406.4mm)
FEEDS: Table and Knee
Spindle Vertical Manual and Power
Table Longitudinal by Bridgeport Drive (X-Axis) Manual and Power
Table Cross Slide by Bridgeport Drive (Y-Axis) Manual and Power
Knee Vertical Rise and Fall by Servo Drive (Z-Axis) Manual and Power
MOTOR DRIVES:
Spindle 2 hp. 220/440volts
Table Longitudinal & Cross Feeds each & Knee Vertical Feed 0.45 Amps
Power Draw Bar
CONTROLS: Control voltage 115 volts
Remote Operator Control Station with High / Low & Off Buttons.
Spindle Rotation Forward / Reverse Switch.
Power Draw Bar with In / Out Buttons, & Pneumatic Lube
EQUIPPED WITH:
Sony 2-Axis DRO Table Longitudinal & Cross Travel Table Carriage.
(6) R-8 Collets. (1) Collet Power Draw Bar. Work Light.
COMPLETE FACTORY SAFETY GUARDS
Dimensions 60″ Depth x 60″ Width
(1524mm D Width x 83″ (2108.2mm) Height
Approximate Weight 3400 lbs.
